EXHAUST TIP @ Automotive online store

EXHAUST TIP Rustproof T304 stainless steel throughout with a mirror-polished finish Resonated tip is fiberglasspacked to reduce noise Adds a competition look! Weld-on installation. (A) Bolt-on installation with included galvanized hardware. (B) Genuine carbon-fiber insert.
SKU: 10101-2009310

REPLACEMENT SPEEDOMETER CABLE Original-style component helps you complete your interior restoration Replaces a defective or damaged cableperfectly
Manufacturer: Omix Ada
SKU: 10101-2008969

21" PIAA Super SporzaSiliconeW/Spoiler Wiper Blade (BLK) priced from $24.00. PIAA Super Sporza Winged Wiper Blades priced from $24.
Manufacturer: PIAA
SKU: 21" PIAA Super Sporza SiliconeW/Spoiler Wiper Blade (BLK)
Category: Automotive Parts and Accessories Parts Accessories

Diamond plate corner is not pre-cut for tail lights or gas filler.
SKU: 32515 13
Category: Miscellaneous

VELOCITY STACK THROTTLE BODY SPACERS Specially designed to produce power and torque throughout the RPM range Increases throttle response, gas mileage and acceleration Easy to install—takes just minutes! Eliminates the need for a ported throttle bodyby smoothing and reshaping the throttle body entrance—this increases the incoming air velocity at each given RPM!
SKU: 10101-2003973

QUARTER PANELS Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longerto reach you.
SKU: 10101-2000555

RUST CONVERTER Amazing latex-based metal preparation works on rust or clean metal…and it's easy to use, too…brush, roll orspray it on. Also available in aerosol (pkg. of two 10-1/4 oz. cans).
Manufacturer: Bondo
SKU: 10101-2000774

FLYWHEEL KIT From the acknowledged leading manufacturer of sport, performance and racing clutchesin Japan! Custom-fit racing flywheel is made of solid one-piece billet chrome-moly steel Designed to enhance airflow (and clutch cooling) and to reduce weight and inertia for better engine response Unlike aluminum flywheels, ring gear teeth are milled onto the flywheel to help prevent separation. Tested to be explosion-proof to 15,000 RPM. For Exedy Stage 1 and Stage 2 High-performance Clutch Kits. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: EXEDY
SKU: 10101-2009562

GARAGE STOOL WITH LOGO Durable black vinyl-covered cushioned seat wit your favorite logo Perfect for the garage, workstation orgame room Sturdy chrome-plated legs 30" tall overall. 13-1/2" diameter seat.
SKU: 10101-2009943

INTERIOR/EXTERIOR FASTENERS Select from interior trimscrew set or kit, and original-style button-type snaps, 45-pc. trim plug kit, or a 540-pc screw set.
Manufacturer: Car Pak
SKU: 10101-2008048

GAS TANK SENDING UNIT For '73-90 Chevy/GMC pickups Exact replacement for original-equipment unit Invaluable when replacing a faulty gas tank in your pickup. Includes new strainer, lock ring, "O" ring,all terminals/connectors. Fuel pump not included—use existing in-tank electric fuel pump.
Manufacturer: American Designers
SKU: 10101-2005708

DELUXE OVERHEAD SPEAKER SYSTEM High-up mounting means your music won't get lost in the back or the upholsteryImproves sound quality even in vehicles where conventional speakers won't fit No holes to cut and easily installed 6 quality speakers (two 4"-woofers, two 2-1/2" midranges, two 1" tweeters) in a single, low-profile housing that extends only 2-5/8" into your vehicle. Approx. 7" deep, unit has bass reflex port and is covered with attractive, durable black covering. Will not mount on roll bars. Frequency response: 50-20,000 Hz. 4-ohm impedance. Fits all vehicles with up to 52" wide roof (inside measure).
Manufacturer: Audiosonic
SKU: 10101-2001290

