REPLACEMENT VENT WINDOW WEATHERSTRIP @ Automotive online store

REPLACEMENT VENT WINDOW WEATHERSTRIPBlack top-quality automotive-grade rubber won't crack or deteriorate Replaces original-equipment weatherstrip that wraps around vent windows on front doors Stops water and air leaks, whistles and rattles caused by damaged or missing originals. Keeps interior clean and dry. Includes vent seals plus 2 division post seals for driver's and passenger's sides.
Manufacturer: Fairchild Industries
SKU: 10101-2008589

COMPLETE LOWERING KITS For Chevy/GMC, Dodge and Ford trucks and SUVs Everything you need in one handy package to lower your truck the right way Only the finest quality components—specifically designed for a great fit and long life Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Coil Spring Kit Contents: A=Front coils, rear hanger/shackle kit, front and rear shocks B=Front coils, rear hanger/shackle kit, front and rearshocks, driveline alignment kit C=Front coils, rear blocks, U-bolts, front and rear shocks D=Front and rear coil springs, shocks and rear-limiting straps E=Front coil springs, rear air back bracket, front and rear shocks, rear-limiting straps
Manufacturer: Bell Tech
SKU: 10101-2005843

The finishing touch for your vehicle. Smooth fitting tailored Spare Tire Covers are available in many factory-matched colors. Looks great with a matched Bikini Top too! Orderby tire diameter for the best custom fit. 5 sizes and most factory match colors to choose from.
SKU: 91073 15
Category: Miscellaneous

NITROUSAFE NITROUS OXIDE SAFETY SYSTEMS Systems prevent "lean burn" conditions due to fuel solenoid failure If you use nitrous, then you need NitrouSafe to protect your expensive engine! The first true safety device for nitrousoxide systems! Here's how it works…NitrouSafe System "looks" for fuel pressure to immediately follow fuel solenoid trigger. If pressure is not detected within 0.25 seconds, the fuel indicator will completely disable the nitrous solenoid, preventing nitrous oxide from entering the engine area. The nitrous oxide solenoid will remain completely locked out until the system is reset. One-year warranty.
SKU: 10101-2005731

POWER WRENCH KIT Twice the torque of a standard lug wrench! Telescoping handle extends to 22" for maximum leverage and maximum torque Removes the tightest lug nuts in the tightest spots effortlessly! Stock wrench can't loosen stubborn lug nuts? Gorilla power can! This wrench and the thin-wall sockets supply the power you need and fit where conventionalwrenches can't. Perfect for aftermarket wheels with minimum clearance between wheel and lug nut. Wrench extends to 22", closes to 14" for storage. Sockets work on both deep-dish and standard wheels. Hardened steel wrench with chrome-vanadium steel sockets. Kit includes 1/2" drive wrench; two 1/2" drive sockets (3/4" and 13/16"); 3" extension; compartmented plastic carrying case.
Manufacturer: Gorilla Automotive
SKU: 10101-2007945

Highly polished chrome replacementfor standard '97-'00 Wrangler Gas filler housing. Easy installation, because it uses factory mounting holes for easy assembly
SKU: 13100 01
Category: Miscellaneous

Cool rock bumper style with addedconvenience. Use to from t receiver for all sorts of chores. Tapered ends make these 50" and 57" rock bumpers perfect for rock crawling. Models for '76-'00 CJs & Wranglers (except '91-'93 Renegades). These feature Rubicon Black Finish.
SKU: 12006 83
Category: Miscellaneous

AMERICAN TEARDROP™ 35-PIECE TOOL KIT Tools and other must-haves in a pouch designed to fit into Softail® teardrop tool boxes! 100% USA made, using top-gradetools Kit includes: 5 wrenches (3/8" x 7/16", 1/2" x 9/16", 5/8" x 3/4" open end, 10mm combination, 8" adjustable); 8 L-shaped hex keys; 6 L-shaped Torx® keys; 6-in-1 reversible screwdriver (contains 2 each slotted and Phillips tips plus nut driver with 6mm and 8mm [1/4" and 5/16"] sizes); 2 spark plug sockets (5/8", 13/16"); gap gauge; locking pliers; electrical tape; WD-40®; Loctite® 242; 5 cable ties; 32" long mechanic's wire; shop towel; zippered 10" x 5-1/2" Cordura® carry pouch.
Manufacturer: Cruz Tools Inc
SKU: 10101-2007924

