COMPUTER DIAGNOSTIC KEY @ Automotive online store

COMPUTER DIAGNOSTIC KEY Pulls diagnostic codes from computers in 84-94 Ford with EEC-IV and 81-93 GM vehicles. Chrysler vehiclesdo not need key.
Manufacturer: Wells
SKU: 10101-2006826

Accutire Tire Gauge is the most accurate tire gauge you can buy. Measurements are given in half-pound increments from 5 to 99 psi and are easily readable. Comes in a sleek aluminum case.
Manufacturer: Accutire
SKU: 34
Category: Automotive.Accessories.Racks

Replace your old fading vacuum shift motor with the rugged Posi-Lok. The 4x4 Posi-Lok is a driver operated manual cable system that replaces the failure prone vacuum engagement system. After engaging your transfer case, a one inch pull of the 4x4 Posi-Lok cable and your front axle is positively engaged. You canengage the front axle while sitting still or on the fly. With the 4x4 Posi-Lok, you will also be able to disengage the front axle while the transfer case is shifted into 4WD low to provide a true 2WD low! Complete installation takes under two hours with common hand tools.
SKU: 52435 00
Category: Miscellaneous

Off roaders are always demanding more wheel travel from their vehicles. In Wranglers, leafsprings are mounted closer to the wheels and tires and because of anti-sway bar suspension movement is more limited than on a CJ. Quick Sway Bar Disconnects help by allowing the front and rear axles to articulate completely independent of each other for much more suspension travel. By keeping your tires on the ground more of the time, you will have better off-road mobility. To disconnect the sway bar simply pull the lynch pins, tie the sway bar out of the way w/ ties and you are ready to crawl on the rocks.
SKU: 16060 01
Category: Miscellaneous

2-BOLT SUPPORTBRACKET FOR SPARE TIRE CARRIER Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2007134

COLOR-MATCHED STYLING KIT Drive a manual transmission? Want a totally coordinated look? Then this is the kit for you! All-in-one package includes pedal pads, leather shift knob and valve stem covers Brushed Aluminum Racing Pedal Pads. Ultra-lightweight pads feature colorful inserts. Accelerator, brake and clutch pads included. Leather Shift Knob. Color matched to inserts on pedal pads. Completely adjustable—replaces stock knob for a custom look and feel. Valve Stem Covers. Color matched to inserts on pedal pads. Set of 5.
SKU: 10101-2003021

Bridgestone Dueler A/T RH-S Tire pricedfrom $144.00.
Manufacturer: Bridgestone
SKU: Bridgestone Dueler A/T RH-S Tire
Category: Automotive Parts and Accessories Parts Tires

Introducing the new replacement soft top from Pavement Ends- the value- priced leader! TheReplay soft top beats comparable priced competitors in a feature for feature comparison every time. It's weatherproof fabric, available in 3 factory matched colors, is securely held together with strength-tested thread and is designed to fit factory original hardware. Other features include DOT-approved glass, rubber door seals, a Patented Truck-Under attachment system, and premium hook and loop fasteners, snaps and webbing.Throw in step-by-step installation instruction and a 1 Year Limited Warranty, and you have a soft top of great value. Talk about bang for your buck. Fits factory original hardware with half steel doors. Imported. Pavement Ends is the new kid on the block. Their mission is to make quality products and sell them at unbeatable prices. If you can find a better top at a lower price, buy it!!!!
SKU: 11114 17
Category: Miscellaneous

30 AMP 25' EXTENSION CORD WITH HANDLES 25' long! 30 AMPs! Easygrip handles 10 ga. grounded STW. 125V-3750W. One-year warranty. Camco Power Grip™ Electrical Adapters sold separately.
Manufacturer: Camco
SKU: 10101-2010432

The Weatherproof Carpet Bed Liner is a stylish yet durable alternative to plastic bed liners. The soft marine-grade carpet in comfortable for loading and unloading inside bed. Protects bed floor, sides and tailgate. Cargo won't slide around bed. Completely weather-proof, closed-cell foam; will not absorb moisture. Custom tailored to your long or short bed Dodge. Easily removes and installs with self-adhesive fasteners; no drilling required. Washable, synthetic fabric will not absorb dirt, oil etc. Constructed of a 12-oz. Marine-grade polypropylene, mildew-resistant carpet. Can be shipped via UPS.
SKU: 74050 502
Category: Miscellaneous

