SUPERTOP W/DOORS CJ7 ALMOND @ Automotive online store

Supertop! The name says it all. And it's loaded with state-of-the-art features. All Supertops come equipped with a patented track installation system. This eliminates snaps and give a continuous clean-looking weather tight seal. Supertops fold down on your Jeep without removal from the top frame and all of the hardware stays on the Jeep. No loose parts to get lost. Premium features include: Click-Shut two piece doors with flat paddle type handles, removable (and replaceable) windows, black powder coated aluminum and steel hardware.Each Supertop kit is complete with every piece of hardware that you need. Most hardware is factory pre-assembled to cut down on installation time. Nothing to extra to buy. Also has EZ Open tailgate hardware (for Wrangler and CJ7). VHS installation video is included with Supertops for use on vehicles up to 1995. Supertops are available for all Jeeps from 1955 to 2000 in a great selection of factory matched colors. (See additional pictures for additional information)
SKU: 11001 14
Category: Miscellaneous

Jeeps with a hardtop only willneed a windshield retaining channel, #11020.01
SKU: 11026 215
Category: Miscellaneous

WATER-RESISTANT CAR COVER Durable water-resistant 3-layerfabric with welded seams Ideal for extremely wet or snowy climates Special air vent system keeps water out yet allows cover to breathe Excellent protection against rain, snow, tree sap, leaves, bird droppings, the elements and many other dangers to your cars finish. UV stable—protects against the harmful effects of the sun's rays that fade carpeting and upholstery. Resistant to rot and mildew. When not in use, cover folds and stores easily in the handy storage bag (included). Note: To determine the correct size cover for your vehicle measure the car from bumper to bumper and order the appropriate total size. Cover will not fit pickups, SUVs and vans.
SKU: 10101-2010145

STEEL FLOOR, FRAME AND UNDERCARRIAGE REPAIR PANELS Repair rusted or damaged critical areas Great for restoring structural integrity Strong 19-gauge steel except where noted which are same as original or where otherwise noted. Stamped and formed as original. Weld-on installation except where bolt-on installation is noted (welder not included). Not primed. Cannot be shipped express. Note: Stock numbers endingin "F" are shipped separately from factory.
Manufacturer: American Designers
SKU: 10101-2009214

YokohamaGeolandar H/T G039 Tire priced from $90.00 to $93.00.
Manufacturer: Yokohama
SKU: Yokohama Geolandar H/T G039 Tire
Category: Automotive Parts and Accessories Parts Tires

Clever design and construction give you a large storage area that has a ombination of CD/tape space, along with storage for large items. The lid slides open and close and locks as well. Features also include 4 cupholders for various sizes of cans and mugs, a change organizer and hinged lid compartment for extra storage. Both compartment lids are nicely padded. The console is upholstered in factory matched vinyl. Custom mounting bracket included for easy installation. Console measures 27" front to back, 8.5" wide and is 9"-12" high front and rear. Fits CJ & Wrangler '68-'95
SKU: 14010 09
Category: Miscellaneous

LEATHER PENDANT NECKLACE WITH MALTESE CROSS ACCENT Adjustable leather string features a pewter MalteseCross with striking antique finish backed by a soft cowhide leather pendant Cross measures approximately 1" x 1"
SKU: 10101-2000097

21" Valeo Ultimate Wiper Blade(EA) pricedfrom $29.99. Valeo Ultimate Wiper Blades priced from $29.99.
Manufacturer: Valeo
SKU: 21" Valeo Ultimate Wiper Blade(EA)
Category: Automotive Parts and Accessories Parts Accessories

The Nasta Stainless Steel Grille Guards are made entirely of stainless steelto provide maximum protection and years of service. Polished to a mirror like finish and a popular Euro design.
Manufacturer: Nasta
SKU: 199
Category: Automotive.Accessories.Grille Guards

CUSTOM-FIT TRUNK WEATHER STRIPPING FOR MUSTANG Meet or exceed OEM standards High-quality molded and/or extruded rubber parts with all correct shapes, bends and contours Replaceoriginals perfectly. Help restore original look and end water leaks, whistling and rattles caused by worn or damaged weather strip, seals and grommets.
Manufacturer: Scott Drake Mustang Parts
SKU: 10101-2009218