EZ-PC 500 PC LINK Makes EZ-Scan even better! Windows-based C-ROM updates/upgrades scanner in minutes, not months Lets you archive scanned engine activity information on your PC for easy retrieval when needed Also lets you use PC to create data graphs and charts for a more complete understanding of engine activity/problems. You can print reports andexport captured data in spreadsheet format. With serial interface cable and informational guide.
Manufacturer: Auto X-Ray
SKU: 10101-2008094

DOOR PANEL REMOVER For Ford and GM vehicles. Removes panels easily without damage. Great in limited-access areas.
Manufacturer: Cal Van Tools
SKU: 10101-2007936

ADJUSTABLE OIL FILTER PLIERS Extra-long 7-3/4" handles to get into tight spots and provide torque needed to remove stubbornfilters Slim, drop-forged, heat-treated steel with plastic-coated handles for a comfortable grip Great for tractors and other vehicles Fits filters with 2-1/4" to 4-5/8" (60mm to 115mm) diameters. 12"L overall.
SKU: 10101-2007830

UNIVERSAL STEERING DUAL-CARBURETOR LINKAGE KIT One new and improved kit canbe used on all carburetors…Weber ICT, IDF, IDA, Kadron and more! Forged right- and left-hand-thread rod ends simplify adjustments Precise throttle-cable-arm alignment ensures smooth operation Kit includes 3/8" billet 6061-T6 aluminum linkage rods, billet 6061-T6 support stand and fan shroud arm brace.
Manufacturer: Scat
SKU: 10101-2005622

Adding this 16-gauge steel console insert to the factory console in a '88-'96 Cherokee provides additional storage space and added security. Features include a removable storage tray and a drink holder that holds 2beverages. Some drilling required. Available in black only.
SKU: 74125 801
Category: Miscellaneous

SOUND-ACTIVATED NEON POWER BOLT TUBE A dazzling bolt of electrical energy "dances" to the sound of your music Includes crackle tube with built-in "lighter dancer" transformer, 3-way switch (on/off/dance), cord andcigarette lighter adapter.
Manufacturer: Lite Glow
SKU: 10101-2003692

HEDMANN HEDDERS® Improve engine efficiency allowing an increase performance by up to 20% Remove exhaust gasses faster and more efficiently Designed to bolt to engine head easily without incurring any power-robbing dents or dings Originally developed for racing and designed to provide maximum increase in power for passing, hauling, towing,etc. Power improves gas economy…relieves engine strain. Hedders have smooth mandrel bends and are flame tested for leaks. Step-by-step detailed instructions provided; however, if you experience installation difficulties call (565) 921-0404 and a knowledgeable Hedman sales engineer will assist you. Quality gaskets and mounting hardware included. Important: Refer to notes below when ordering. Manufacturer limited lifetime warranty. Check local emission laws before ordering. NOTE: Not legal for sale or use on California pollution-controlled motor vehicles. This product is intended for off-road or racing use only and is not intended or applicable for highway use. Performance-geared (Painted) Hedders®. Replace inefficient heavy cast iron factory manifolds. Allow engine to breathe efficiently and produce more horsepower resulting in cooler engine temps and a better ride. Painted (black coating). NOTES: Without smog injection or injection heads. Modification to stock exhaust required to retain catalytic converter. Not legal for sale or use in California on pollution-controlled motor vehicles. Pair that collects 3 cylinders each. Dual outlet. Single hedder that collects all 6 cylinders into one collector. Dog leg port only. Fender wall exhaust exit. Under chassis exit. Includes parts necessary to retain emission devices—50-state legal. Replaces Tubular Exhaust Manifold System (TEMS). 16-gauge tubing. Must use Trans-Dapt Engine Swap Kit (sold separately). Shorty hedder (maximum ground clearance) under chassis exhaust exit.
SKU: 10101-2006362

