CUSTOM-TAILORED MOTORCYCLE COVER @ Automotive online store

CUSTOM-TAILORED CYCLE COVER Custom fits cruisers with or without sissy bar, saddlebags and/or windshield—special expandable pockets are the secret! Made of 300-denier polyester, urethane coated for dependable water, weather and mildew resistance Windshield section interior is lined with soft, non-scratch material. Scorch-resistant aluminum metallized inside lining on lower sides and rear withstands heat from engine and exhaust. Folds and stores neatly in its own carry bag. Protects against the elements. Breathable—moisture can escape before it damages bike's finish. Custom designed to fit over saddlebags and rear mini fender racks. Special zippered pocket panelsallow cover to fit over sissy bars up to 15"H and/or windshields that are 12" higher than top of original mirrors. For clean look, panels store inside cover if not needed. Elastic cord sewn into the entire hem, rust-resistant grommets and 2 stretch cords (included) help keep cover securely in place.
SKU: 10101-2004512

LED ARROW TURN SIGNAL BLINKERS OR MARKER LIGHTS Use as super-bright turn-signal blinker or auxiliary lights Blinkers increase visibility when turning or changing lanes, alerts other drivers Each blinker incorporates 10 brilliant, long-lasting LEDs Rear facing blinkers mount easily and securely on mirrors, rear window or tailgate with super-strong acrylic tape. Some drilling required.Easy 2-wire hookup. Wiring harness and instructions included. Sold in pairs. Red housing is approximately 2"H x 2"L x 5/8"D.
Manufacturer: Pacer Performance
SKU: 10101-2003477

The perfect fit for sportsmen! Available in Olive, Yellow orOrange
SKU: 15150 15
Category: Miscellaneous

LOWER SECTION OF PILLAR Restore original look and save big over expensive body shop prices Top-quality die or custom formedScrew, rivet or weld on Be sure to test fit new panel before cutting off old one. Leave some overlap to ensue enough surface space for a good weld. Some surface prep is needed before painting. Plan ahead, take you time—problems can occur if you rush the job!
Manufacturer: Tabco
SKU: 10101-2000373

Theall-season solution for replacement of soft upper half doors. No more fumbling with zipper pulls, only to have the soft window fold on your arm. These scratch-resistant glass sliding windows have an easy-to-use latch mechanism to quickly slide open the large window. Better for drive-in or toll booth. The area surrounding the window is manufactured of the exact material as the original Jeep top. **1987 Wranglers will require door rail kit #11021.xx, please order separately**For use with aftermarket tops with rounded corners (Supertop, Sunrider, Ultratop).
**Front panel is fixed**
SKU: 11034 109
Category: Miscellaneous

STABILIZER JACK SET Easy to adjust with speed crank—no need to crawl under trailer Designed for precise leveling and stabilizing of pop-up and lightweight travel trailers. Rust-resistant heavy-duty steel jacks are sturdy (750-lb. static load per leg).Bolt to frame cross members and adjust from 3-1/2" to 17" high. Set includes 2 jacks, speed crank, hardware, instructions. Manufacturer's limited lifetime warranty. Order 2 sets to level/stabilize front and rear of trailer.
Manufacturer: Norco Industries
SKU: 10101-2008285

22" PIAA Super Silicone Wiper Blade (EA) priced from $22.00. PIAA Super Silicone Wiper Blades priced from $22.
Manufacturer: PIAA
SKU: 22" PIAA Super Silicone Wiper Blade (EA)
Category: Automotive Parts and Accessories Parts Accessories

Great designs by Kayline. The Half top model covers the front seats and ends in the front of the roll-over bar. Rear window rolls up for ventilation. All kits complete with soft doors and also allow the use of full-height hard doors. All hardware and fittings are included. 11 colors to choose from. Please note that the half top cannot be used with a roll bar mounted shoulder harness and therefore should never be installed on a vehicle which has a factory supplied shoulder harness.Don'tmiss the new Fasttrac railmounted tops that eliminates drilling for snaps, and forms a continuous body seal. The perfect tops for restored Scramblers with pristine bodies. The Fasttrac half top can be used with a new, optional tonneau cover (#21080) that protects the exposed bed from the elements and covers your belongings for a finished look.
SKU: 21078 01
Category: Miscellaneous