GLASS-MOUNT SCANNER RADIO ANTENNA Designed to make everyone think you've got a cellular phone on board! Mount securely to glass?no holesto drill. Weather-resistant black finish. Complete with RG58 cable, hardware and instructions. 3 models: CB, scanner radio and AM/FM antenna.
Manufacturer: Autotek
SKU: 10101-2001453

DELUXE SAFETY GLASS SINGLE REPAIR KIT Don't replace a chipped windshield—repair it! Glass looks like new — visibility in repaired area is substantially restored. Don't replace your entire windshield justbecause of a break or star in the glass. And don't shell out big bucks to a garage or shop to fix the break. Do it yourself and save. Instructions included with kit. Applicator penetrates under glass surface and fills break cavity with a transparent resin that hardens chip crevices to prevent radial cracks. Bond lasts for years. Enough for one 1" repair.
Manufacturer: Clear Star Products
SKU: 10101-2004081

CUSTOM-STYLE TRUNK KIT Replacement bulbs (package of 10)For '86-93 Yamaha XVZ13 Venture® models
SKU: 10101-2003814

RANCHER™ GRILLE GUARD Massive construction and no-drill frame-mount installation for greater strength and protection, increased rigidity and no vibration Bigger is better and thisguard is huge! Heavy-duty 1.9" 14-gauge steel tubing with tough, electrostatically applied black powder coating for extra resistance to corrosion, dings and scratches Designed to match the lines and contours of your truck! Laser-cut 1/4" steel uprights. 16-gauge steel center grille with 1/2" prepunched holes. Built-in oversized step plate for easy access to hood and engine on big trucks. Wire-frame headlight protectors built into brush guards. Lower brush guard supports. Mounts in existing frame holes. Limited 3-year warranty. Shipped separately from factory. NOTE: SKU numbers ending in FE are factory shipped by truck freight.
Manufacturer: Go Industries
SKU: 10101-2009504

The Most Versatile Truck Accessory You'll Ever Own. The Access Roll-Up TonneauCover enhances Your Truck Bed's Functionality and the Sporty Look of the Truck Itself.
Manufacturer: Access
SKU: 245
Category: Automotive.Accessories.Tonneau Covers

CAMSHAFT END COVER SET Get showroom-shiny covers instead of boring originals! Chooseplain style or embossed (eagle and flowing ribbon with "Free Spirit" motto) Chromed die-cast aluminum covers for right and left sides plus chromed socket-head fasteners.
SKU: 10101-2005427

FRONT WHEEL BEARING Complete sealed bearing Replaces worn or damaged original bearing for safer handling and longer tire life For American front-wheel-drive cars, mini vans andtrucks High-grade alloy steel bearing includes race assembly.
Manufacturer: Precision Automotive
SKU: 10101-2009115

SEAL PULLER Remove any oilor grease seal easier than ever with this puller! Two tip sizes allow you to remove wheel bearings, transmission housing, almost anything! Simply insert tip behind seal and pop it out. Approx. 12-1/4"L overall. Black oxide-finished heat-treated steel tips, chrome-plated shank and mechanics' square vinyl handle for sure grip.
Manufacturer: MIT
SKU: 10101-2007850

ROCKET LOCKER STAINLESS STEEL BED RAILS WITH LEDs Mirror-polished NeverRust™ die-cast stainless steel comes with Putco's lifetime warranty Long-lasting built-in LED at the end of each rail operates with brake light, running light, turn signal or hazard lights Wired for easy clamp-on hookup to existing taillight wiringCustom-fit stylish protection for bed plus greater driving safety and extra tie-down points! Clear LED with clear lens glows red with rear taillights. Mount easily in stake bed pockets—no drilling needed. 500-lb. tie-down strength. Sold in pairs.
SKU: 10101-2004659

1974-80CJ WITH 6 OR 8 CYLINDER CAP IS IN CENTER.
SKU: 51210 04
Category: Miscellaneous

S/E ™ COMP CYLINDER HEAD New—not remanufactured Designed to combine the best of an all-out race head and a reworked stock head High flow plus high velocity—flow increased 70% right out of the box! Computer-designed intake ports. Additional material around the fully-machined combustion chamber.Increased valve spring support and valve guide support. 3/4" long-reach spark plug bosses. Extra cooling fins over exhaust port. Forged one-piece stainless steel valves. Dual racing springs. Accepts stock valve cover and clip. No special exhaust or sheet metal needed. Fits any street car without modifications, but modification of your stock dual-port end pieces will be required to match intake ports on heads to run a single carb.
SKU: 10101-2005486