1-PC. FIBERGLASS FRONT ENDS FOR CARS Rugged to absorb drag strip stress and strain! Front ends weigh less than stock and improve strip or street performance Lightweight for increased performance Designed to align perfectly with stock body. Headlight and grille areas may be cut out and made functional if desired for street use ( A indicates front end is already cut out and requires use of original grilles or screeningto fill in). Original chrome accessories may also be used. Include hinge kit with mounting arms and brackets to allow entire front end to be tilted forward for easy access to engine (use of hinge kit prohibits use of front bumper). Gel-coat finished, needs sanding and priming before painting. Require hood hold-down pin set (not included). Not mailable. Shipped separately from factory. NOTE: SKU numbers ending in FE are factory shipped by freight truck.
SKU: 10101-2001975

PLASTIC-INSULATED PRIMARY WIRE Choice of 5 gauges forevery wiring purpose Available in 25- to 500-ft. spools Colorful plastic insulation permits quick identification. Copper strand wire for reliable current conduction.
Manufacturer: East Penn
SKU: 10101-2007598

CARGO LINERS The finestliner available Great for protecting rear cargo area from wear and tear Mats are ideal when hauling messy garden supplies, construction gear, sports equipment, etc. 3"H outside lip contains any spill. Skid-resistant surface prevents cargo from sliding around. Tough, durable and able to withstand temperature extremes. Liner cleans easily with a damp cloth, sponge or vacuum.
SKU: 10101-2007472

HEDMANN HEDDERS® Improve engine efficiency allowing an increase performance by up to 20% Remove exhaust gasses faster and more efficiently Designed to bolt to engine head easily without incurring any power-robbing dents or dings Originally developed for racing and designed to provide maximum increase in power for passing, hauling, towing, etc. Power improves gas economy…relieves engine strain. Hedders have smooth mandrel bends and are flame tested for leaks. Step-by-step detailed instructions provided; however, if you experience installation difficulties call (565) 921-0404 and a knowledgeable Hedman sales engineer will assist you. Quality gaskets and mounting hardware included. Important: Refer to notes below when ordering. Manufacturer limited lifetime warranty. Check local emission laws before ordering. NOTE: Not legal for sale or use on California pollution-controlled motor vehicles. This product is intended for off-road or racing use only and is not intended or applicable for highway use. Performance-geared (Painted) Hedders®. Replace inefficient heavy cast iron factory manifolds. Allow engine to breathe efficiently and produce more horsepower resulting in cooler engine temps and a better ride. Painted (black coating). NOTES:Without smog injection or injection heads. Modification to stock exhaust required to retain catalytic converter. Not legal for sale or use in California on pollution-controlled motor vehicles. Pair that collects 3 cylinders each. Dual outlet. Single hedder that collects all 6 cylinders into one collector. Dog leg port only. Fender wall exhaust exit. Under chassis exit. Includes parts necessary to retain emission devices—50-state legal. Replaces Tubular Exhaust Manifold System (TEMS). 16-gauge tubing. Must use Trans-Dapt Engine Swap Kit (sold separately). Shorty hedder (maximum ground clearance) under chassis exhaust exit.
SKU: 10101-2010529

SOUND-ACTIVATED MULTICOLORED UNDER-CAR LIGHT KIT Each tube includes a mix of 2 or 3 colors that change in response to exterior sounds—there's nothing quite like the effect achieved! A whole new dimension in under-car lighting! Tubes are made of water-resistant, high-impact acrylic Kit includes two 4-ft. tubes, two 3-ft. tubes, self-adjusting Pro Series transformer (draws less power than conventional units), on/off switch, mounting clamps andinsulators.
Manufacturer: Lite Glow
SKU: 10101-2003670

Perfect for the oversize tires that serious off-roader's require. The Warn tire carrier is built to withstand the abuse hard-core trails can deliver. Sold with a Warn Rock Crawler Bumper, the new Warn Tire Carrier is designed to carry heavier tires (up to 36"). It pivots on a beefy 1-1/2" solid steel shaft pin, which comes up from within the bumper into the frame of the Tire Carrier. Structural welds (t-joints vs. corner welds) hold up in the long run. Period. Polyurethane pad reduces rattling. Includes CB antenna mount and frame reinforcing brackets.

