CLEAR FLOOR MATS F/R/4 @ Automotive online store

CLEAR VINYL FRONT/REAR FLOOR MAT SET Protects your carpeting withouthiding its beauty! Custom tailored to fit your car's floor pan perfectly Heavy-duty super-thick vinyl withstands heavy wear and resists discoloration Handy for every day…or when you take your car in for repairs (keeps greasy boot marks off your carpet). Mats slip in easily and fit beautifully—no alterations necessary. Special nibbed backing holds mats in place without slipping or sliding. Set of 4 for front and rear floor areas. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Coverking
SKU: 10101-2007421

Ingalls Control Arm Bracket priced from$29.00 to $40.00.

Ingalls' Adjustable Control Arm Brackets provide greater flexibility in camber settings.  The kit is designed to replace the original inner fender control arm mounting brackets with new mounting brackets containing offset cam bolts. The positionin
Manufacturer: Ingalls
SKU: Ingalls Control Arm Bracket
Category: Automotive Parts and Accessories Parts Suspension

REPLACEMENT STEEL GAS TANKS Duplicate-of-original Replace damaged or rusted original tank Choose from a variety of styles For '68-95 American pickups, vans and 4x4s Limited 3-year warranty. Rust resistant (20-gauge steel is lead/tin plated inside and out) and strong (electrically welded seams are reinforced and each tank is pressure tested for leaks). Install using existing sending unit and hardware.Always replace rusted straps. New straps sold separately.
Manufacturer: American Designers
SKU: 10101-2005709

Bridgestone Blizzak LM-50 Tirepriced from $118.00.
Manufacturer: Bridgestone
SKU: Bridgestone Blizzak LM-50 Tire
Category: Automotive Parts and Accessories Parts Tires

ADJUSTABLE ENGINE DEFLECTORSDeflectors allow air to be drawn across legs and mid-section when in full-open position to provide coolness in warm weather When in full-closed position, deflectors direct air away from driver while letting engine heat provide warmth Contoured deflectors are molded of dark smoke-tinted 3/16" thick acrylic. Shatter and impact resistant. Mount to black epoxy powder-coated steel brackets. Brackets attach to bike frame at existing mounting points. No drilling required. Brackets, chrome-plated trim panels with chrome-plated acorn nuts, hardware and instructions included. Approximately 6-7/8"W x 9-5/8"H. Sold in pairs.
Manufacturer: National Cycle Inc
SKU: 10101-2005004

BODY LIFT KITS FOR 2WD AND 4WD TRUCKS Raise your truck a full 2" or 3" Designed and tested to withstand the toughest off-road punishment Give your truck that "off-road look" and ability Provide the extra clearance you need for travel overrough, rocky terrain— allow use of big tires or wheels without fender well modifications. Large graphite and glass-impregnated nylon body blocks provide maximum support with minimum weight increase. All necessary blocks, bolts, spacers, adapters and instructions included. Rear Bumper Raising Kit available for '88-98 Chevy/GMC standard and extended cab 1/2- and 3/4-ton pickups, and '92-94 Suburban and '94-01 Ram 1500, 2500 pickup. Eliminates the gap between the body and the top of the bumper when a body lift kit is installed. Includes all the hardware necessary to raise the bumper. 2" or 3" kit available. NOTE: Installation requires 2 people and approx. 1/2 day. Product SKU numbers ending in "F" are shipped separately from the factory. (A) Front bumper brackets included. (B) Front and rear bumper brackets included.
Manufacturer: Perfornance Accessories
SKU: 10101-2005819

When jacking a vehicle on soft ground, nothing helps like the Off-Road Base from Hi-Lift. The Off-Road Base allows the use of anyHi-Lift Jack in very loose ground. The 12" square platform provides a larger lifting foundation & helps prevent the jack from sinking. The Hi-Lift Jack's base fits securely into the Off-Road Base to provide safer and easier jacking out in the field.
SKU: 92200 98
Category: Miscellaneous