SADDLEBLANKET SEAT COVERS Custom-fitcovers improve the look of your interior with rugged, color accented seat covers Tight fitting, stretchable neotex outer material clings to the contours of your seats for a secure fit Easy slip-fit installation. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2010306

BRUSHED NICKEL IRIDIUM SHIFT KNOB An instant upgrade for factory knob Looks great alone…even moreimpressive with matching pedal pads (sold separately) High-tech metallic finish—the look of the millennium! Easy screw-on installation. For manual transmissions EXCEPT knob with carbon-fiber collar on shaft, which is for automatic transmission only.
SKU: 10101-2003087

REPLACEMENT BUMPER Restores original look and structural integrity Replaces original perfectly—shaped and contoured like original New—not a rechromed or repaired bumper. Available with or without holes for impact strips/pads and end caps (strips and end caps not included). Heavy-gauge steel stampings (chrome-plated or painted as original). Easy bolt-on installation using original mounting hardware. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.SKU numbers ending in E are freight shipped from JC Whitney warehouse by truck/air freight.
SKU: 10101-2004770

Easy to install, one-piece designincorporates non-slip poly step pads for sure-footed entry and exit from your truck. Steps feature rugged 3" diameter by .090" thick tubes that are frame mounted and custom built for each specific truck model. Available in textured black and beautiful stainless steel.
SKU: 71203 522
Category: Miscellaneous

SuperStock wire is designed to upgrade stock ignition systems. With only 500 Ohms per foot of resistance, more ignition energy can reachthe spark plug, producing a hotter, longer lasting spark flame kernel. The result is higher performance through improved efficiency, quicker throttle response and reduced emissions. Double silicone construction is rated to 550° F. Wire sets feature stainless steel plug terminals and fiberglass braiding for greater pull strength and terminal retention. Custom fit applications are easy to install and do not require any cutting.
SKU: 55112 78
Category: Miscellaneous

PITMAN ARM PULLERS Alloy steel construction Available with or without adjustable jaws Make quick workof even the toughest pulling jobs!
Manufacturer: Springfield Wheel Puller
SKU: 10101-2007840

CHROME-PLATED STEEL TRANSMISSION OIL PANS—EXTRA CAPACITY For Ford and GM vehicles Triple-chrome-plated steel Helps cool transmission when towingor during high-performance driving Extra-Capacity Transmission Oil Pan is 1-1/4" deeper than original pan. Increases fluid capacity by 1-1/2 quarts (TH400) or 2 quarts (TH350). Extends transmission life. Chromed drain plug included. Replaces 13-bolt transmission oil pans.
SKU: 10101-2000996

YokohamaAvid V4S Tire priced from $74.00 to $131.00.
Manufacturer: Yokohama
SKU: Yokohama Avid V4S Tire
Category: Automotive Parts and Accessories Parts Tires

CRYSTAL EYES EUROSTYLE TAILLIGHTSBetter visibility and safer driving! Replace broken or ugly stock taillights perfectly SAE/DOT compliant Custom designed for your car. Easy to install. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: In Pro Car Wear
SKU: 10101-2010127

General Grabber UHP Tire priced from $56.00to $402.00.
Manufacturer: General
SKU: General Grabber UHP Tire
Category: Automotive Parts and Accessories Parts Tires

DELUXE BOOSTER CABLES High-quality heavy-duty 4-gauge cables with color-coded insulation 20-ft. long cables suitable for most back-to-front or side-to-side hook-ups Vinyl-coated steel, heavy-duty color-coded clamps with extended contour jaws for fast, easy attachment to top or side-post batteries Tangle-free cable remains flexibleat sub-zero temperatures for use in the most severe weather conditions. Reusable plastic storage case with carrying handle keeps cables clean and out of the way.
Manufacturer: East Penn
SKU: 10101-2006095

UNIVERSAL EXTERNAL COIL WIRE Connects externalcoil to distributor cap.
SKU: 10101-2005119