ROLL BAR PADDING Position where you want with offset hole location Padding constructed of closed-cell foam cut in 3-ft. sections with 1-1/2" diameter A hot look! Not approved for racing; recreational use only.
Manufacturer: EMPI
SKU: 10101-2003060

INNER FAIRING AND DASH TRIM KITS Kits include everything you need for a complete professional-looking renovation Refer to COMPONENT DIAGRAM link below to view a complete parts listing Premium-quality finish bonded to the special backing is incredibly thin (edges are almost invisible when installed) and flexible (conforms beautifully to every contour) Customize your bike's cockpit without spending a fortune! UV-resistant Gem-Flex™ polyurethane coating protects finish against peeling, cracking and yellowing. Custom designed for your bike—parts fit perfectly without trimming and look factory installed. Install it yourself and save more! Simply wash the mounting surface with a household cleaner and wipe down with the included alcohol pad. Then peel and stick on the adhesive-backed trim pieces. No tools required. Placement not quite right? Pieces caneasily be lifted and repositioned for up to 24 hours. No need to settle for anything less than perfection. View Complete Parts Diagram
SKU: 10111-2008975

COIL SPRING LOWERING KIT Lowers front or rear coil springs up to 3" without cutting, welding or heating For cars, trucks and vans. Includes 4 compressor assemblies to lower one pair of coilsprings.
Manufacturer: Hellwig Products
SKU: 10101-2005845

12-VOLT STAINLESS STEEL WIPER KITS Fits JeepCJ3B & MB. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2001998

STREET INDIGLO® MECHANICAL OIL PRESSURE GAUGE Electroluminescent white face that glows blue when you switch on the power Digital Morphing Control (sold separately; 49ZX9304P) lets you change the face color (from cool blue to neon green) and intensity for aradical look in any setting Made to the highest quality standards for unparalleled precision and accuracy 2" diameter. Range: 0-100 psi. Sweep: 270°. Ultra-slim design for easy mounting almost anywhere—all needed fittings and adapters are included. Vibrationproof air-core meter. Brushed aluminum bezel—different color bezels sold separately. Easy-to-read black numerals.
SKU: 10101-2008821

RACING-STYLE HOOD PIN AND HOOD LOCK KITS Keep the under-hoodarea safe and secure Must be used with factory hood latch Universal-fit kits All mounting hardware included.
Manufacturer: Pilot Motorsports
SKU: 10101-2009939

RAMP FEET Heavy-duty black rubber bottom wraps around end of plank and secures with pull-out-resistant nails Ensures no-bump loading/unloading Ridges on both top and bottom minimize ramp slippage Sold in pairs. Use with your own planks to create a custom loading ramp system—allows you to roll heavy items into your pickup bed or van almost effortlessly and with little lifting or back strain. Ramp capacities are approximately 1,400 lbs. a pair or 700 lbs. eachbased on use with common 2" x 8" (1-1/2" x 7-1/2" actual size) or 2" x 12" (1-1/2" x 11-1/4" actual size) fir plank. Use oak or maple for higher capacities.
SKU: 10101-2004718

PHAT MATS™ FLOOR MATS40-oz. ultra-high-quality nylon carpet with DUB® inspired designs Revolutionary FiberGraphics® designs are built to last—combination of bright colors and unique pattern makes your vehicle one of a kind Stain/wear-resistant tufted carpet lasts much longer than untufted carpet Whether protecting new carpeting or covering worn or damaged carpeting, these mats will add an incredible look to your interior. Heavy-duty nibbed backing keeps mats in place to reduce slipping and sliding. Approximately 18"W x 25"L. Sold in pairs for front floor area. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Coverking
SKU: 10101-2007393

COLORED DOME LIGHT BULBS Colored glass bulbs for longer-lasting original colorthan painted-color bulbs Before ordering, check owner's manual or base of bulb for type of bulb needed
Manufacturer: APC
SKU: 10101-2003652

RODGER DODGER™ Race ready—one of the hottest additions to the JC Whitney Hot Wheels® line! Prime example of the 70's muscle was everyone's "dream car" Amazing detail—huge blown engine, stylized rooftop stars and stripes, custom flames and Goodyear onthe tires This is the ideal complement for your other die-cast muscle cars and a perfect addition to your JC Whitney Hot Wheels® collection. Hot Wheels and associated trademarks are owned and used with permission from Mattel, Inc. © 2003 Mattel, Inc. All Rights Reserved. Goodyear trademark used under license to Mattel, Inc.
Manufacturer: Mattel
SKU: 10101-2000231