Add rugged good looks to your F-150, Super Duty or Expedition while making entering and exiting easier with these 3"" diameter side nerf bars. Non-slip step pads help you climb in and out of your vehicle. Made of heavy-duty steel, they bolt directly to the frame and also protectthe rocker panels.
SKU: 71202 192
Category: Miscellaneous

3-PC. ADAPTER SET For impact wrenches Hole to lock onto drive tang Features drop-forged chrome-vanadium steel, heat treated and oil quenched for strength with black oxide finish for longservice life. Set includes: 1/4" (F) x 3/8" (M), 3/8" (F) x 1/2" (M), 1/2" (F) x 3/4" (M). M=male end. F=female end.
Manufacturer: Peak Power Products
SKU: 10101-2007877

NONASBESTOS SEMI-METALLIC DISC BRAKE PADS AND BRAKE SHOES Help restore braking control and stopping power! Restore lost braking efficiency, control and performance due to worn orfaulty brake pads Maximum braking control at all speeds in all driving conditions Feature low-friction nonasbestos brake material compound bonded to steel backing—won't shear or separate. Special, refined composition of sintered metallic powders mixed into the organic compounds for maximum durability and performance. Meet or exceed all original-equipment requirements or specifications. Set of 2 pads for one rotor/caliper or 2 shoes for one brake drum. If front wheel has 2 rotors/calipers, order 2 sets.
SKU: 10101-2008479

SUPERFLOW SINGLE CAT-BACK EXHAUST SYSTEM KIT 50-state legal system engineered for maximum pulling power The only system heavy duty enough for off-road use Tubing and muffler are aluminized for long life. Big 3" diameter tailpipes. Boosts horsepower up to 17%. Mandrel-bent, 16-gauge heavy-duty steel tubing for unrestricted flow. Fully welded muffler has baffled chambers (no packing) to produce more power and a mellow sound. Giant T304 stainless steel tip will not rust. Installs easily behind catalytic converter. Includes all exhaust pipes from the converter back, muffler, tip, hardware and instructions. Shippedseparately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Gibson Performance Exhaust
SKU: 10101-2006423

ONE-WIRE ALTERNATORS One-wire, direct-to-battery hook-up Choose 60-amp, high-output 80-amp or high-output 80-amp with chromed housing Install easily—simply mount alternator, attach belt and hook up to one 10-gauge wire (order separately). Bypass hard-to-find electrical problems that are caused by ignition switch, volt gauge, external voltage regulator. Rugged, dependable GM-type alternator has built-in current-monitoring voltage regulator to activate charging automatically whenever needed. Re-manufactured to exacting tolerances using new bearings, brushes, voltage regulator and diodes. Include single-groove pulley. Alternator for 6-volt systems replaces original generator—no need to alter remainder of original 6-volt electrical system. Fit all vehicles with OE 40- to 65-amp GM alternator without modification; mounting in other vehicles may require fabrication of mounting brackets. For negative-groundsystems only.
Manufacturer: PROFORM
SKU: 10101-2005056

HEADER-LOOK CHROMED SIDE PIPE KITS Connects to headers or stock exhaust system Increases horsepower, improves performance Available with big 3" or 3-1/2" diameter chrome-plated side pipes The look of anexpensive tuned header/side pipe exhaust system—at a fraction of the price! With one functioning inlet tube and 3 dress-up tubes. Kit features built-in high-flow mufflers (with efficient 6-sided louvered cores) to absorb noise, but not horsepower! Easy installation. Two welded brackets on each pipe allow easy, secure attachment of L-shaped hangers with nuts and bolts. Kits include: 2 complete pipes with 4 tube collectors, installation hangers, nuts and bolts. Choice of 3 lengths to accommodate virtually all applications. Choose various lengths with kit with 3" diameter pipes and kit with 3-1/2" diameter pipes. Note: Length of side pipes is measured from the bend in the collector to the end of the side pipe. Cannot be shipped express. Please check local emission laws before ordering.
Manufacturer: PATRIOT
SKU: 10101-2006249

SPARE TIRE COVER Water-repellent vinyl with soft, nonscratch backing protects the spare tire on your RV, van or motor home Sized to custom-fit yourtire Features adjustable, elasticized back hem for a snug fit Great protection against the sun and elements. Easy to clean. Limited 3-year warranty.
Manufacturer: Classic Auto Accessory
SKU: 10101-2003886