ELECTRIC WINDSHIELD WASHERS Choice of vertical tank for full size, horizontal tank for import and compact cars or flexible reservoir bag for vehicles with limited space Pressing a button releases a jet spray to clear dirt away Release button to stop spray Improve visibility at a very affordable price! Electric pump features adjustable ball-type nozzles. Motor is mounted on large 1-1/2 qt. unbreakable polyethylene tank. Includes dash pushbutton, wiring, nozzles, tubing, bracketand instructions. For all 12-volt vehicles.
SKU: 10101-2004481

REAR CARGO LINER Extraordinarily durable—include manufacturer's 100-year warranty to last a lifetime Exact-fit liners keep your interior looking new year after year Quick installation and removal for easy cleanups. Durable yet lightweight material resists most liquids including gas andoil. Nonskid finish keeps cargo from shifting and sliding.
Manufacturer: Highland
SKU: 10101-2007471

BBS RSII Sil w/PolStainless Lip Wheels priced from $540.00 to $769.00. BBS RSII Sil w/Pol Stainless Lip Wheels.
Manufacturer: BBS
SKU: BBS RSII Sil w/Pol Stainless Lip Wheels
Category: Automotive Parts and Accessories Parts Wheels

"Ready tospoil your coupe, sedan, SUV or pickup with some rear-end style? Pre-painted or primered spoilers are the finishing touch."
Manufacturer: AutoAnything
SKU: 268
Category: Automotive.Spoilers & Wings

Overheated oil works poorly, and ultimately kills engines. Rock crawling and low speed driving where the engine is working hard can raise oil temperatures to dangerous levels. With an oil cooler, oil will stay at a normal operating temperature during hard duty, you save wear and tear on critical internal friction surfaces.Simple installation. Each kit includes all hoses, a sandwich plate, clear instructions and all mounting hardware. Essential for modified engines. Order by engine horsepower range.
SKU: 94000 03
Category: Miscellaneous

S-K® 1/4" DRIVE 44-PIECE SAE/METRIC SOCKET SET Mirror-polished SuperKrone® finish for maximum corrosion resistance and long life Ratchet features enclosed mechanism with 3-tooth contact for smoother ratchetingaction SureGrip® hex design drives the side of the fastener—not the corner—for greater strength and to prevent rounded edge Set includes: 4-1/2"L ratchet; 2" and 6" extensions: 10 standard SAE sockets (3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16"); 8 deep-well SAE sockets (1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16"); 13 standard metric sockets (4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15mm); 10 deep-well metric sockets (6, 7, 8, 9, 10, 11, 12, 13, 14, 15mm). Compartmented molded plastic carry case also included. Limited lifetime warranty.
Manufacturer: SK Hand Tool
SKU: 10101-2007901

CUSTOM-STYLED ABS PLASTIC HOOD SCOOP FINISHING KIT For molding ABS plastic to metal or fiberglass. Use when a mold-on, no-seam appearance is desired. Includes 1 qt. of fiberglass, hardener, spreader,disposable gloves, plastic cloth, sandpaper and instructions.
Manufacturer: Driver Design
SKU: 10101-2006509

Skyjacker has engineered the New Flex Series of lifts for 4-link suspension systems, previously available only to custom designed show vehicles and monster trucks. Using Teflon lined spherical ball jointed rod ends on the control arms; the level of articulation increases tremendously. Double Flex Kits use heim style joints at both endsof the control arms. The 4" kit includes extended control arms, shocks, coil springs, transfer case lowering kit, bump stops, front & rear track bar brackets, pitman arm, front & rear sway bar links, adjustable track bar and a single steering stabilizer.
SKU: 16117 307
Category: Miscellaneous