VISOR SHELF-IT™ CUSTOM-FIT DUAL OVERHEAD STORAGE CONSOLE Dual console mounts above each OEM sun visor to keep all your stuff out of the way, but always within easy reach Tough, durable OEM composite material available in colors to complement factory interior color Looks factory installed…console fits perfectly even if your truck has an OEM overhead center console Trouble-free no-drill installation! Simply detach existing visors and mount the storage console in the original visor bracket holes. Then reattach visors to storage consoles. 1"rim plus the elasticized net help keep items in place. Console features two 12-volt power outlets for cell phone, GPS unit and radar detector (wiring harness included). Console lowers the sun visors a few inches and may restrict field of vision through top part of windshield; this may be more noticeable for drivers over 6'3" tall.
Manufacturer: Pace Edwards
SKU: 10101-2009429

REAR TAILLIGHT Bolt-on installation—no drilling required Replacement lens sold separately Stop/tail/turn signal assembly for all '76-95 Jeep® CJ5s, CJ7s,Scramblers and Wranglers Class A reflex and built-in back-up lights. Assembled with bulbs and molded connectors (where indicated, modification of connectors required on '87-90 models). Driver-side assembly has molded-in license plate illuminator lens in bottom of housing. Replacement lens sold separately.
Manufacturer: Triplex Manufacturing
SKU: 10101-2003582

ILLUMINATED GAUGES Compare these prices anywhere! Dependable gauges are safer, more accurate than standard indicator lights. Choose your own combinations for a custom-matched look. 2" diam. with chrome or black bezels. Non-glare illuminated black faces have white numerals, red indicators. Tubing and fittings sold separately 529001. Mounting pads sold separately. Choices: oil pressure gauge; watertemperature gauge; 2 different ammeters.
Manufacturer: Equus
SKU: 10101-2008816

BOX-END S-SHAPED WRENCH SETS Choice of SAE or metric Carbon steel 12-pt. wrenches are approx. 5-1/4"to 9" long, S-shaped. 5 pieces/set.
SKU: 10101-2007975

HEAVY-DUTY MOLY AND WATER-INSOLUBLE GREASE Choice of heavy-duty moly grease (multi-purpose, with moly,EP, rust-inhibiting additives)or heavy-duty water-insoluble grease (temperature range: -30° to +500° F, 14-oz. cartridge).
Manufacturer: Lubrimatic
SKU: 10101-2009220

REAR WINDOW LOUVERS High-gloss, black ABS plastic can be painted For vans with stationary or pop-out windows Also shade van interior to help keep it cool. Easy to installand remove for fast window cleaning. With instructions. Sold in pairs only. Choose the custom-fit louvers according to your vehicle's make and year.
Manufacturer: Willpak
SKU: 10101-2009250

CONVERTIBLE TOP WELL LINERCovers the area underneath your convertible top Custom fit to your vehicle's exact specifications Heavy-duty black vinyl Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Kee Auto Top Manufacturing
SKU: 10101-2002690

DUBSPIN TRUMP SPINNING WHEELS AND TIRE PACKAGE Top-quality cast-aluminum triple-chrome-plated wheels from MHT and licensed by Davin—makers of the original Spinning Wheel Specially-designed high-speed sealed bearing lets your spinner keepon spinning long after you've stopped! Get looks wherever you go! Available in 22", 24" & 26" Rim Sizes for an additional cost Pirelli, Toyo, and Yokohama Tire packages also available Package includes 4 wheels, 4 tires (mounted and balanced), caps, lug nuts and valve stems. Manufacturer's limited one-year warranty against chrome chipping or flaking. Warranty does not cover curb damage or accidents. Sorry, returns are allowed only if wheels have not been installed on vehicle or driven on. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2003834

1/2" DRIVE PROFESSIONAL-QUALITY IMPACT WRENCH Bigpower! 400 ft./lbs. of torque. No-load speed: 6,500 rpm. Approx. 7-3/4"L, weighs 5-3/4 lbs. Air consumption at 90-psi: 4 cfm. Pin-type clutch.
SKU: 10101-2007648