RETRACTABLE LAP AND SHOULDER SEAT BELT WITH 12" SLEEVED BUCKLE Keeps you and your passengers safe on and off the road Perfect replacement for worn or damaged original Meets Federal Vehicle Safety Standards Locks automatically in an accidentand provides upper body support. Stores neatly and prevents damage when not in use. Hardware included.
Manufacturer: Beams
SKU: 10101-2006835

TRI-FOLD LOADING RAMPS End hassles and back strain when loading and unloading pickup or trailer Choose 70"L or 84"L steel or aluminum Easy to use, easy to haul and easy to store! 4 strong fingers (covered to help prevent scratching) hold ramp on tailgate or trailer. 2 retaining chains (included) helpprevent separation. Cannot be shipped express.
Manufacturer: Travelrite
SKU: 10101-2004708

CHROMED OIL DIPSTICK KIT Show-quality automotive-type dipstick lets you check oil level quickly and easily, evenif side frame covers have been installed No need to use hard-to-see-through viewport For '75-83 GL1000, GL1100, Aspencade® and Interstate™ models Includes dipstick, tube, mounting bracket, compression fitting, washer and instructions.
SKU: 10101-2005450

HOW TO RESTORE YOUR PICKUP MANUAL Covers everything from cleaning to welding techniques! Detailed manual for restoring and maintaining your pickup for the best performance! Contains an entire chapter devoted to the benefits of rebuilding versus restoring and which is the right approach for you Featured topics include cleaning; sandblasting; derusting; replating; engine, carburetor, generator and starter rebuilds; front end, steering and brake overhauls; body repair; box restoration; painting and interior rejuvenation; wiring installation; gas weldingtechniques and even the history of these pickups. Over 220 photo-packed pages.
Manufacturer: Motorbooks
SKU: 10101-2006823

FACTORY-STYLE AND CUSTOM-STYLE REAR WINGS Beautifully made, quality constructed and easily paintable to match your car's color schemeA great way to dress up an older car or add extra, take-notice styling for a newer model Some drilling may be required, depending on application. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: JSP
SKU: 10101-2001865

HEAVY-DUTY THROTTLE CABLE KIT Unique cable features a different throttle-pedal connector on each end For all Beetles, Dune Buggies and Sand Rails Multi-strand cable is thicker and stronger to reduce breakage problems common with single strand cables on Beetles, Dune Buggies and Sand Rails. Simply cut off the connector not needed for your vehicle and trim cable to desired length. Kit includes cable adapterfor hookup to carburetor. 0.055" diam. cable x 14-ft. long.
Manufacturer: Dee Engineering
SKU: 10101-2005627

POSITIVE-LOCK TIE-DOWNS WITH BUILT-IN SOFT HOOKS Heavy-duty 1"W nylon webbing is cross-stitched with heavy nylon thread Tough (4,000-lb. tensile strength), durable and weather resistant Hook never touches cycle…let's you secure gear without damaging finish Two 3/8" steel hooks (one vinyl-coated).Special design lets you wrap webbing around cycle and then slip vinyl-coated hook into loop end. Positive-locking cam-design buckle grips belt securely and prevents slippage. Steel buckle with 5-ft. long belt.
SKU: 10101-2004416

"Go to the extreme with Gibson Exhaust’s Dual Extreme performance exhaust system. The aggressive dual, split pipes and powerful growl let the competition knowyou mean business. "
Manufacturer: Gibson
SKU: 286
Category: Automotive Accessories. Performance Products

CHROMED ACORN-STYLE ENGINE BOLT COVERSAdd show-quality and dress-up styling to engine Choose from 7 different sizes Chrome-plated die-cast zinc. Hex-shaped covers fit easily and securely over plain hex-head bolts. Won't loosen during normal vibration. Set of 10.
Manufacturer: Bob's Antique
SKU: 10101-2005391

EXHAUST ELBOW For Volkswagens Easy to install—no alterations needed Heavy-gauge steel withstands extreme vibration and road shock Custom made and engineered to exact factory standards. Special louver design breaks up noisy sound waves, resulting in a super-silent muffler with lowest back pressure. Inletand outlet pipes are included as part of muffler, ensuring permanent rigid suspension and high-quality long-lasting performance. Location of the heat riser tube may be different on replacement muffler; this will not affect the installation or operation of the muffler and heat riser system.
Manufacturer: Dansk Autopart
SKU: 10101-2006244

ACCELERATOR PEDAL WEATHERSTRIPPING An economical wayto repair damaging rain and annoying wind leaks OEM quality Easy to install Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Metro Molded Parts
SKU: 10101-2003026