REARVALANCE/ROLL PANS Adds a finished, dressed-up look to the rear of your street, custom or off-road pickup Most pans are made of heavy-duty, high-quality urethane to withstand knocks and impacts better than fiberglass Easy to prime and paint after normal surface preparation Mounts below tailgate—mounting hardware is concealed. Installation requires removal of rear bumper—check local laws before ordering. Hardware and instructions included. Urethane pans come with limited lifetime warranty. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Click on item SKU# for additional information.
Manufacturer: Street Scene
SKU: 10101-2001988

ELECTRONIC LED DIGITAL SPEEDOMETER WITH ODOMETER AND TRIP ODOMETER Large red LED readout against black is easily visible even in direct sunlight For vehicles with stock electronic speed sender (usually on most post 1990 vehicles) Display blacks out completely when ignition is off—no visible logos, legends, etc. Million-mile odometer, trip odometer and quarter-mile time display. High-speed 0-60 and 1/4-mile recall. Adjustable speed warning indicator. Self-calibrating at the push of a button. Replaces in-dash gauge or may be mounted on or under dash with gauge panels or housings (not included). Black bezel, hardware and instructions included. Displays 0-999 mph (1-mph increments). For all 12-volt systems. 3-3/8" diameter. For all vehicles with Stock Electric Speed Senders (usually found on most 1990-present vehicles). Vehicles with mechanical speedometer cable instead ofelectronic sender must order sender separately (item # ZX128990 or ZX380079).
Manufacturer: Cyberdyne
SKU: 10101-2008889

VW KARMANN GHIA TAILLIGHT SEALS Help restore original look andeliminate leaks, rattles and wind whistles Custom formed and molded to match originals perfectly For '60-74 Volkswagen Karmann Ghia convertibles and sedans Easily replace old and deteriorated seals on both driver and passenger sides. Ozone-resistant, high-quality EPDM black rubber. Sold in pairs.
SKU: 10101-2009966

Eibach Sport-System Plus Kit priced from $587.00 to $912.00.

The Eibach Sport System Plus Kits are designed by Eibach's team of suspension engineers and ride control experts to offer street performance without sacrificing ride quality. The Sport System Plus Kit is a precisely balancedcombination of sport spring
Manufacturer: Eibach
SKU: Eibach Sport-System Plus Kit
Category: Automotive Parts and Accessories Parts Suspension

STREETROD MUFFLERS Universal-fit mufflers give your ride a custom look and feel Shipped separately from factory. NOTE: SKUnumbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: PATRIOT
SKU: 10101-2006459

ONE-PIECE FULL-FRONT ECONOMY 18OZ CARPET MAT FOR VANS Long-wearing, heavyweight, cut-pile 18-oz. poly carpet Nibbed backing keeps mats in place and prevents curling No-ravel cloth-bound edges Affordable floor protection! Tailored to fit—no cutting or trimming. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reachyou.
SKU: 10101-2007327

INNER DOOR HANDLE SCREW 2 required for each handle. Shippedseparately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2003290

PERFORMANCE PLUS FUEL INJECTOR Increases power and improves throttle response—8% to 14% higher flow ratings than stock! Provides precise control of fuel delivery and atomization for more HP! High- and low-impedance designs based on application tofunction with car's ECUs All new featuring stainless steel main body. Flow tested, balanced and matched to 1.5% of its nominal pound/flow rating. Plug-in bolt-on replacement—no modifications needed. Precision-ground pintle produces a factory-style spray pattern. Low-mass internal needle valve and high-pressure spring assembly ensure faster response time and greater response range. Works with stock or oversized fuel rails.
Manufacturer: Mr. Gasket
SKU: 10101-2005642

ARMRESTS Designed to make traveling in your Jeep® easier and more comfortable Easy on your elbows and strong and solid enough to serve as door pulls Black powder-coated steel frame with textured black polyurethane cushionEasy to install on original-equipment metal doors. No drilling required. Can be painted to match color scheme. Hardware included. Sold in pairs.
Manufacturer: Misch 4x4 Products
SKU: 10101-2003305