LEAF SPRING PERCHES A must when converting your leaf springs to an over-axle application or whenreplacing collapsed perches Also work for installing wide leaf springs or relocating leaf springs Weld-on installation Sold in pairs.
Manufacturer: WP Warrior Products
SKU: 10101-2005979

General Exclaim Tire priced from $51.00 to$60.00.
Manufacturer: General
SKU: General Exclaim Tire
Category: Automotive Parts and Accessories Parts Tires

Original rubber mounts are so soft that they crack, distort, and crush so badly they often fall out. Energy Suspension's specially formulated polyurethane body mounts combine the best qualitiesof softness for a smooth ride, yet rugged enough for the most demanding off road trails. Mounts have a steel ring molded into the end for added durability no matter how harsh the terrain. CJ kits DO NOT include body mount washers.
SKU: 16058 36
Category: Miscellaneous

PT CRUISER VALVE STEMS Licensedlogo valve stems for all 4 wheels and spare tire Made of high-quality anodized metal Includes key ring and wrench to tighten the valve stems Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Autotecnica
SKU: 10101-2003915

WINDOW CONVERSION KITS Get Cal-look windows and retain function! One-piece window glass fits into stock window area,eliminates factory vent window and division bar. Includes all necessary materials for customizing both front door windows: 2 pieces of tempered automotive safety glass; 2 upper window channels; 4 anti-rattle weather-strips; and instructions. Original doorstops must be removed—custom kit available. '52-64 Beetle requires use of '62-68 Beetle window regulators and sashes, or order regulator kit (sold separately). Choose clear or gray-tinted glass. NOTE: Use of tinted window may be prohibited by state or local regulations. Shipped directly from manufacturer—UPS Next and 2nd Day not available. Allow 3 to 4 weeks for delivery.
SKU: 10101-2000603

These soft comfortable seat covers will keep your seats cool in the summer and warm in the winter. Easy to install, our tweed seat covers will protect your seats or cover-up unsightly rips. Sold separatelyfor front seat applications in blue, tan or gray.
SKU: 74270 524
Category: Miscellaneous

Skyjacker has been building suspension systems for over 25 years. They invented Softride Technology - which enhances every aspect of leaf spring performance and delivers all the rugged off-road handling you need, while providing a smooth street ride. All Suspension Kits come with 4 Nitro Shock Absorbers. All Lift Systems come with new front coil springs, new rear leaf springs along with U-bolts, lower control arms, bump stops and all necessary hardware. All Class 1 Systems include a pair of rigid, fixed length, lower control arms.The 4.5" and 5" Lift Systems also include upper control arms, steering stabilizer, upper and lower control arm relocation brackets, track bar bracket, sway bar brackets and a dropped pitman arm. The 4.5" and 5" Lift Systems will accommodate up to 36" tall tires with no modifications.
SKU: 76110 504
Category: Miscellaneous

BIG TEX™ GRILLE GUARDS They don't get any bigger than this! Beefier, thicker and more massive than any grille guard available! Texas size, unique design and heavy outside welds create a grille guard that won't bend, flex or vibrate in use Ultimate front-end protection! Custom-designed to accent pickup's lines. Giant one-piece 1.9" 14-gauge steel frame. Die-formed heavy-duty 11-gauge steel uprights are contoured to fit bumper for maximum strength. All are over-the-headlight style grille guards (except where noted as low-profile style) include nonreflective tape on rear tube to prevent glare in driver's eyes. The low-profile style indicates guards are below hood line. Easy, no-drillframe-mount installation for most applications. Matching wire frame headlight guards available (sold separately) for brush guard sections. Bolt-on light tabs (included) let you mount auxiliary lights or heavy-duty rubber push pads (pads not included). Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. SKU numbers ending in FE are factory shipped by truck freight.
Manufacturer: Go Industries
SKU: 10101-2009505

SPORT-STYLE WINDSHIELDS Quick mount and release windshields slip on in seconds to provide instant protection and remove just as easily Available in 2 sizes, clear or light smoke tint, for cycles with 7/8" or 1" diam. round handlebars For all cycles with round or rectangular headlights Shatter-resistant acrylic windshield with headlight cutout. Meet or exceedDOT specifications. Instructions included. Order by handlebar size.
Manufacturer: Maier Mfg
SKU: 10101-2000671

22" PIAA Super Sporza SiliconeW/Spoiler Wiper Blade (BLK) pricedfrom $24.00. PIAA Super Sporza Winged Wiper Blades priced from $24.
Manufacturer: PIAA
SKU: 22" PIAA Super Sporza SiliconeW/Spoiler Wiper Blade (BLK)
Category: Automotive Parts and Accessories Parts Accessories