STARTER COVERS Insulate your starter from intense exhaust heat Blocks excessive heat that can destroy starter and solenoid Amust for vehicles with high-heat-generating exhaust headers. Withstand temperatures up to 1,000 degrees F without burning, melting or distorting. Covers are approx. 7-1/4" x 22". Select fiberglass starter cover or fiberglass with special heat-reflective aluminized outer cover.
SKU: 10101-2005175

SPORT STYLE FRONT FENDER WITH SPOILER - 3" WIDE High-impact ABS plastic fender is aerodynamically designed to reduce wind drag Helps direct air to oil cooler and cylindersFor street motorcycles with 19" tires (excluding Harley-Davidson motorcycles) Universal mounting. Some drilling required. Approximately 6"W x 7"H (at mounting points) x 29"L (over arc).
Manufacturer: Maier Mfg
SKU: 10101-2008801

CLUTCH MASTER KIT Complete—includes everything you'll need to restore control of your vehicle Why replacedefective clutch components one at a time when you can replace them all with just one easy-to-afford kit! Kit includes cover, disc and bearing with sleeve or hydraulic unit and fork and pilot bearing.
Manufacturer: Omix Ada
SKU: 10101-2001121

BLACKWATER TIRE Heavy-duty4-ply construction…virtually puncture-proof! Outstanding traction on snow and mud in both forward and reverse Smooth, comfortable ride on hard-packed surface…not like other deep-lug tires 1" higher than an OEM tire for more ground clearance. Built-in rim guard protects wheel and prevents anything from wedging between tire and rim. Sized to meet each ATV's specific gearing needs. Fits OEM (stock) wheels.
Manufacturer: Industrial Products
SKU: 10101-2009395

Three piece stainless steel set contains two neoprene-covered windshield standoffs and a footman loop. Hardware included. Fits CJsand '87-'95 Wranglers.
SKU: 13001 13
Category: Miscellaneous

BESTOP® SEAT RISERS Replaces bent,broken or rusted risers on original-equipment seats, TrailMax™ seats and other aftermarket seats Great for hassle-free seat installation when brackets are missing or existing brackets are in bad shape Available for driver's side or passenger's side seat
Manufacturer: Bestop
SKU: 10101-2007085

CUSTOM-FIT ELECTRONIC CRUISE CONTROL KITS State-of-the-art computer-controlled electronics perform like original equipment to accurately monitor speed and functions Functions include set, coast, resume and accelerate Modules monitor speed through vehicle's existing speed sensor For maximum safety, cruise controls automatically deactive (1) when you press brake pedal, (2) if brake lights fail, (3) if vehicle decelerates/accelerates 10 MPH per second and (4) unit is turned off. Kits include command module (may look differently from illustration), all necessary adapters, wiring, hardware and instructions. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped andmay take a little longer to reach you.
Manufacturer: S C S Frigette
SKU: 10101-2001608

Now with just one part number you can replace all of the major suspension components from front to rear with less expense. Kits for '76-'79 include front and rear shackle bushings, front sway bar bushings, body mounts, transmission torque arm bushings, transmission mount, tie-rod end boots.Look on any serious off-road Jeep and you will find polyurethane suspension bushings. Unlike common rubber bushings which lose their shape, and get softer over time, self-lubricating urethane bushings last and last. Polyurethane is not susceptible to the elements that destroy rubber such as oil, road salts, ultraviolet rays and dry rot. Energy Suspension is the world leader in polyurethane suspension components. Major efforts in research and development in both chemical and mechanical engineering have enabled Energy Suspension to become number one.
SKU: 26057 01
Category: Miscellaneous

New high impact stone guards add real protection to all 6 round Daylighters. Give your old lights a new look. Made from super tough polycarbonate plastic. Just as supplied with Slimline lights. Sold individually. Won't fit factory Jeep fog lights.
SKU: 97010 10
Category: Miscellaneous

HEATER CONTROLBOX Stop freezing—restore your vehicle's heating system to tip-top efficiency! Controls heat from heat exchanger
Manufacturer: Dansk Autopart
SKU: 10101-2002916