CORVETTE L-88 FIBERGLASS HOOD SCOOPS Choose from regular or mini custom-styled scoops Direct and increase airflow to carburetor for better overall performance Great for restoration or knockout styling! Scoops add under-hood clearance for special carb setups, turbochargers and superchargers/blowers. Reinforced hand-laminated fiberglass is crack resistant. Smooth gel-coat finish can be painted (some surface prep required). Rivet, screw, bolt, bondor mold on (some drilling required). For a professional no-seam look, use body fillers (sold separately).
SKU: 10101-2010328

R-134A CHECK AND CHARGE KIT An easy, fail-safe method of diagnosing, charging and lubricating vehicle's R-134a A/C system Kit may be used on any vehicle that uses R-134a as it's refrigerant Works on vehicles originally equipped with R-134a and vehicles retrofitted from R-12 to R-134a One purchase can adequately recharge a typical R-134a A/C system not performing well due to a low system charge. In-line gauge allows for one connection to be madefor system checking and charging. Maxi Charge conveniently recharges system with R-134a refrigerant, Power Booster Oil Charge (provides enhanced lubrication resulting in quieter compressor operation, reduced friction and more efficient A/C system cooling) and Leak Stop and red dye (to help visually identify larger system leaks). Kit includes 14 oz. Maxi Charge, hose with in-line pressure gauge and complete instructions. Note: Not for sale in Wisconsin.
SKU: 10101-2002873

MOUNTING ANTENNA PAD WEATHERSTRIPPING OEMquality Easy to install Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Metro Molded Parts
SKU: 10101-2003388

STEEL FRONT FLOOR PAN REPAIR PANEL Repair rusted or damaged area yourself! For Jeep® CJs and Wranglers 19-gauge cold-rolled steel. Fits over or replaces original section. Can be welded in place. Trimming oforiginal section may be required. Some bodywork experience may be necessary.
SKU: 10101-2000441

2-PIECE FRONT ECONOMY 18OZ CARPET MAT SET FOR VANS Long-wearing, heavyweight, cut-pile 18-oz. poly carpetNibbed backing keeps mats in place and prevents curling No-ravel cloth-bound edges Affordable floor protection! Tailored to fit—no cutting or trimming. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2007332

LED UNDER-CAR KIT Unique light-diffusing tubes produce a wider band of light plus the smoothest glow under and around your car…without hot spots! Control module lets you select the sequential lighting movement (9 different patterns available) and speed of movement Built-in music interface allows lighting to react to changing sounds LED lighting—more durable and require less power usage than neon! Each 48" tube includes 45LEDs, each 30" tube includes 30 LEDs. That's an ultra-bright total of 150 LEDs! Kit includes: two 48" LED tubes and two 30" LED tubes.
SKU: 10101-2003674

HEAT-SEALED CONNECTOR KITS Essential for outdoor, under-hood or under-car connections! Heat sealing forms a weather-tight, waterproof connection! Kits include 3 sizes of butt connectors to fit all splicing wire (22- to 10-gauge). Lock out the weather and moisture when splicing wire! Simply crimp connector to splice the 2 wires together, then heat special protective covering with match or lighter. Covering will shrink aroundwire and connector to form strong, water/weather-tight seal. Great for automotive wiring (trailer hitch, fog/driving lights, under-car hookups), electronic work, outdoor lighting around home, etc.
SKU: 10101-2007740

BT014 ULTRA-HIGH-PERFORMANCE TUBELESS RADIAL MOTORCYCLE TIRES Superior performance for the aggressive street rider—innovative tread design improves traction, shock absorption and noise reduction Front tire has new Kevlar cross-belt construction for light handling, improved feedback and stability Rear tire has cap/base construction underlying layer to control tread stiffness and provide reinforcement and shock absorption Gives you lighter, better straight-away stability and shock absorption than cross-belt construction tires. Silica-rich exterior compound offers all-weather performance, extended tire life and superb cornering. Innovative tread design improves traction, shock absorption, noise reduction and performance on wet roads. Z-ratedto withstand speeds over 149 mph. Comprehensive Tire Design Method improves contact patch for linear handling and exceptional cornering. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. DSC : Description LR : Load Rating
Manufacturer: Bridgestone
SKU: 10101-2009984