HIGH-SPEED 8",9" & 12" TUBELESS TIRE Designed forgood cornering and floatation for boats and camping trailers Enjoy carefree, trouble-free and safe driving with these high-quality tires Long-wearing ozone-protected wraparound treads for maximum mileage Nylon cord body. Meets DOT standards. Cannot be shipped express.
Manufacturer: Duro Tire
SKU: 10101-2003957

FRONT STRUT ROD BUSHINGS KIT For '88-97 Acura and Honda cars Replaces stock or worn bushings perfectly Eliminates "play" common torubber bushings for faster response and better overall handling! Urethane bushings are precision designed and engineered to exact tolerances. Number of bushings in kit varies, depending on application.
Manufacturer: Dee Engineering
SKU: 10101-2005798

The 4xRac is designedto be mounted on bumpers for convenient off-road storage. Comes complete with hardware and requires some drilling.
SKU: 92200 04
Category: Miscellaneous

CHROME-PLATED TIMING TAB For'59-86 Chevrolet small-block engines
Manufacturer: PROFORM
SKU: 10101-2005394

DUNSTALL STYLE MEGAPHONE MUFFLER Helps restore performance and acceleration lost due to faulty or malfunctioning muffler Chrome-plated extra-long 27" muffler with seamless body flares to 4" diameter and features a welded-on cone tip with rolled finished edge Fiberglass wrapped removable baffle core Heavy-gauge steel helps reduce backpressure and restore power, acceleration and fuel economy. Adjustable welded-on reversible sliding track mounting bracket and included mounting clamp make for easy left- or right-side mounting. Includes reducers to fit over 1-3/8" 1-1/2" and 1-5/8"OD pipes. Due to extra-long 27" length, check available mounting space beforeordering.
SKU: 10101-2006467

BRIGHT #1157 HALOGEN BULB 50% brighter than normal #1157 bulbs! Replaces standard #1157 turn signal, parking and back-up bulbs Easy, affordable way to safer,more secure driving. High-power 30-watt/8-watt dual-filament halogen bulb.
Manufacturer: Design Tech
SKU: 10101-2003601

CONTACT TIPSFOR MIG WELDER Replacement parts for MIG Welder
Manufacturer: Clarke Power Products
SKU: 10101-2007565

ADJUSTABLE HELPER SPRINGS Add up to 1,500 lb. carrying capacity! Help end forward pitch, brake dive and dangerous sway Ideal for pickups carrying campers Prevent body roll, help restore sagging springs and stabilize vehicle for a smooth, safe ride. Note: Full-length helper springs are 2-1/4"W and include mounting hardware for installation on rear leaf springs up to 3"W.Sold in pairs. Note: Helper springs are designed to increase the level-load-carrying capacity of vehicle; never load vehicle beyond manufacturer's maximum GVW rating. (A) Springs are not adjustable.
Manufacturer: Hellwig Products
SKU: 10101-2005983

Bridgestone R265 Tire priced from $144.00 to $157.00.
Manufacturer: Bridgestone
SKU: Bridgestone R265 Tire
Category: Automotive Parts and Accessories Parts Tires

LOWER RADIATOR HOSENOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2000901

HYPER, HYPER EXTREME AND ULTRA HYPER REAR WINGS Priced low to give you the look you want without squeezing your wallet Designed to enhance your car's lines and contours Made of top-grade fiberglass—strong, durable and exceptionally lightweight Even our lowest-priced custom-fit wings have styleto spare! Third brake light included. Some surface prep required before painting. Easy bolt-on installation to trunk lid; some drilling required. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2001919

WINDOW WEATHER STRIP FOR ALL VEHICLES Replaces old windshield, sidewindow or rear window seals Available with or without built-in lock strip Perfect replacement for impossible-to-find seals in old cars or trucks, dune buggies, campers, etc. Custom-molded smog/ozone-resistant EPDM or SBR weather strip accepts 3/16" to 1/4" thick automotive glass. Easy to trim 16-ft. roll.
Manufacturer: Fairchild Industries
SKU: 10101-2008669