CHROMED BREATHER FILTER AND RELOCATION KIT Adds custom styling and relocatescrankcase breather hose to best location for maximum filtered venting Replacement filter with chromed cap sold separately Eliminates the unsightly hose left dangling behind the engine or transmission when hose has been disconnected or when a custom air cleaner without breather fittings is being used. Also reduces the breather noise caused when the vent hose is not connected to original air box. Approx. 2" diam. paper and wire mesh filter has chrome-plated molded-on plastic cap. Teardrop-shaped mounting plate is made of chrome-plated die-cast metal. Clamp attaches filter to both the mounting plate and venting hose. Plate has pre-drilled hole for easy mounting using existing bolt.
SKU: 10101-2005468

STYLEYES HEADLIGHT GUARDS™ Exclusive custom-fit "eyelet" design won't interfere with headlight beams for a show-stopping appearance anytime, anywhere! Custom-molded Impact 2000 composite withstands temperature extremes andminor impacts Easy snap-on installation—no drilling required Stylish protection for expensive headlamps. Easy to remove for cleanups. Set of 2 with hardware and instructions. Limited lifetime warranty. Sold in pairs.
Manufacturer: EGR
SKU: 10101-2002058

DUAL HEADER EXHAUST SYSTEMS - FOR VOLKSWAGEN Get more horsepower at the wheels For dune buggies and kit cars with Volkswagenengines Note: Not legal for sale or use on California pollution-controlled motor vehicles
Manufacturer: Thunderbird
SKU: 10101-2006334

TRIPLE PLATINUM SPARK PLUG Guaranteed by Splitfire® to outperform any plug you've ever used or you get yourmoney back! Splitfire® Performance spark plug (non-platinum) sold separately The last spark plug you'll ever have to buy for your bike! 3 separate platinum firing points (more than any other plug!) virtually eliminate electrode wear. Platinum-tipped fine wire electrode requires less voltage to fire at any RPM. Patented V-shaped electrode exposes more spark to the air/fuel mixture for a larger, much more complete burn. Splitfire® Performance spark plug. Patented V-shaped split electrode unleashes a "firestorm" into chamber to ensure complete combustion.
Manufacturer: Splitfire
SKU: 10101-2005157

KEVLAR® BELTED "V" RATED TIRES Withstand speeds up to 149 mph Aggressivelydesigned for long tread wear, stability, top performance…and strength! Computer-designed and specially formulated matching front and rear tires 4-ply belt construction with 2 inner nylon cord belts and 2 outer Kevlar® belts for maximum strength. Special casing design minimizes expansion at higher speeds and promotes smooth corner-to-corner transitions for easier handling. Created for full-dress touring motorcycles but can be used on any street or sport cycle. Formulated of special compounds (using various top grades of rubber) for durability. Computer-designed directional treads for sure traction on wet and dry surfaces. Meet or exceed DOT highway specifications. Tubeless design, but may be used on tube-type rims with an inner tube and rim strip (sold separately). How To Order: Before ordering, check tire size found on current tire sidewall or as listed in owner's manual, then order the same size tire. If ordering a wider tire, be sure to allow sufficient clearance and check the manufacturer's recommended rim widths (RRW) and load ratings (LR) to help determine which tire is best. (RRW) Given in inches. (LR) Given in pounds for each tire (based on a tire inflated to the psi indicated on sidewall); add front and rear load ratings to determine TOTAL for cycle. (SIS) Standard inch sizes Tire Width x Rim Diameter. (MS) Metric sizes Tire Width in millimeters/Sidewall Height as a percent of tire width x Rim Diameter in inches.
Manufacturer: Maxxis
SKU: 10101-2003924

Here's a great way to lift a Cherokee to fit 30" and most 31" tall tires without spending lots of money in the process. It's a simple yet well engineered method of suspension lift. The Kit includes1 3/4" coil spring spacers for the front and 1" leaf spring lift shackles for the rear. Choose either the kit with standar or greasable rear shackles. Allows for greater tire clearance without compromising the factory ride quality.
SKU: 76057 801
Category: Miscellaneous

AMGAero II Monoblock Silver w/Machined Lip Wheels priced from $239.00 to $529.00. AMG Aero II Monoblock Silver w/Machined Lip Wheels.
Manufacturer: AMG
SKU: AMG Aero II Monoblock Silver w/Machined Lip Wheels
Category: Automotive Parts and Accessories Parts Wheels