PAINTED ULTRA-SHORTY HELMET "Beanie" type helmet with aerodynamic one-piece hand-laminated multilayer fiberglass outer shell Refer to HELMET SIZING CHART C (at left) A contoured-to-fit one-piece expanded polystyrene inner shell with cushiony foam padding Everything you want in a helmet—balance, light weight, toughness…looks! Deluxe liner (described below) plus the venting system make this one of the most comfortable helmets you've ever worn! Black fingertip-adjustable, dual-port, dual-slide forehead vents permit refreshing flow-through ventilation and speed up moisture/perspiration evaporation. Open-ear nylon chin-strap retention system promotes unimpaired hearing. Deluxe wraparound neck/ear storm curtain is fully padded, extra thick and features a soft black cotton/polyester liner (matches interior liner) plus a soft-touch leather-look black vinyl outer cover for more styling. Curtain zips on/off as needed. Outer shell is sanded smooth and then covered with a premium-grade paint (protected by a tough, clear acrylic top coat). Easy soap/water cleanup. 3-snap front and black peak bubble visor with black-finished snaps (finish conceals snaps). Black nylon chin strap with metal "D" ring. Wraparound black rubber composite trim. Meets or exceeds DOT specifications. DELUXE TAILORED-FIT LINER! Full-surround lining. Custom designed of a special black 60% cotton/40% polyester blend. Dual textures! Breathable mesh lining that wraps around the outer bottom edge. When forehead vents are open, this lining allows more air to be pulled up into the helmet for increased air circulation and added warm-weather comfort. Soft, solid lining around the sides of helmet and on the specially padded crown. Darts sewn throughout this lining guarantee one of the best fitspossible—very snug yet very comfortable! IMPORTANT NOTE: See HELMET SIZING CHART at left for helmet sizing information.
SKU: 10101-2000160

LIGHT-UP DELUXE LED LICENSE PLATE FRAME Custom-designed chrome-plated frame features both red and amber LED lights for extra take-notice visibility Wraparound one-piece frame completely encloses license plate Showroom-chromed die-cast metal frame accommodates license plates from 7" x 4" to 8-1/2" x 4-3/8" 3 LED light banks with impact-resistant plastic lenses accent the front borders. Red light bank on top has 8 LEDs that can be wired as running lights or as auxiliary brake lights. The 2 side amber light banks each include 4 LEDs that can be wired as running lights or auxiliary turn signals. Outer frame measures approximately 5-1/8"H x 9-1/8"Lx 3/4"D. Front border is 1"W. Clear acrylic front panel protects your license plate. Polished stainless steel rear backing panel mounts to existing original license plate bracket (uses existing hardware) and adds a bright, finished look. Foam fillers to prevent rattles and wiring instructions included.
SKU: 10101-2001750

E-Z MOUNT™ HITCH BALL Easier to install and has a more secure fit than standard balls Unique dome hex drive on top of ball guarantees trouble-free installation without damage to ball surface Installs using your 3/4" or 1" wrench or socket—no pipe wrenches needed! Nickel/chrome-plated die-cast steel except where noted. Meets V5, SAE J684and CSA D-264 standards.
Manufacturer: Master Lock
SKU: 10101-2004331

SHIFT KNOB With side pushbutton for easy shifting on automatic transmissions Adds a finishing touch Approximately 4-1/2"H. For use with automatic transmissions only.
Manufacturer: Autotecnica
SKU: 10101-2003077

Let your Ford Powerstroke diesel orTriton gas engine reach the next level of performance with the Evolution programmer. 3 programs give you big gains in hp and torque.
Manufacturer: Edge
SKU: 348
Category: Automotive Accessories. Performance Chips

20" Valeo Ultimate Wiper Blade(EA) priced from$29.99. Valeo Ultimate Wiper Blades priced from $29.99.
Manufacturer: Valeo
SKU: 20" Valeo Ultimate Wiper Blade(EA)
Category: Automotive Parts and Accessories Parts Accessories

4-WATT 22-CHANNEL2-WAY RADIOS Clear, crisp communication up to 12 miles in range! 38 privacy codes block reception of unwanted transmissions 22 channels 4-Watts maximum power; eVOX-2 sensitivity levels—easy voive activation, no need for external microphone; NOAA Weather provides 24-hour weather/hazard information; easy button access; vibrating alert; 3 call tones; channel scan; stealth (auto) squelch; HI/LOW power settings; silent operation; keypad lock; channel activity monitor; mic and headphone jacks; auto battery save; roger beep. 2-3/8"W x 4-1/8"H x 1-3/8"D. Maximum range can only be achieved over water or open rural areas under optimum conditions. 3-year warranty.
Manufacturer: Midland
SKU: 10101-2010124

50-FOOT AUXILIARY AIR HOSE FOR AIR COMPRESSORS 50' coiled hose Use with air compressor or air tank to fill inflatableobjects
Manufacturer: Grover Products
SKU: 10101-2009039