OIL PRESSURE GAUGE WITH 4-COLOR ILLUMINATION Includes 4 filters to let you illuminate the white face with the color of your choice—blue, green, red or normal white backlighting Solid brass Bourdontube or shielded OEM-type electric air-core meter movement for superior accuracy, performance and durability Easy-to-see red pointer Bright Back-Lit™ display Great-looking and ultra-lightweight titanium aluminum bezel Features impact-resistant lens, high-impact housing, 270° sweep dial face. Includes brackets for dash or pod installation, all necessary adapters, necessary wiring, tubing, senders and instructions. 0-100psi / 0-70kPa.
SKU: 10101-2008809

ENGINE SWAP MOTOR AND TRANSMISSION MOUNTS Ensure smoother, more positive performance while increasing horsepower Choose from a varietyof mounts—one's just right for you! For American vehicles
Manufacturer: D E A
SKU: 10101-2005504

1972-86 CJ AND 1987-95 YJ(SPICER #260X) CAP DIA = 1-1/16"
SKU: 52302 01
Category: Miscellaneous

LED DIGITAL QUARTZ CLOCK Only 3"W x 1-1/2"H (2" including pedestal mount) x 1-7/8"D For all vehicles Displays hours and minutes in illuminated red digital numerals. Display light goes out when ignition is turned off, but clock runs continuously. Flashing indicator shows clock is operational. Easy pushbutton reset. Accurate, reliable solid state. Mounts on dash (pedestal mount and double-sided tape included) or in dash (snap-in bracket included). Instructions included.For all 12-volt negative-ground systems. Minimum power draw.
Manufacturer: Custom Accessories
SKU: 10101-2003256

CHROME-PLATED 7" HEADLAMP FLEXIBLE POLISHED CONDUIT SET For all dune buggies, custom cars, hot rods, antique cars,trucks and tractors Add a sleek custom look to your vehicle and withstand rough treatment! Covers and dresses up the wires from headlights. Includes 3 polished stainless steel conduits (one horn and 2 headlights) and 2 chromed ferrules.
SKU: 10101-2003812

SUPERSTEP™ UNIVERSAL STEPS Affordable, stylish and sure-footed entry and exit Available forstandard 2-door extended-cab pickups (46"L) and 2-door SUVs (62"L) Molded step area has no-slip wraparound rubber treads. Install easily with rustproof steel brackets. Some drilling required. Gloss black molded ABS plastic. Hardware and instructions included. NOTE: will not fit '99-2000 Ford Super Duty F250, F350.
Manufacturer: Lund
SKU: 10101-2009148

Sold individually. Now, a new neoprene face fabric gives "TheSeats with Guts" wet-swimsuit, drenched-dog water protection! As in all Trailmax seats, the Aqua Sport's Atlas Frame, V-ROR Springs and Ultimate Foam team up to deliver smooth sailing on the road and an extra level of support on the beach or trail. (Wear your seatbelt at all times) Comes fully assembled. Includes mounting hardware.
SKU: 24277 115
Category: Miscellaneous

The last filter you will ever need to buy. The washable, reusable gauze and screen construction smoothes and straightensair entering the engine thereby increasing performance and mileage. Street legal in all states.
SKU: 77001 106
Category: Miscellaneous

DEFLECTOR SCREEN DX™ CONTOURED WINDSHIELD Sharp yet unobtrusive protection with special no-stress ball-and-socket mounting system Mounting system eliminates mounting holes in windshield Custom-styled to look perfect on your bike as it protects you from the wind Custom-molded of 3/16" thick high-visibility acrylic (tough and shatter resistant) with smooth chamfered edges. Windshield includes nonglare black hardware with a ball-and-socket mount. No need for mounting holes that can cause stress cracks at the mounting points. Socket mounting plates are chemically bonded to the windshield…the ball end of the mounting rods fits securely into this plate. Mounting rods telescope to allow height adjustments and to install to Quickset™ hardware. Patented Quickset™ system features a pivot handlebar mount that allows easy installation, adjustments and removal/re-installation of windshield in seconds. Also features Rake Adjust™ hardware (lets you adjust windshield to minimize wind drag). Instructions included. Meets or exceeds DOT specifications. The height listed is from the top of headlight cutout; width is measurement at widest point straight across the inside back of windshield. Approximately 15"W x 15-1/2"H(18-1/2"H overall).
Manufacturer: National Cycle Inc
SKU: 10101-2000665