Pirelli Scorpion Zero Tire priced from $90.00 to $429.00. The Scorpion Zero Asimmetrico is Pirelli's Street/Sport Truck Summer tire designed for the North American market. It provided year-round traction and handling for light trucks that possess very sporting dispositions. The Scorpion Zero Asimmetrico is Pirelli's choice for driverswho want to drive their light truck through America's various weather conditions, including occasional light snow.The Scorpion Zero Asimmetrico radial's tread compound provides progressive grip in order to avoid harsh vehicle reactions to load transfers when cornering. This compound is molded into an asymmetric tread design that features virtually continuous outside shoulder blocks to enhance cornering stability. The inner shoulder's deeper grooves and four wide circumferential grooves provide water evacuation to resist hydroplaning and enhance foul weather traction. The Scorpion Zero Asimmetrico offers low acoustic noise, high-speed precision and grip during ...
Manufacturer: Pirelli
SKU: Pirelli Scorpion Zero Tire
Category: Automotive Parts and Accessories Parts Tires

YokohamaADVAN Sport Tire priced from $370.00.
Manufacturer: Yokohama
SKU: Yokohama ADVAN Sport Tire
Category: Automotive Parts and Accessories Parts Tires

FULL-WIDTH REAR TRIM-TO-FIT ALL-WEATHER RUBBER FLOOR MAT SET Includes two pieces that can be cut along trim lines to fit your car—looks like a custom-fit one-piece mat when installed Unaffected by tough materials like gas, oil and mud Remains flexible even in extreme temperature Pliable to conform to the contours of your floor. Outer lip, deep channels and sculpted ridges hold more water, slush, grime and dirt for trouble-free cleanups. Anti-skid nibbed backing and positive retention screw help prevent mat slippage, even undergas or brake pedals! Ultra-durable rubber comes with manufacturer's 100-year warranty. Maximum size: 62-3/4"W x 17"D. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Highland
SKU: 10101-2007411

MAR-HYDE SPRAY CHIP STOP Same protection used by auto makers on new cars! Protect lower body panels against stone chips that can cause rust and depreciate vehicle value. Textured coating sprays on easily before you paint your vehicle orover existing finish. Fast drying. Includes two 12 oz. cans.
SKU: 10101-2000783

REMOTE ALARM SYSTEM WITH KEYLESS ENTRY AND SIX BUILT-IN RELAYS 6 on-board relays for starter kill, keyless entry, parking light flash, dome light supervision and power trunk release (parking and dome light power trunk release are dual polarity) Switch-sensing alarm detects attempts to force doors…protect you, your vehicle and its contents 2-stage adjustable shock sensor with built-in warn-away Selectable active/passive arming (passive door trigger delay). Dash-mount LED confirms functions and acts as a visual deterrent. RF safety lockout. Programmable automatic door lock/unlock. Built-in door lock/unlock relay. Alarm feature bypass. Radar sensor port. Arm/disarm and panic with ignition on. Third channel output for add-on remote starter. Output for optional hood/trunk/switch or optional sensor. Additional features: code-hopping transmitter; code keeper (won't lose code in power loss); built-in parking light confirmation relay; multi-vehicle operation; passenger's door unlock; programmable door lock in passive mode; programmable door lock timing; single/double unlock pulse; trigger bypass with transmitter(s); selectable active or passive arming; disarm with channel 2 on/off; faulty sensor bypass; multi-tone siren chirpsto confirm functions; chirp mute with transmitters; programmable chirp deleted; automatic rearm security; anti-carjacking feature; starter kill output; door trigger delay in passive mode; personalized override mode; built-in dual-polarity parking light relay; built-in dual polarity dome light; built-in dual-polarity trunk release relay; remote panic/car finder feature and valet switch; intruder alert memory; dome light and horn honk outputs. Includes two 5-button transmitters (200-ft. range), wiring guide and instructions. For all OE and aftermarket power door lock and power trunk/hatch release systems including Audi, Mercedes and Volkswagen® vacuum systems. Limited lifetime warranty.
Manufacturer: Valiant
SKU: 10101-2001360