MASSIVE POWER BOOSTER FOR BEETLE Guaranteed to instantly cure bucking-off or erratic idle, poor mpg, hard starts, lost performance and all high and low-end misses Smog legal in all states (CARB E.O. #D19-30) Powerful BUG-PAK ignition system is specially made for '54-78 Volkswagen Beetle and Super Beetle Jacobs Electronics combined its optimum computer ignition for Volkswagen with its famous Ultra Coil in one water/shock-proof sealed blue high-tech housing. Ignition and coil are customized to resonate with the Volkswagen ignition to maximize power and mileage and ensure a cooler running engine. Guaranteed horsepower gains of 12-1/2%. Over 17% increase in miles per gallon. BUG-PAK kit also includes a set of our energy core spark plugs—the best, most versatile streetand race wire. These performance wires (8.5mm, less than 200 Ohms/ft.) have metal core and ultra-high-temperature silicone insulation with Teflon™ overlay. For 12-volt negative-ground systems. Note: The Jacobs Electronics BUG-PAK Risk-Free Guarantee: Dyno proven to produce more top torque and mpg than any other ignition on the market; cures all engines problems caused by weak ignition; must meet every quoted improvement; makes such massive improvements in performance that you (the only judge) are impressed; hooks up in under 20 minutes with no cutting or splicing of OEM wires; leaves your original ignition operational as a security backup.
Manufacturer: Jacobs
SKU: 10101-2005125

REVERSE COMPETITION EL™ ELECTRICAL OIL PRESSURE GAUGE Face is Black li type="circle" Electroluminescent dial markings are white when vehicle is not running but glow blue when power is onMorphing control (sold separately) lets you change the dial markings (5 different shades from cool blue to neon green) and intensity for a radical look in any setting Ultra-slim design for easy mounting almost anywhere—all necessary fittings and adapters included 0-100 psi. 90°. Black face with red pointer. Unparalleled precision and accuracy. Vibrationproof air-core meter. Brushed aluminum bezel. 2" diameter.
SKU: 10101-2008810

TYPE 1 DUAL-CARB TURNKEY ENGINE Pre-run! Pre-tuned! Pre-inspected! And ready to install! Volkstroker III counterweighted 8-dowel pin crankshaft 4340 chromoly I-beam connecting rods with 3/8" ARP bolts Loaded with performance features! Lightweight racing lifters, hard-core camshaft and high-rev steel push rods. Mahle flat-top performance pistons and rings and forged rocker arm assembly with swivel ball adjusters. Solex dual 35mm carburetor, 6061-T6 billet linkage and high-flow air cleaners. Bosch® distributor, alternator and ignition "Blue Coil." Scat® chromed tight-fit cooling doghouse fan shroud and cylinder tins. Scat® billet degree pulley system. Engine must be installed by experienced Volkswagen mechanic. Limited one-year warranty.Shipped separately from factory. NOTE: SKU numbers ending in FE are factory shipped by truck freight.
Manufacturer: Scat
SKU: 10101-2010154

CHROME ALTERNATOR Durable chromeplating Completely assembled and ready to bolt on for instant under-hood shine
SKU: 10101-2005064

PETERSEN AUTOMOTIVE CORP. PORTABLE CAR AND TRUCK RAMPS Forall vehicles with up to 8"W tires Heavy-duty 2-pc. Ramps: 6,000-lb. axle weight, 10,000-lb. GVW capacity per pair. Lift car 7-1/2". Welded heavy-gauge steel. Detachable ramps with embossed surface. Rubber feet prevent slipping. Ideal for low-clearance vehicles. 11"W x 8-1/2"H x 36"L. 1-pc. Ramps: 4,000-lb. axle weight., 6,500-lb. GVW capacity per pair. Lift car 8". 10"W x 9-1/4"H x 33"L.
Manufacturer: T & D Metal
SKU: 10101-2004723