HEAVY-DUTY PORSCHE TYPE DIAPHRAGM PRESSURE PLATE For positive getaway and rapid acceleration Ready to install…replaces original perfectly For air-cooled Volkswagens Stronger than stock plateto give you more torque from clutch for racing, rallying or for heavy-duty on- or off-road use. Gives longer service.
SKU: 10101-2001102

INSULATING SHEETING Asphalt-based 1/16" thick black sheeting trims easily to conform to panel contours. Reduces resonant vibration and sound distortion inbody panels around speaker installations. Effectively decreases loudness and duration of road, engine sounds. Self-stick backing adheres instantly to body panel, floor pan, firewall—any sheet metal. Covering as little as 10% of a sheet metal panel can significantly dampen sound. Instructions included. 2 sizes: 32" x 54"; 10" x 13", ideal in tight areas (around speakers or power window motors in door or rear side panels).
SKU: 10101-2002977

ADJUSTABLE CASTER/CAMBER GAUGE Measures caster/camber angle (-7 to +7 degrees) easily in minutes Accurate to within 1/8-degree Ideal for front- and rear-wheel drive vehicles with 13", 14" or 15" wheels and tires (including cantilever tires). Top quality, lightweight aluminum alloy gauge is made using space-age bonding process—no welding which can lead to distortion and inaccurate readings. With instructions.
SKU: 10101-2004145

SPARE TIRE CARRIER Brackets help prevent theft when used with lock Fits any trailer tongue or winch stand up to 3-1/2" wide Accepts 8" to 15" diametertrailer wheels with 4 or 5 bolt holes. Rust-resistant zinc-plated steel. Lock not included. For boats and camping trailers.
Manufacturer: Fulton Performance Products
SKU: 10101-2007129

4-STEP LADDERS Ladder with 14"W steps Ellipticalsteps are made of 2" deep extruded aluminum and have no-slip ridges for sure footing Silver anodized 1" diam. aluminum tubing. Ladder installs easily on either rear door. Includes black plastic end caps for each step, hardware and instructions.
Manufacturer: Christianson
SKU: 10101-2009715

Imagine taking the best soft top for Jeep in the world, and making it even better! The Sunrider is a whole new way to look at open top convenience. You can fold the whole top down, but you don't have to. The front of the top quickly flips open to let the sunshine in. Think of the convenience on days when the weather is constantly changing from sun to spitting rain. The Sunrider attaches to the body of the vehicle with a track system. This eliminates snaps of old-fashioned soft tops for Jeep and gives a continuous clean looking weather tight seal.Like any other Supertop, you can fold down the entire top without removal from the top frame and all hardware stays on the Jeep. No loose parts to get lost. All of your favorite Supertop features like removable (and replaceable) windows, EZ Open Tailgate hardware, black powder coated aluminum and steel hardware are part of the package. Each Sunrider is complete with every piece of hardware that you need. Most hardware is factory pre-assembled to cut down on installation time. Nothing extra to buy! The Sunrider is available for all '79-'00 Cj7and Wrangler vehicles, in factory matched colors.
SKU: 11004 01
Category: Miscellaneous

FRONT BUMPER COVER/VALANCE Reshape the look of your vehicle for a performance-styling upgrade! Heavy-duty high-quality urethane construction stands up to road abuse Prime and paint to match vehicle color for a factory-installed look All necessary mounting hardware and instructionsincluded. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Street Scene
SKU: 10101-2010750

LEATHER RIDING JACKETS Absolutely no effort is spared—it will be the most comfortable you've ever worn! Smooth, supple, top-grain cowhide jackets feature expert tailoring and detailingthroughout Stops the wind, resists abrasion and simply looks great Zippered pockets, Thinsulate® lining and more!
Manufacturer: Carr
SKU: 10101-2000086