WEATHERPROOF 5-1/4" SPEAKER SYSTEM Handles 100-Watts peak power per pair Specially treated construction withstands rain, high humidity, etc. Long-lasting 5-1/4" air-suspension polypropylene woofer with silver Mylar® dual cone. Anodized 10-oz. magnet. 1" aluminum voicecoil. Durable polymer grilles and basket. Built-in grilles and rain guards protect speakers. 4-ohm impedance. Includes stainless steel screws, mounting hardware, wire.
Manufacturer: Pyramid
SKU: 10101-2001309

CARBON-FIBER WINGS Aggressively designed for the street or the track! Fully adjustable Type 2 end caps Manufactured with a dry carbon process that utilizes the latest F1 technology. This process combines resin pre-impregnated carbon-fiber and CNC machined aluminum tooling. Shipped separately from factory. NOTE: SKU numbers ending inF are factory shipped and may take a little longer to reach you.
Manufacturer: 3dCarbon
SKU: 10101-2010188

MODEL 9210 10-BAND RADAR/LASER DETECTOR WITH VOICE ALERT™ Safety Alert®—Warns of emergency vehicle and road hazards from systems equipped with Safety Alert® transmitters Strobe Alert™—A Cobra exclusive! Provides advanced notice of emergency vehicles equipped with Strobe Alert™ VG-2 Alert™—Lets you know when you're under VG-2 radar surveillance VG-2 Undetectable—Makes you immune to VG-2 detection The ultimate in radar technology! This detector incorporates every feature to maximize awareness of your driving environment. UltraBright™ data display uses identification letters to indicate radar band detected. Voice Alert™ provides separate voice identification of all speed monitoring. SafetyAlert® signals—you don't have to take your eyes off the road. Select voice or tone alert. 360° omnidirectional laser gun protection. Detector includes: adjustable windshield mounting bracket; optional fasteners for dash mounting; coiled power cord with cigarette lighter plug; auto mute, city/highway switch; dim switch. With 6 visual alerts, 10 audio alerts; 4 signal strength indicators; electronic memory ("remembers" detector settings) and system-ready prompt. Check local laws before ordering. Approximately 3-1/8"W x 1"H x 4-5/8"D. THE WORLD'S FIRST 10-BAND™ RADAR DETECTOR! 4 Radar Signals: X-band Radar; Ka Superwide; K-band Radar; VG-2 Alert™ System. 4 Laser Signals: LT1 20-20 Laser; Ultra Lyte Laser; ProLaser; ProLaser III. 2 Safety Systems: Safety Alert® System; Strobe Alert™ System.
Manufacturer: Cobra
SKU: 10101-2001725

ADD-A-VISOR Shipped separately from factory. NOTE: SKU numbersending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2003190

PACKWRENCH™ 3-WAY WRENCHIncorporates 3 of the most-used 6-point socket sizes (8, 10, 12mm) on each tip of the "T" Slightly larger than the palm of your hand, it stores easily anywhere Precision heat-treated sockets are bright chrome-plated At this low price, you can afford 2—one to carry with you everywhere on your bike and one for your garage/shop!
Manufacturer: Cruz Tools Inc
SKU: 10101-2007987

Avon TechST Tire priced from $109.00 to $480.00.
Manufacturer: Avon
SKU: Avon Tech ST Tire
Category: Automotive Parts and Accessories Parts Tires

XTREME RACK WITH FREE $50 JC WHITNEY® GIFT CERTIFICATE Order this multi-functional truck rack now to receive a FREE $50 JC Whitney® gift certificate!* Heavy-duty steel with 750 lbs. capacity! Bolt on design—no drilling into truck bed Unique roller system for ease of loading and unloading cargo Multi-functional truck rack with a cool, customized look! Powdercoat finish. 5-year limited warranty. Hardware included.Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. *Gift certificate will be mailed separately.
Manufacturer: Go Rhino
SKU: 10101-2010247