CONVERTIBLE TOP PADS Custom fit kit is a must when replacing your convertible top Top pads help keep the new top trim and fitting properly Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may takea little longer to reach you.
Manufacturer: Kee Auto Top Manufacturing
SKU: 10101-2002691

DELUXE VINYL AND LEATHER REPAIR KIT Includes everything needed to make expert, invisible and permanent repairs 8 jars of liquid vinyl and iron included! Match grain and color...repair hardtops, convertible tops, car seats, door panels, dash padding. Enough material for approximately 40-50 ordinaryrepairs. Includes 8 automotive matched colors: White, Black, Dk. Brown, Red, Blue, Gold , Silver and Yellow. Includes heating iron, backing material, 2 oz. of cleaner, 2 oz. of clear dressing, 10 graining papers, color mixing guide, spatula and instructions.
SKU: 10101-2000719

BRAKE ADJUSTER PLUG WEATHERSTRIPPING OEM quality Easy to install Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reachyou.
Manufacturer: Metro Molded Parts
SKU: 10101-2000273

FAZE™ COMPETITIONEL™ 2" ELECTRICAL OIL PRESSURE GAUGE Electroluminescent white face that glows blue when you switch on the power Digital Morphing control(sold separately) lets you change the face color (from cool blue to neon green) and intensity for a radical look in any setting Made to the highest quality standards for unparalleled precision and accuracy 2" diameter. Range 0-100 psi. Sweep: 90°. Ultra-slim design for easy mounting almost anywhere—all needed fittings and adapters are included. Vibrationproof air-core meter. Brushed aluminum bezel—different color bezels sold separately. Easy-to-read black numerals.
SKU: 10101-2008820

LEATHER CYCLE HATS AND CAPS Made of black-dyed, soft, natural-grained leather with reinforced stitching Look great even afterlong, hard wear Choose from a variety of popular and classic styles
Manufacturer: Carr
SKU: 10101-2000070

IGNITION MODULE AND SENSOR TESTER Easy to use on GM, Ford, Chrysler, Honda, Nissan and Toyota vehicles with non-DIS system Tests 0 2 , MAP, MAF, knock and crankshaft sensors Easy-to-use detailed instruction manual Now you can test your ignition module and sensors! For use when your OBD code points you to an ignition module or sensor issue. Also tests continuity, diodes andwiring. Complete with back probe for in-circuit testing and all test leads. Operates on 9-volt battery (not included). Computer safe.
SKU: 10101-2008159

Overheated oil works poorly, and ultimately kills engines. Rock crawling and low speed driving where the engine is working hard can raise oil temperatures to dangerous levels. With an oil cooler, oil will stay at a normal operating temperature during hard duty, you save wear and tear on critical internal friction surfaces. Simple installation. Each kit includes all hoses, a sandwich plate, clear instructions and all mounting hardware. Essential for modified engines. Order by engine horsepower range.
SKU: 94000 01
Category: Miscellaneous

The Tigertop by Bestop is our most economical complete top kit, but you'd never know it to look at it. Each kit comes with doors, latches, bows and all the hardware needed for a complete installation. And what hardware: pre- assembled black powder coated bows and rods assure a hassle-free installation When folded all hardware and the top stay together. No loose rods will rattle or get lost. Snaps are concealed on the top for a smooth look and snap locations match factory-installed see additional info studs. Click-shut doors have flat paddle-type handles.Side and rear curtains roll up safari-style for maximum shade and ventilation. Adjustable foam-covered bows provide a skin-tight fit. **Because many CJ tops were dealer-installed snap locations may vary. New snap studs are included with the top.**
SKU: 21011 04
Category: Miscellaneous

"Add sporty lines and tough ding-protecting ridges to your bed rails with Bushwacker’s RidgeBack bed caps. The rugged Dura-Flex materialwon’t fade, crack or warp. Guaranteed for life. Easy 3M tape-on installation. "
Manufacturer: Bushwacker
SKU: 360
Category: Automotive Accessories. Bed Caps & Bed Rails