VOLKSWAGEN & REG TRANSAXLE PLUG HEX SOCKET For removing and installing transmission drain and fillplugs. 3/8" drive 17mm hex socket.
Manufacturer: Lisle
SKU: 10101-2004225

GUN BOOT® IV Anatomically designed to accommodate left- and right-hand bolt-action guns Rugged, built-to-take-it polyethylene shell Plush-pile-lined interior gently "cradles" your expensive gun Holds any rifle or shotgun. Accepts 50mm scope and/or sling. Hard case features a molded-in carry handle, heavy-duty padlock provision (lock not included), rounded corners and nose plus 4 lash-down points. Front and rearfeet allow case to sand upright. Fits easily into the tightest spots. Mounts securely to any ATV with a bracket (sold separately).
Manufacturer: Kolpin Outdoors
SKU: 10101-2007160

CHROME-PLATED HEADLIGHT VISORS These headlight accents allow you to use your high beams without blinding oncoming motoristsfor safer nighttime or bad-weather driving. Easy installation. Note: Check local laws regarding use.
Manufacturer: Dee Engineering
SKU: 10101-2002064

HOOD PROTECTOR Full height—stands closer to the hood than other shields GE Lexan®—virtually unbreakable Low-profile mounting blends into truck's body lines Lund®'s best value! Smoke tinted. Mounting hardware and instructions included. No drilling required for most trucks. Shipped separately from factory. NOTE: SKU numbers ending in F are factoryshipped and may take a little longer to reach you.
Manufacturer: Lund
SKU: 10101-2004956

RIDE CONTROL HELPERS Calibrated pitch is designed to soften the ride while increasing load-carrying capacity from 750 to 1,250-lbs. 14" long x 2-1/4" I.D. Fit shock absorbers with up to 1-7/8" O.D. dust covers (largeupper end of shock) and 1-5/8" O.D. cylinder (smaller end of shock). Specify heavy-duty shocks with up to 2-1/4" O.D. dust covers. Includes positioning cups, hardware and instructions. Choose 750- or 1,250-lb. capacity. Sold in pairs.
SKU: 10101-2005874

RECEIVER-MOUNT OVAL TUBE STEP Fits all 2" receiver hitches Big 4" diameter straight tubular bar is approximately 22" long Oval tubing puts a wider stepsurface at your feet Makes it easy to reach gear stored in truck bed or in roof rack. Easy to install—secures with existing hitch pin. Built-in anti-wobble adapter. T-304 steel. Black nonslip plastic step pads and end caps.
SKU: 10101-2009486

REPLACEMENT HELMET BAG Soft, padded nylon bag with locking drawstring closure Replacement face shield and side pods (including mounting hardware) sold separately Holds any helmet!
SKU: 10101-2000191

CHROME ALUMINUM HOSE END COVERS Hex shaped polished and deep anodized aircraft aluminum Covers hose ends and hose clamps for that "finished" look Available ina variety of sizes. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Racing Power
SKU: 10101-2005376

MODEL KD-G200 HIGH-POWER CD RECEIVER Features CD player, tuner, amplifier and more for incredible sound quality! cEQ equalizer with one user preset and 5 factory presets (rock, classic, pop, hip-hop, jazz). Rotary encoder for instant control over should levels and a variety of settings (including clock functions). CD-RW compatible. Blue LCD display. Switchable dimmer. Ergo switch for better control and easier operation. Advanced Sound Control Memory. Maximum power output: 50 Watts x 4. CD PLAYER: 1-bit D/A converter (hologram pick-up virtually eliminates errors while digital servo compensates for disc distortion). Direct Track Access. CD track control functions (skip, search, repeat, random play). CD-R compatible. TUNER: HS-II PLL synthesized tuning. 24 presets (18 FM, 6 AM). SSM (automatically stores 6 strongest FM stations). AFNS/PNC. Seek, scan, stereo/mono switch. AMPLIFIER: Electronic volume control, loudness and bass/treble controls. 2-volt line output level. Preamp fader control. PLUS: Sound Control Memory (SCM). Power-off mode eject. COMPU PLAY. Preferred Setting Mode (PSM). Power switch standby illumination. Detachable control panel with carry case. Line output terminals. SIZE: 7"W x 2"H x 7"D.JVC terms you should know   Term   Definition • Direct track/disc access Go to exact track/disc you want (1-12) with a push of a button • HS-II Ends drift, eliminates noise in weak FM, supresses distortion from interface • AFNS/PNC Reduces high-frequency/ignition noise, interference, distortion • SCM (sound control memory) Apply a precustomized EQ to music (pop, beat or soft) or create a custom EQ • Advanced SCM Same as SCM, but also lets you "link" an EQ to each source (beat for CD, pop for FM, etc.) • COMPU PLAY Play starts the instant you select a source (FM, CD) or insert a CD or tape • Power-off mode eject Eject disc/tape with ignition off • PSM (preferred setting mode) Puts you in instant control over sound & settings
Manufacturer: JVC
SKU: 10101-2001527