22" PIAA Curved Super SiliconeWiper Blade (EA) priced from $22.00. PIAA Super Silicone Curved Wiper Blades pricedfrom $22.
Manufacturer: PIAA
SKU: 22" PIAA Curved Super SiliconeWiper Blade (EA)
Category: Automotive Parts and Accessories Parts Accessories

PROJECTOR HEADLIGHTS A revolutionary new look for yourcar! Custom-fit Installs easily—uses factory wiring Sold in pairs. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2010133

FRONT LOWER CONTROL ARMS Heavy duty, "Off-road ready" front lower control arms foryour Jeep® Cherokee! Powder coated for the ultimate protection from the elements Includes greaseable polyurethane bushing on axle and frame joints Sold in pairs.
Manufacturer: WP Warrior Products
SKU: 10101-2010402

Putco SSR Side Bed Rails provide the sleek look ofbed rails at a value price. These side bed rails are perfect if you don’t need tie-down holes. NeveRust Stainless Steel Lifetime Warranty.
Manufacturer: Putco
SKU: 169
Category: Automotive.Accessories.Truck Bed Rails

GENERATION II PROJECTOR HEADLIGHT KIT Upgrades car's lighting with the latest look around Precision designed and made to exacting specification for easy installation and a perfect fit Advanced European styling with an aerodynamic twist! Kit includes one pair of headlights to replace both driver's and passenger's side lights. Shipped separately from factory. NOTE: SKU numbersending in F are factory shipped and may take a little longer to reach you.
Manufacturer: APC
SKU: 10101-2003786

PIAA 1100X Clear Driving Kit priced from $209.00. PIAA 1100X ClearDriving Kit priced from $209.
Manufacturer: PIAA
SKU: PIAA 1100X Clear Driving Kit
Category: Automotive Parts and Accessories Parts Accessories

STEEL TRUNK FLOOR SIDE EXTENSION PANEL Repairs rusted or damaged critical area Driver's or passenger's side available Fills area between floor well and side drop-offs. Stamped and formed as original. Weld-on installation. Not primered. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.SKU numbers ending in E are freight shipped from JC Whitney warehouse by truck.
Manufacturer: American Designers
SKU: 10101-2000567

RECLINING RACING SEATFully-reclining racing seat with adjustment handles on both sides of the seat Strong, durable steel frame covered with comfortable injection-molded foam and woven upholstery Supports for shoulders and lower back Seat completely reclines or tilts forward for access to rear seats. Fits either driver or passenger side. Built-in slots for racing belt harness (racing belt harness sold separately). Track adjusts not included.
SKU: 10101-2009764

FRONT/REAR HEAVY-DUTY CARPET MAT SET Heavy-duty, durable 18-oz. cut-pile polypropylene material Tailored for a perfect fit Protects carpeting against fading, wear and tear. Nibbed backing prevents slipping and curling at the no-ravel cloth-bound edges. Removes easily for cleanups.Includes one driver's and one passenger's mat and one rear runner (or 2-pc. mat, depending on application). NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. To receive a color fabric sample(s), call (877) 927-7427 and request the color(s) you would like.
Manufacturer: Mat World
SKU: 10101-2007359

Front drive shaft, overall length 32 5/8" collapsed. Use for '80 CJ7 with 4 cylinders and automatic transmission and for '80-'81 CJ7/CJ8 with 6 & 8 cylinders with automatic transmission.
SKU: 52300 03
Category: Miscellaneous

STEERING STABILIZER REPLACEMENT CARTRIDGE Heavy-duty cartridge includes red shockboot Bolts directly to original vehicle mounts Performance replacement for original equipment stabilizer.
Manufacturer: Rancho Suspension
SKU: 10101-2006212

SHOCK ABSORBERS 3 load settings—up to 700 lbs. load-carrying capacity Chromed, adjustable overload springs Heavy-duty shocks with 1-3/16"piston improve suspension control and handling. 1-pc. die-cast aluminum adjusting collar has 3 load settings to meet your travel needs. Built to withstand hard usage. Easy to install. Adjusting wrench included.
Manufacturer: EMPI
SKU: 10101-2006134