The Brief Sun Top for Jeep vehicles is the stylish way to cover the area above the driver and passenger from sudden rain showers and it looks fantastic! Simple installation. Colors match all accessories. Works with Wind Breaker and tonneau covers. Available in gray, black or spice. Since all Brief Sun Tops require a windshield channel make sure your Jeep has one before ordering. Most Jeeps with soft tops already have a windshield channel and will not require a new one. **All '97-'00 Wranglers require a windshield retaining channel #11120.00**Jeeps with a hardtop only will need a windshield retaining channel, #11020.01

Special for a limited time only from $28.95 now for only $18.95
SKU: 21023 04
Category: Miscellaneous

AUTOMATIC AIR-POWERED GREASE GUN Fully automatic and self priming—cycles continuously when trigger is pulled Pistol-grip control—a pull of the trigger dispenses0.02 oz. of grease…hold the trigger and grease flows continuously (stops when you let go) Easier to use and less tiring than heavy manual grease guns Delivers up to 6000 psi pressure. Gun features plated steel barrel with flip-over follower. Air operating range: 40-150 psi. Grease cartridge not included.
Manufacturer: Lincoln
SKU: 10101-2007726

6- AND 12-VOLT HORNS For all'55-66 and '67-95 Volkswagens Fits just like original horn, but is smaller. Sealed for water resistance, longer life. 4-1/2"-diam. sturdy metal horn is complete with mounting bracket and push-on terminals. Choose 12V or 6V.
SKU: 10101-2009008

"The Car Breathalyzer - Don’t take the chance! Tiny 3.5"" Breathalyzer measuresthe level of alcohol in a person's breath with advanced technology, displaying precise digital ""Blood Alcohol Content"". "
Manufacturer: PNI Corporation
SKU: 12
Category: "Accessories, Safety & Security"

PUSH-ON TRIM WEATHER STRIP Fits perfectly and securely—push-on over metal flange—no adhesives or clips required Samples available For doors, trunks and windows Upgrades interior. Locks out rain, drafts, cold and dirt…helps stop windowand trunk rattles. Black weather strip consists of a sponge rubber bulb attached to leather-grained vinyl or solid rubber trim. Trim channel measures approx. 1/2"W x 9/16"H and is reinforced with flexible steel core to grip 1/16" to 5/32" flanges easily and securely. Easy-to-trim 25-ft. rolls. To receive a weather strip sample, call (877) 927-7427.
Manufacturer: StanPro
SKU: 10101-2008597

CUSTOM-FIT WEATHERSTRIPPING AND PARTS Help restore original look and eliminate leaks, rattles and wind whistles Custom formed andmolded to match originals perfectly Replace old and deteriorated weatherstripping and parts easily. Ozone-resistant, high-quality EPDM black rubber. (A) Smooth California look—no trim groove. (B) Rubber part only.
Manufacturer: West Coast Metric
SKU: 10101-2008550

HOODACCESSORIES Universal applications Hardware included Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2006545

COMPLETE WEATHERSTRIP KIT 6 Replaces torn, cracked, missing originals—eliminates water leaks, whistles, rattles Like originals to ensure a quality restoration! Quality made in the USA by leadersin the field. Custom-extruded and molded automotive-grade rubber with smooth finish is sun and ozone resistant. Kit includes door weatherstrips, roof-rail weatherstrips, hood-to-cowl seal and seal clips, trunk weatherstrips, window belt weatherstrips and bumpers for hood, doors and trunk.
Manufacturer: Soff Seal
SKU: 10101-2008539

REMOTE CONTROL KIT FOR SUPER-WHITE AND AUXILIARY LIGHTS Switch fits right on your key chain Simplifies light installation—no drilling and wiring through firewall Illuminates lights from up to 250 ft. away! Kit includes switch,control box, relay, preassembled wiring harness, connectors and instructions.
Manufacturer: Eagle Eye
SKU: 10101-2001337

TONNEAU COVER Aerodynamically designed to blend perfectly withyour car's lines and contours Guaranteed to fit right—Ground Designs 2000® sets the standard for the body styling industry High-gloss black finish looks great out of the box or can be painted to match your finish Transform your Ford Mustang into something truly sensational! Made of tough ABS plastic. Bolt-on installation uses factory fittings. Includes chrome-plated Ground Designs 2000® emblems, installation bolt kit and instructions. Manufacturer's no-defect warranty. Shipped separately from factory. NOTE: SKU numbers ending in FE are factory shipped by truck freight.
SKU: 10101-2010504