EMERGENCY BELT Excellent replacement for damaged fan belts, alternator and power steering belt Snap the links apartto adjust for desired belt length—no cutting, no tools required! Open ended to bypass mounting obstacles Durable polyurethane resists heat, cold, oil, water and chemicals. Transmits same horsepower and provides unmatched speed of installation. Orange color. Limited one-year warranty.
Manufacturer: WIRTH CO
SKU: 10101-2008175

POLYCOTTONDRILL CAB COVER FOR JEEP® Good indoor protection at a very reasonable price! Breathable drill weave polycotton construction Keeps dirt and dust off your Jeep® while allowing full air circulation to minimize moisture buildup Tailored to fit perfectly! Helps protect valuables by keeping them out of sight. Durable, breathable woven drill fabric is treated to resist water and to prevent rot and mildew. Overlapped seams with double-needle stitching. Neoprene elastic in front and rear hems ensures the snuggest fit possible. Gray color. Cover fits completely with top up. Note: Rear-mounted spare tire is considered standard equipment. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Covercraft
SKU: 10101-2004550

DELUXEMOUNTING KIT For ball joints and link pins Urethane bushings with stainless steel T-bolt clamps included.
SKU: 10101-2005781

CHROME-PLATED WIRE TIES Dress up any application withchrome-plated wire ties! Combine with Chrome Convoluted Tubing (Item # ZX265804) for a cleaner, neater
Manufacturer: Taylor
SKU: 10101-2010060

SPARE WIPER ARM AND BLADE FitsJeep CJ3B & MB. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2001999

STANDARD AUXILIARY AUTOMATIC TRANSMISSION FILTRATION SYSTEM Prolongs the life ofyour automatic transmission for RVs, fleet vehicles, racecars or heavy-towing vehicles Helps prevent premature failure when vehicle is under heavy stress, or during normal driving Perma-Cool filter (included) continuously cleans the transmission fluid & prevents sludge/varnish formation that can clog passages and cause problems. Add-on filtration system increases fluid system. Exceeds manufacturers filtration requirements. Ideal for RVs, towing vehicles, taxis, ambulances, police/fire vehicles even racecars with high-stall-speed converters and/or racing transmission. Includes: mounting bracket, sending unit & wiring plus filter mount, high-pressure/high temperature transmission hose, brass fittings, stainless steel hose clamps, hardware, instructions. Recommend changing filter when transmission is serviced or fluid replaced. Replacement 50,000-mile filter element available.
Manufacturer: PERMA COOL
SKU: 10101-2009683

1-3/4"OD STAINLESS STEEL RADIATOR HOSE Can be cut to any length The end of uggly rubber hoses—hot finish/color brightens your under-hood area! Shapes into any configuration to create a unique look and aids in cooling Withstands vibration. Corrosion-resistant 300series stainless steel hose. Order matching/contrasting 6061-T6billet aluminum hose end caps for a complete look (sold separately; 20212G).
Manufacturer: Flexicool
SKU: 10101-2010175

MOTOROIL Revolutionary technology allows this oil to adhere better to all metal surfaces Stronger lubricating film significantly reduces friction…even during cold-weather starts Protects better than conventional oils with Synerlec Specially formulated SAE grades suitable for all engines. The best oil you can buy for an OEM motor…excellent for turbo and injected motors. Reduces heat…helps keep motor clean to improve gas mileage, reduce oil consumption and extend engine life. One quart.
Manufacturer: Royal Purple
SKU: 10101-2000799

UNIVERSAL DOOR, TRUNK AND HATCH WEATHER STRIPPING Includes internal metal clips Flexible black rubber conformsto almost any shape…won't crack or deteriorate Replaces worn-out weather stripping…helps prevent water and air leaks Internal metal clips in windlace secure tightly to any 1/16" to 1/4" thick metal. 13-1/2 ft. length. To receive a weather strip sample, call (877) 927-7427.
SKU: 10101-2008604