DUAL-TRUMPET AIR HORNS Add the commanding BIG RIG SOUND to your vehicle! Powerful direct-drive electric compressor (included) mounts under hood—NO AIR TANK REQUIRED. Gleaming chrome-plated zinc trumpets are 13" and 15" long and have 3-1/2" diam. bell. Dual trumpets are built into a single base which can be mounted on or under hood, on roof, almost anywhere. Includes tubing, instructions. Note: Horn uses existing vehicle horn button; if you desire a separatehorn control button, order installation kit below. For 12-volt negative-ground.
Manufacturer: Alpex
SKU: 10101-2009000

CHROMED EXHAUST TIPS FOR '55-74 VOLKSWAGEN Fiberglass-packed Choose tapered or straight tip Easy to install. Fits '55-74 Volkswagen Beetle, SuperBeetle, Ghia and Type II models with 1,200-1,600cc engine. Tapered tip looks great…changes annoying exhaust whistle to a low, pleasant sound! Over 2" diam. tapers to approx. 1-3/8". Straight tip is 1-3/8" diam. Replaces original perfectly. Installation Kit available separately.
Manufacturer: EMPI
SKU: 10101-2006270

REPLACEMENT STEEL TAILGATE Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longerto reach you.
SKU: 10101-2000488

LIFT SUPPORTS - GAS-CHARGED REPLACEMENTSFor American and Imported cars & vans Attach easily with existing mounts and hardware Chrome-plated hardened steel piston rods with corrosion-resistant support tubing restore smooth and easy lift action. Harmless nitrogen gas keeps piston rods under constant pressure.
Manufacturer: Strong Arm
SKU: 10101-2010803

COMFORT-RIDE COMPLETESUSPENSION LIFT KIT Durable polyurethane bushings outperform and outlast standard bushings—they won't wear out! Everything you need to lift your truck at a great low price! Premium-quality steel and spring steel components Maintain a comfortable ride while providing extra clearance for bigger tires, protection against body damage on the trail plus a hot off-road look.
SKU: 10101-2005823

2-WAY GMRS RADIO TWIN PACK - 2 MILE RANGE Easy enough for the kids to operate, too! Heavy-duty plastic radios feature a built-in speaker plus a flexible rubber antenna Communication withyour family, friends or work associates has never been easier or more affordable! Twin Pack features call button alerts others that you're trying to get in touch with them; automatic scan searches for busy channels; last channel save; electronic channel/volume control; lock key; confirmation beep. Sparkling clear communications up to 2 miles away (range dependent on terrain and environmental conditions). Plus More! Big bright easy-to-read LCD display. Take them everywhere—lightweight and small enough to fit in your shirt pocket, purse or attach to your belt (swivel clip included). 22-channel operation (8 GMRS/14 FRS). Automatic squelch gets rid of distracting background noise. Built-in VOX (voice activation) for hands-free use. Radios operate on AAA batteries (not included). Power-save circuitry extends battery life (light indicates when battery is low). Sold in pairs.
Manufacturer: Audiovox
SKU: 10101-2001477

EXTRA-LARGE MATTE SILVER PEDAL PADS WITH BLACKINSERTS Extra-large pedal pad—approximately 7-3/4" long Easy clip-on installation to existing pedals with included brackets—no drilling necessary
Manufacturer: Autotecnica
SKU: 10101-2003181

CARBON FIBER RACING SEAT Genuine carbon fiber—perfect for the serious racer! Designed to keep driver firmly seated during rough workouts Covered in premium-quality upholstery Stronger yet lighter in weight than conventional seats. Includes cutouts for 5-point seat belt (not included). Easy to install—drilling required. Seat does not recline. Shipped separately from factory. NOTE: SKU numbers endingin F are factory shipped and may take a little longer to reach you.
SKU: 10101-2006979