UNIVERSAL REPAIR STAND Lever-like action lifts and lowers bike smoothly Strong, safeand lightweight Height and width adjust to fit your individual cycle Heavy-walled 1" round steel tubing holds bike firmly. Easy to use. Height adjusts from 13-3/4" to 17". Width adjusts from 8-3/4" to 12-1/2". Removable tailpiece is 28"L. Note: Check height and width measurements needed for your cycle before ordering.
Manufacturer: Pertronix
SKU: 10101-2007584

DOUBLE-WING RACING JTCC-STYLE ADJUSTABLE ALUMINUM WING SPOILER Lightweight, high-quality aluminum wing provides a brand new look for the rear of any car! Fully adjustable to create just the right downforce for better traction, easier handling and more stability A unique combination of super styling and function—rear downforce improves car's performance and means your engine doesn't have to work as hardYou select your favorite wing height. Manually adjustable rod kit included. Bolt-on installation. Some drilling required. Black side plates.
SKU: 10101-2001912

12-VOLT OIL CHANGE PUMP Remove oil without getting under vehicle Pumps out oil and sludge throughdipstick tube For cars, trucks, boats, lawn mowers, tractors and heavy equipment No need to open engine crankcase drain plug. Lightweight enough for one-hand operation. Instructions included. For all 12-volt systems.
SKU: 10101-2009567

CUSTOM-FIT CENTER CONSOLES For Volkswagen vehicles Organize interior and look great! Padded pressboard/wood console Feature a shift boot, 5-3/8" x 4-3/8" x2-1/4"D storage compartment, 2-3/4" diameter drink holder and storage compartment with coin holder.
Manufacturer: T M I
SKU: 10101-2007483

TRANSMISSION TREATMENT Great for automatic and manuals transmissions on cars and lighttrucks Uses patented AMFT technology to treat and lubricate the high-friction internal metal surfaces of your engine/transmission Proven patented formula bonds to the metal surfaces to minimize friction and to lower operating temperatures Simple maintenance resulting in a smoother running and longer lasting engine and transmission. Reduces damaging friction and heat to ensure smoother, easier shifts. Compatible with most transmission fluids and gear oils. 8-oz. container.
Manufacturer: Prolong Super Lubricant
SKU: 10101-2000803

AUTOMATIC LOW-BEAM HEADLIGHT CONTROL Automatically turns your original low-beam headlights on/off with ignition! Adds safety—makes your vehicle more visible during daylight hours Similar to systems offered as original equipment on many vehicles today Tests have shown that driving with your low beams on during the day can reduce 2-vehicle collisions by up to 30%! Automatic shut-off means no dead or drained batteries if you forget to turn headlights off. In some areas (including Canada) driving with daylight low beams and all lights is required by law. Installs easily—instructions included. Won’taffect manual operation of headlights. For 12-volt negative-ground systems. Choose high- or low-voltage model. High-voltage is perfect if you normally drive shorter distances. Low beams stay on at full power. Low-voltage is best for long distance drivers. Low beams stay on at 24% less voltage to extend headlamp life.
Manufacturer: Hamsar
SKU: 10101-2003355

SERIES 1 CARBON-FIBER EVO WINGS Fully adjustable wing with street and world rally car inspired styling and function! Adjust to create the perfect downforce position for your driving needs Stainless steel end caps Manufactured with dry carbon process utilizing the latest in F1 technology. This process combines resin pre-impregnated carbon-fiber and CNC machined aluminum tooling. Approximately 5 lbs. Shipped separately from factory. NOTE: SKU numbersending in F are factory shipped and may take a little longer to reach you.
Manufacturer: 3dCarbon
SKU: 10101-2010191

The New Ramsey Patriot Series combines the proven design of their Platinum and ProPlus series winches and takes it to the next level. The new Patriot Series consists of four models: 6000, 8000, 9500 and 15,000 lbs. The Patriot Series is a highperformance winch for the off-roader that demands the best
SKU: 92142 003
Category: Miscellaneous