Bridgestone Potenza RE050 Tire priced from $173.00 to $288.00. The Potenza RE050 is an Ultra High Performance Summer tire designed to complement the performance of sports cars, sports coupes and sport sedans. While the Potenza RE050 is used as Original Equipment on the supercharged Mercedes-Benz S55 AMG sedan, a Potenza RE050 Scuderia version is used on the 12-cylinder Enzo Ferrari supercar, and a Run Flat version is used on the BMW Z4 sports cars and 5-Series sedans. The Potenza RE050 was developed to provide good traction along with responsive and predictable dry and wet road handling. It is not intended to be driven in the snow. On the outside, the Potenza RE050 features a high grip tread compound molded into a directional tread design. A continuous center rib, large tread blocks and stable shoulder elements provide responsive handling, high-speed stability and traction on dry roads, whilecircumferential and lateral tread grooves are aimed to pump water out from under the tire's footprint ...
Manufacturer: Bridgestone
SKU: Bridgestone Potenza RE050 Tire
Category: Automotive Parts and Accessories Parts Tires

AMERICAN FLAG MAGNETIC DECAL SET Waterproof, UV-protected hand-painted decals adhere securely without glue or adhesives! Feature .015" specialbipolar magnets for extra holding strength Hug the contours of your Jeep® or any steel surface—indoors or out Put 'em on and you're sure to get comments! Take 'em off to restore your Jeep®'s traditional look.
SKU: 10101-2006594

AVERY'S™ 3-PIECE COMPLETE ECONOMY 18OZCARPET MAT SET FOR VANS Set includes 2-piece front and "O", "U" or "T" shaped rear mat Long-wearing, heavyweight, cut-pile 18-oz. poly carpet Nibbed backing keeps mats in place and prevents curling Affordable floor protection! No-ravel cloth-bound edges. Tailored to fit—no cutting or trimming. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2007326

FLAME MIRRORSKINS Add style to your vehicle with raised, textured flame mirror skins! Installs in minutes with 3M™ adhesive—simply stick onto factory mirrors Custom-fit for trouble free installaion—no measuring or cutting! Sold in pairs. Includes instructions and cleaning pad. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: APG
SKU: 10101-2010159

STAINLESS STEEL BRAKE ROTOR SIMULATORS Multipattern lug bolt holes for easy fit on most cars Rusted brake drum? This is a great way to hide it! The look of custom disc brakes withoutthe high cost and hassles of a disc brake conversion! Made to fit any car, truck or SUV. APC Disc Brake Simulators also give the look of expensive brake systems while adding color and style to your ride. Simulators install between brake drum and alloy wheel in minutes. Won't upset tire balance. Rustproof heavy-duty stainless steel. Sold in pairs.
Manufacturer: APC
SKU: 10101-2003844

Full-length sun top provides coverage for rear passengers from sudden rain showers, and looks fantastic! Easy installation. Colors match all accessories. Works with Wind Breaker, and Steel Horse Tonneau Covers. Available in gray, black or spice. Since all Island Toppers require a windshield channel make sure your Jeep has one before ordering. Most Jeeps with soft tops already have a windshield channel and will not require a new one. **All '97-'00 Wranglers require awindshield retaining channel #11120.00**Jeeps with a hardtop only will need a windshield retaining channel, #11020.01
SKU: 11026 15
Category: Miscellaneous

Greasable shackle & leaf spring bushings provide the ultimate in durability for vehicles with extremeside-loading in off-road conditions. Stock bushings made of rubber can be easily torn and tend to crack after lots of hard use. These polyurethane bushings replace stock rubber units and inside the urethane are sleeves with grease fittings. Get truer suspension articulation & eliminate frequent replacement of wimpy rubber bushings. For use with your original equipment shackles and leaf springs. Choose from either Red or Black. Designed for Stock Springs
SKU: 16044 304
Category: Miscellaneous

LOWER AND CENTER FILLER PANEL For pickups and SUVs Restores original look and integrity Easy, bolt-on installation using original mounting hardware Shaped and contoured to replace original perfectly! Eliminates rusted or damaged panel between grille and bumper. Die-formed steel with all correct body lines, light holes, cutouts, mounting holes, etc. Primer-painted to fight rust.Some surface prep required before painting. Use with existing grille and turn signals.
SKU: 10101-2000522

Hardplastic light covers fit 6" Daylighters. Sold individually.
SKU: 97010 22
Category: Miscellaneous

REPLACEMENT FACE SHIELD Replacement visor (including mounting screws) and side pods (including mounting screws) sold separately Available in clear or smoke-tint For use on 4-in-1 Vented Full-face Painted Helmet Clear, optical-quality molded polycarbonate shield has left-side finger tab for effortless positioning. Multi-position ratchet mechanism is concealed by either the sides ofthe visor or by the included side pods (when visor is not used).
SKU: 10101-2000135