BRAKE LIGHT PULSATOR Causes the illumination of brake light to pulsate from bright to dim approx. 5 times per second Small (approx. 1" x 1-1/8" x 1-3/4") controlmodule mounts easily in any convenient spot (including inside saddlebag or travel trunk) Increases bike's visibility and gives drivers behind you more time to react and stop safely Easy installation—requires cutting of brake light wire, installing terminals on cut ends and plugging in to pulsator. Circuitry is water and vibration resistant. Includes connectors and instructions. For 12-volt negative-ground systems. Note: Check local laws regarding legality of pulsating brake light.
SKU: 10101-2003596

HOSE CLAMP COVER KITS Polished and deep anodized aircraft aluminum in a variety of colors Kit covers hose ends and hose clamps for that "finished" look. Choice of hex-shaped or round covers. Hose clamps not included. Kit includes the following clamp covers: eight 3/8"ID for vacuum lines (consists of color-matched, heat-shrinkable tubing); four 11/16"ID for fuel lines and PVC line; two 1"ID for 5/8"ID heater hose; two 1-1/16"ID for 3/4"ID heater hose; two 1-3/4"ID for small radiator hose; two 1-7/8"IDfor larger radiator hose.
Manufacturer: SPECTRE
SKU: 10101-2000892

Continental Vanco WinterContact Tirepriced from $91.00.
Manufacturer: Continental
SKU: Continental Vanco WinterContact Tire
Category: Automotive Parts and Accessories Parts Tires

CAST ALUMINUM LIGHT WINGS Approximately 36"W x 11"H wings act as a sleek alternative to expensive grille guards Hold 2 round or rectangular auxiliary lights(not included) Innovative mounting system allows easy, vibration-free installation to virtually any front bumper (steel or urethane) with a solid mounting area for license plate (wing replaces OE license plate mount) Manufactured for a precise fit and easy installation. Some drilling required. Strong, durable, corrosion-resistant cast aluminum construction. Special keyed security bolt prevents theft. Limited lifetime warranty.
Manufacturer: Carr
SKU: 10101-2004743

CHROME-PLATED HEAVY-DUTY 3-PIECE BOLT-TOGETHER CLAMP Simplifies mounting lights, foot pegs or other custom accessories to your bike Unlike a one-piece clamp, this clamp does not need to be "spread apart" and then "closed up" around frame, handlebar, case guard or engineguard Bolt-together/take-apart steel clamp is approximately 1-1/4"H x 2-7/8"L overall and has a 1-3/8"L mounting tab with 1/2" diameter hole Order by bar size.
SKU: 10101-2006236

10-PC. AUTO BODY TOOL AND REPAIR KIT Great way to save money by doing it yourself All the tools you'll need to repair dents and scratches Kit includes rubber sanding block, 6 sheets of rough sandpaper to remove loose paint and primer, 6 sheets of fine sandpaper to smooth surfaces, 3 different sizes of applicators to spread putty or plastic filler (not included), finishing hammer, dolly, dent puller with self-tapping sheet metal screw that doesn't need starter hole, 2-way file blade holder with one each flat and half-round shaper blades.
SKU: 10101-2004077

MOUNTING FRONT PARK LIGHT PAD WEATHERSTRIPPING OEM quality Easy to install Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer toreach you.
Manufacturer: Metro Molded Parts
SKU: 10101-2003380

SERPENTINE FLOW AIR CONDITIONING CONDENSERS Choose the type with the closest match to your original equipment condenser Use original attachment hardware (bolts, grommets, spacers, etc.) Can be used with R-12 and R-134a refrigerants Exact replacement—requires no additional hardware, fittings or vehicle modifications. Limited 12-month warranty. Labor forwarranty replacement excluded. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: SCS Frigette
SKU: 10101-2002882

367-PC. METRIC BOLT, NUT AND WASHERKIT Heavy-duty hex head bolt sizes from 12mm to 70mm long with metric grade 8.8 nuts and washer diameters from 5mm to 12mm
SKU: 10101-2008039

NON-ADJUSTABLE ANTI-ROLL BARS Dramatically improves handling! Reduces body roll for better tire contact and cornering speed as well as increased traction and torsional stiffness Polyurethane bushings produce instant response on turn-in New roller-groove bushing design reduces friction andmaintains lubrication for smooth, quiet performance. NOTE: Recommended accessories may be required for specific models.
SKU: 10101-2005905