STAGE 1 HIGH-PERFORMANCE CLUTCH KIT Premium organic friction materials are resistant to slippage and burst The preferred clutch for street and light HP track Increased clamp loads provide necessary capacity to handle modified engines From the acknowledged leading manufacturer of sport, performance and racing clutches in Japan! All Exedy clutches are built from the ground up as racing clutches—not rebuilt from modified stock clutches. Features drivability like a stock clutch. Clutch disc has a high-capacity spring center damper to reduce drivetrain shock/impact. Pressure plate castings are made of ductile (nodular) iron—not gray cast iron that can burst or explode. Pull-type clutch has a high torque capacity, light pedal effort and great release performance. And, unlike the competition, it has a patented snap-in/snap-out release system to simplify installation without sacrificing any of the advantages of a pull-type system. Kit includes a single organic disc and spring center damper disc assembly. Custom-fit racing flywheel sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longerto reach you.
Manufacturer: EXEDY
SKU: 10101-2009559

POLYETHYLENE TARP MATERIAL TRAILERABLE BOAT COVER Superior fit—stretch cord sewn in entire bottom hem ensures a tight, "custom" fit Full-cut design allows room for ladders, running lights, etc. Stored, moored, towed—protect your high-priced investment against the elements with a great, low-priced cover! Whatever your needs or budget, we've got your boat covered! Better than conventional tarps and surprisingly affordable! Strong, heavy-duty fabric is waterproof—all seams are overlapped and double-needle stitched with tough no-rot thread. Exclusive trailering system keeps your cover in placeduring towing without grommets to pull out or scratch. Cover features built-in adjustable straps with D-rings. Included tie-down cords attach to rings. Gray color. Includes storage bag. Manufacturer's limited one-year warranty. SIZES TO FIT YOUR BOAT: A: Fits "V" hull fishing boats 14-feet to 16-feet long. B: Fits "V" hull and tri-hull runabouts (outboards and I/O) and aluminum bass boats 14-feet to 16-feet long. C: Fits fish, ski and pro-style bass boats 16-feet to 18.5-feet long. D: Fits "V" hull runabouts (outboards and I/O) 17-feet to 19-feet long. E: Fits "V" hull runabouts (outboards and I/O) 20-feet to 22-feet long.
Manufacturer: Classic Auto Accessory
SKU: 10101-2008528

BAJA BUG REAR SEAT/CARGO AREA CARPET 5-piece setcovers back seat and cargo area, including wheel wells when rear seat has been removed The finishing touch to your Baja interior Nylon loop weave is durable and easy to clean
Manufacturer: EMPI
SKU: 10101-2007241

PERFORMANCE THROTTLE BODY SPACER Advanced "deep-screw" engineering ensures a better fuel/air mix Increases horsepower and torque…improves fuel economy Installs easily with hand tools—no drilling required!
Manufacturer: Motorvation
SKU: 10101-2005568

The perfect companion to a Bikini top. Covered with soft top material in factory matched colors by Bestop. Each door has a sturdy inside latch and a welded steel frame. Smooth outside look with new low-profile hinges. Super quick installation, no drilling required. These click shut with flush exterior paddle handles. Models for all CJs, Scramblers and '87-00 Wranglers. **'81-'86 CJ7 with steel doors (paddle handle) use YJ soft doors.**
SKU: 21041 07
Category: Miscellaneous

These custom-cut four piece mat sets are manufactured from durable high-grade automotive carpeting. Each mat is bonded to a rugged rubber backing to insure that your mats stay put. An affordable way to prevent wear and tear on your carpets and it adds extra sound deadening as well.

Special for a limited time only, from $39.95 now for only $29.95
SKU: 14053 01
Category: Miscellaneous

REPLACEMENT B&M FILTER OEM-quality filtershould be changed regularly Removes foreign particles to keep transmission fluid clean For use with B&M cast aluminum automatic transmission pans
Manufacturer: B & M
SKU: 10101-2002823

Protectnew seats and restore old ones with Genuine Bestop seat covers. Custom designed with patterns so accurate that your seats will appear to be re-upholstered. Produced from knit-back automotive grade vinyl with deep embossed center panels. Easy to-it-yourself design means no special tools or skills are needed. These durable covers can be installed without removing the seats. Tension cords snug the cover smoothly on the seat like a professional installation. No experience is necessary!
SKU: 24260 04
Category: Miscellaneous