DELUXE TRIPLE-VENTED MODULAR FULL-FACE HELMETS A JC Whitney™ Exclusive! Refer to HELMET SIZING CHART B (see below) Enjoy the convenience of an open-face helmet plus the advantages of a full-face helmet Triple-vented for riding comfort…no matter what the weather! Aerodynamic, balanced design. Comfortable…and no high-speed wobble. One-piece injection-molded thermoplastic outer shell. Shock absorbent and penetration resistant. Contoured-to-fit and foam-padded one-piece expanded polystyrene inner shell. Designed to reduce impacts, improve comfort and contribute to the superb fit. Painted finish or bold, new graphics. Outer shell is sanded smooth and then painted with a high-gloss or super-fine metallic paint. Tough, durable clear polyurethane topcoat. Protects and adds extra luster and depth to the high-gloss or metallic finish. Triple-venting system. Fingertip adjustable—you control air circulation for greatest comfort and to speed up perspiration/moisture evaporation. Chin-bar and forehead vents pull air into the helmet, where it circulates freely through the lining and is directed over and around your head by channels molded into the inner shell. Fingertip adjustable flow-through topdiffuser helps pull air out the helmet through the 2 exhaust vents at the rear of the diffuser. Dual-stage chin-bar venting system helps prevent face-shield fog ups: multiport upper deflector directs air up and through the inside front of the chin bar at the same time the molded-in deflector channels breath down and away from face shield. Deluxe comfort liner with dual-textured design. 2-tone black and gray lining wraps around and fits up against the front, sides and back of helmet and on the front of the extra-thick cheek padding to enhance airflow. Special sizing darts sewn throughout the lining (not just at one or two points) plus a specially padded crown section ensure a snug yet comfortable fit. Lining is tailored from a soft, hypoallergenic and breathable microfiber that's both sweat resistant and moisture absorbent. Liner and cheek pads can be removed for cleaning. Strong chin bar. Black vinyl lining. Black nylon chin strap includes comfort pads lined with gray nylon to minimize chafing. Chrome-plated metal "D" rings. Large window. Allows unobstructed peripheral vision. Flexible black gasket wraps around window and fits against face shield for a tight fit and reduced face-shield noise. Soft molded black rubber base/window trim. Multiposition flip-up ratcheting face shield. Clear optical-quality molded polycarbonate, hard coated for maximum scratch resistance. Stays where you want it—left-side finger tab makes adjustments easy. Ratcheting assembly mechanism is hidden under screw-on black plastic side pods. Modular design for easy on/off! Just press a single one-touch button at the front of the chin bar to lift or close the entire modular front (chin bar plus face shield). Lifting up the front lets you put this helmet on more easily
SKU: 10101-2000125

T1 SERIES ROOF WING SPOILER Beautifully designed, built tough and perfectly fitted for your car Ride the wave! Top-quality RIM polyurethane with smooth black finish—virtually unbreakable and famous for exceptional fit Rigorous testing guarantees top quality in every detail. New easy-to-install flush-mount design—no drilling required. Mounting hardware and instructions included. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. TSUNAMI™—QUALITY CRAFTSMANSHIP, DRAMATIC DESIGN A smooth curve. A rounded corner. A sharp line. Small details that make a big difference to the Tsunami™ designers. This team of experts specializes in creating original products that start where factory designers leave off, taking yourcar to a whole new level. The difference is striking yet the transformation is easy. You can rely on all Tsunami™ accessories for superior quality and amazing fit. Extraordinary durability, too—all come with the manufacturer's limited lifetime warranty. Paintable to match or to go hog wild—you choose.
Manufacturer: Tsunami
SKU: 10101-2001920

Dura/Vent covers are made from a new patented three-layer composite fabric. It contains a micropourous film sandwiched between two layers of softand tough polypropylene. The Micropourous film has pores to small that liquids and particles cannot pass through, but moisture vapor still escapes. It is an excellent design for prevention of mold, mildew and ice buildup. Other covers are simply weather resistant, but the Dura/Vent cover is waterproof during all but the heaviest downpours.Independent labs have tested Dura/Vent against the competition for water resistance and breathability. It scores significantly better than both Tyvek and Evolution4 materials.
SKU: 61081 04
Category: Miscellaneous

GAUGECAGE™ SINGLE UNIVERSAL GAUGE POD Adds a performance look to your interior Mounts to pillar post and holds gauge at perfect viewing angle Lets you add an extra gauge in your carwithout altering the dash Accepts 2" or 2-1/16" gauges (not included). Pod attaches with screws or double-sided tape. Paintable black plastic housing may require some trimming or heat-forming over the pillar post (use your hair drier) to achieve the perfect fit.
SKU: 10101-2008950