REPLACEMENT CATALYTIC CONVERTER KIT INCLUDES CLAMPS Air Tube Conversion Kit (sold separately) to be used with 50ZX4940BF or 50ZX4942YF (sold separately). Shippedseparately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2006221

PERFORMANCE DISTRIBUTORS The perfect replacement for the factory distributor in your late model car or truck 6061 T6 Billet aluminum housing Centerless ground steel shaft10,000 RPM bearing upper with oil lite bushing lower. Accel® performance electronic pick up and module. High dielectric strength cap and balanced rotor. Brass cap and rotor contacts. Iron or steel distributor gear compatible with flat tappet cams and OEM hydraulic roller camshafts. May be used with an Accel®, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Legal in all 50 states as a replacements part.
Manufacturer: Accel
SKU: 10101-2009924

FAIRING WIND DEFLECTOR SET For '88-2000 Honda GL1500 Gold Wind® models Strong, contoured acrylic panels Chrome-plated mounting arms, backing plate, top-hand adjustment knob and hardware to enhance the custom styling Notched top and bottom ensure panels fit snugly against fairing for better airflow control, maximum riding comfort and less airmovement behind the closed panels. Mount with existing hardware. No drilling required. Panels are approximately 7"W x 10-1/2"H. Set includes right and left sides plus instructions.
SKU: 10101-2000692

WEATHER STRIPAND SEALS Stop leaks, rattles and whistling Automotive-grade black EPDM sponge rubber is sunlight and ozone resistant For '71-76 GM convertibles Custom extruded and molded with detailed ends to fit convertible perfectly.
Manufacturer: Metro Molded Parts
SKU: 10101-2008655

CHAIN HOIST TROLLEYS Allows your stationary chain hoist to be moved along an I-beam Order by weight (1/2-, 1-or 2- ton) and beam size Adjust to 9 different I-beam sizes Ball-bearing construction. Cannot be shipped express.
SKU: 10101-2008247

MINI CHROME-PLATED DUAL-INTENSITY MALTESE CROSS LED ACCENT MARKER LIGHTS Deluxe dual-intensity 29-bulb LED light bank works like a dual-filament bulb to provide 2 levels of brightness Lights can be used as accent markers or running light and as auxiliary turn signals or auxiliary brake lights Maltese cross housing perfectly matches the contours of the Maltese cross lens Custom-styled lights are eye-catching alone or with other Maltese cross accessories! Sensational on saddlebags, fairing or travel trunk. 12-volt lights include 3pigtail wire connections and a 10mm threaded hollow mounting stem with hardware for easy installation. Some drilling required. Sold in pairs.
SKU: 10101-2003403

SAFARI-STYLE STRAPLESS BIKINI TOP Reinforced edges to eliminateflapping Made of high-quality color-matched Haartz™ fabric Extend farther over sport bar for front-to-back coverage Complete with industrial-grade buckles and webbing. NOTE: (A) or (B) Windshield Channel REQUIRED. Comes complete with mounting screws. Some drilling of windshield frame required to install.
Manufacturer: Bestop
SKU: 10101-2010540

SK® SAE 10-PIECE SEMI-DEEP IMPACT SOCKET SET Designed to provide added reach over standard sockets, yet fitin tight spaces where deep sockets are too long Packaged on a metal rail Corrosion-resistant black-coated steel lasts for years. Includes 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16" and 7/8" sockets. Manufacturer's lifetime warranty. Made in USA.
Manufacturer: SK Hand Tool
SKU: 10101-2007870

CUSTOM-FIT TAILLIGHT COVERS Protection for your taillights never looked so good! Revolutionary 3D European styling Heavy-duty, impact resistant acrylic Easy to install and remove—no drillingneeded. Perfect match to GTS® Pro Beam Custom-fit Headlight Covers (sold separately). Sold in pairs. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. IMPORTANT NOTE: These covers are designed for show, competition and off-road use only.
SKU: 10101-2010108

FUEL SYSTEM CONNECTOR OE-quality replacements for damaged sections of fuel line assembly Saves youmoney—replace just the damaged area rather than the entire assembly
Manufacturer: Dorman
SKU: 10101-2005768