STAINLESS STEEL HOSE CLAMP SETS Slotted hex-head worm screw clamp can be tightened with your screwdriver, wrench or socket—ensures positive pressure around entire diameter. Chose 24- or 60-pc.set, or retaining straps for catalytic converter heat shields.
SKU: 10101-2008031

FRONT UPPER STRUT BAR Lightweight twin-tube bar with ultra-rigid mounting won't flex or pivot like single-tube, single-bar design Improves handling for quick, responsive steering Eliminate frame/chassis flex in weakspots! Especially important when changing to larger tires. Bolts easily to factory strut tower (strongest point of body) for maximum performance and strength. Made of heavy-wall 3/4" and 7/8" diameter steel tubing. Heliarc welded to 1/4" steel mounting plates or aerospace 6061 T-6 aluminum tubing (mirror-like finish). Easy to install.
Manufacturer: NEUSPEED
SKU: 10101-2006190

HIGH-PERFORMANCE HEADER-DUAL EXHAUST SYSTEMS Kits add horsepower for better performance Systems improve fuel economy…reduces back pressure For '70-81 Carmaros and Z-28s and '68-79 Chevy IIs and Novas Dyno-tuned headers have 1-/58" diam. 16-gauge steel tubes leading into 3" collectors. Dual exhaust systems have 2-1/4" diam. 16-gauge aluminized tubes. Bolt to headers without modifications. Tailpipes exit at stock location behind rear wheels. Kits include headers, collectors, gaskets, bolts, exhaust pipes, tailpipes, hangers, instructions and choice of turbo or 3-1/2" diameter glass-pack muffler. For '70-81 Camaros and Z-28s and '68-79 Chevy IIs and Novas with 283 through 400 small-block Chevy V8 engines. NOTE: Air-conditioned cars and pre-1970 cars with exhaust-manifold-mounted alternator require brackets sold separately. Check local emission laws before ordering. NOTE: Thisproduct is intended for off-road or racing use only and is not intended or applicable for highway use. Not legal for sale or use on California pollution-controlled motor vehicles.
SKU: 10101-2006338

REPLACEMENT POWER WINDOW MOTORS AND ASSEMBLIES For cars, trucks and vans Manufactured to original specifications Gear kit included Noexchange necessary. Replace old or malfunctioning window-lift motors perfectly. Restore use of power windows. Install easily using existing hardware. Made with a copper/steel inner core and nylon/steel gears. Door upholstery removal tool sold separately (14ZX3523B).
SKU: 10101-2003035

CARBON FIBER HOOD Show quality…inside and out!Crafted of genuine Class A carbon fiber and high-tech resins Clear-coat mirror-look finish provides UV protection against clouding and yellowing…also allows drilling for easy installation of nozzles and hood pins (not included) Impressive one-piece backing with high-gloss black finish and riveted latches at 4 points. Approximately half the weight of original-equipment hoods. Installs with exiting original hardware. Designed with OE-matching crumble zones. Limited lifetime warranty. OE-style except where indicated as M-Scoop or S-Scoop. Shipped separately from factory. NOTE: SKU numbers ending in FE are factory shipped by truck freight.
Manufacturer: JSP
SKU: 10101-2006522

SATIN STAINLESS STEEL COMPLETE HOOD KIT Complete kit includes set of hood hinges, windshield tie down kit, hood vent and footman loop(without hood catches) Exciting new satin finish features professionally-etched 304 stainless steel All pieces are rustproof A great alternative to ordinary polished stainless steel. Distinctive looking satin-finished accessories are built to last! Hardware has same great finish. Get the newest, hottest look for your Jeep®.
SKU: 10101-2006554

LICENSE PLATE FRAME Mounts using existing hardware Approx. 4-1/4" x 7-1/4" die-cast metal frame has 4 mounting holes (2-3/4" and 5-3/4"apart center to center).Accepts all 4" x 7" license plates. Please note: Drilling of license plate and mounting bracket may be required.
SKU: 10101-2001745