"Give your truckthe triple crown winner for durability, convenience and style. The Extang Trifecta Tonneau Cover folds open in 3 sections for full truck bed access. And, the Trifecta ships ready to install in minutes. Truly the winning ticket! "
Manufacturer: Extang
SKU: 429
Category: Exterior Accessories. Tonneau Covers

MONDO PERFORMANCE MUFFLERS Designed for the right sound, lookand performance you can feel!
SKU: 10101-2006454

CHROMED AIR CLEANERS Check local emission laws before ordering For 1-, 2- and 4-bbl. carburetors Choose 4" diam. x 3-1/4"H for 1- and 2-bbl. carburetors with 2", 2-5/8" or 2-5/16" neck; 10" diam. x 3-1/2"H for 2- and 4-bbl. carburetors with 2-5/8", 4-7/32" or 5-1/8"neck; 4-1/2" diam. x 3-1/2"H Louvered Air Cleaner for 1- and 2-bbl. carburetors with 2-5/8" neck; 14" diam. x 3"H for 4-bbl. carburetors with 4-7/32" or 5-1/8" neck; or Chromed Air Cleaner Shield for dress-up styling, fits any 14" diam. x 3"H air cleaner with lip. Check local emission laws before ordering.
Manufacturer: Make Waves Instrument
SKU: 10101-2005398

TUNED DUAL HEADER EXHAUST SYSTEMS All aluminized exhaust pipes and mufflers Fiberglass-packed mufflers increase power and gas mileage Custom fit for Jeep® CJ5, CJ6 and CJ7 models Reduces back pressure. Heli-arc welded with nonrestrictive mandrel bends. Includes left- and right-side header, 2 bullet mufflers with extensions and tailpipes, gaskets, hardware and instructions. Cannot be shipped express. NOTE:Check local emission laws before ordering. For '65-71 CJ5 V6 with 81" wheelbase. Exits in front of rear wheels. For '72-82 304 through 401 V8. Exits behind rear wheels.
SKU: 10101-2006360

KYB Gas-A-Just Shock priced from $37.00 to $113.00.

For Performance Cars & Light Trucks

Gas-A-Just shocks are high-pressure gas shock absorbers that are designed to deliver driving control and performance by keeping the tires glued to the road. These high strength, monotube shock absorb
Manufacturer: KYB
SKU: KYB Gas-A-Just Shock
Category: Automotive Parts and Accessories Parts Suspension

DELUXE OPEN-FACE HELMET WITH FACE SHIELD Replacement shields and side pods (including mounting screws) sold separately Refer to HELMET SIZING CHART A (at left) Made to survive lots of hard wear yet lightweight and balanced to fit comfortably Adjustable forehead vent and color-matched rear exhaust vents letair circulate freely around head. Ratcheting flip-up face shield is made of clear injection-molded optical-quality Lexan® and won't block peripheral vision. Assembly is concealed under color-matched plastic side pods. Injection-molded outer shell is made of specially modified polycarbonate alloy to absorb impacts and resist penetration. Contoured to fit 1-pc. polystyrene inner shell absorbs any residual shocks. Outer shell is sanded smooth, then painted with high-grade paint in high-gloss colors. Super-fine flakes create metallic colors for a deep, lustrous finish. Painted finish is protected by a tough clear polyurethane coating. Comfortable EPS foam interior is lined with stain and sweat-resistant plush gray microfiber nylon. Super-thick ear padding reduces noise. Easy soap and water cleanups. Includes strong black nylon chin strap (partially enclosed on each side with vinyl) with steel "D" ring plus black base and/or window rim. Meets or exceeds DOT specifications. IMPORTANT NOTE: See HELMET SIZING CHART at left for helmet sizing information.
SKU: 10101-2000149

FLEXIBLE WIRE LOOM Great for making wiring harnesses. Resists gas, oil, chemicals. Choose black polyethylene loom (withstands temperatures up to 200 degrees F) orgreen high-temperature and flame-resistant polypropylene (for temperatures up to 275 degrees F). Pre-slit for easy feeding of wire, closes securely after wire is installed. Range of sizes. Can cut to desired length.
SKU: 10101-2005382