"MONTANA" SNELL CERTIFIED FULL-FACE HELMET WITH QUICK-RELEASE SHIELD A JC Whitney™ exclusive!Refer to VR-1 HELMET SIZING CHART A (see below) Tough thermoplastic shell resists shocks and penetration Exceptionally comfortable and ruggedly durable! Adjustable ventilation for perfect air flow. Multiposition ratcheting face shield adjusts easily. Removable interior lining. High-quality painted finish is long lasting and great looking…resists chipping. D-ring retention system. Meets or exceeds DOT standards. IMPORTANT NOTE: Click on VR-1 HELMET SIZING CHART link for helmet sizing information.
Manufacturer: VR-1
SKU: 10101-2009745

SATIN FINISH,CHROME, AND BLACK MESH GRILLE INSERT Reshape the look of your vehicle for a performance-styling upgrade! Contoured mesh adds a 3-dimensional look Easy clip-in installation for both main andvalance grilles Covers up traditional black honeycomb insert. All necessary mounting hardware and instructions included. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Street Scene
SKU: 10101-2010561

SEE-THRU FUEL FILTERS Super cleans fuel to ensure top performance Captures dirt and grit as small as 40 microns before they can damage carburetor Not for fuel injectionClear glass body lets you observe filtering action. Chrome-plated end caps. Includes: fuel line filter; replacement element; O-rings; hose clamps. Choose filter for 1/4", 5/16" or 3/8" fuel lines. Filter replacement kit (includes 3 elements and 6 O-rings) available separately.
Manufacturer: Peko
SKU: 10101-2002781

COMBINATION UPPER FAIRING AND FAIRING SIDE PANEL Paintable, molded of super-strong, high-impact black ABS plastic to original specifications Connector piece sold separately Use withoriginal windshield. Available for left or right side. Mount to cycle using existing hardware. Some drilling of replacement part required.
Manufacturer: Maier Mfg
SKU: 10101-2006717

INTAKE OR EXHAUST VALVEGUIDE Intake or exhaust valve guide available for 74-90 water-cooled Volkswagens (excluding 16-valve)
SKU: 10101-2009723

BC SERIES AERO BODY KIT For a sizzlin' new look 4-pc. kit includes front bumper,left- and right-side skirts and rear bumper Made of a premium-quality fiberglass that's strong, smooth yet extremely lightweight Gelcoat finish makes custom painting a snap. Shipped separately from factory. NOTE: SKU numbers ending in FE are factory shipped by truck freight.
Manufacturer: TC Sportline
SKU: 10101-2001971

BILLET ALUMINUM ENGINE DIPSTICK CAP Aircraft-grade aluminum, individually crafted and mirror polished to perfection Easy to install…onlythe turn of a screw! No modifications or alterations required
Manufacturer: GCA
SKU: 10101-2005403

PERFORMANCE RECLINING RACING SEATS Available in extra-wide sizes Easy to install with custom-fit brackets, sold separately The ultimate racing seats combineunsurpassed comfort, support and style! Ergonomically built to fit your build Fully adjustable seat back Fingertip-controlled lever lets you flip seat forward for easier access to rear. High-density injection-molded foam is combined with integrated shoulder, kidney and thigh support. Harness-belt capability. Custom-fit brackets sold separately (Item # ZX263006). Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2009861

Why use plain old luggage when you're on the road? You and your gear deserve bags that say "I am aJeep Enthusiast". Constructed of Ripstop nylon in black & other primary colors, these water resistant packs feature haevy duty hardware and self-correcting zippers.
SKU: 15013 02
Category: Miscellaneous

STANDARD LAP BELT Keeps you and your passengers safe on and off the road Perfect replacement for worn or damaged original MeetsFederal Vehicle Safety Standards Hardware included.
Manufacturer: Beams
SKU: 10101-2006837

Koni Special Strut priced from $69.00 to $187.00.

KONI Special shock absorbers(painted red) were developed for drivers who want to improve their vehicle in general by providing better comfort and handling.

FUEL PUMP MOUNT Fuel pump mount allows fuel pump to be mounted inthe stock location. Includes gasket and mounting.
Manufacturer: PUROLATOR
SKU: 10101-2005673

FOG AND DRIVING LIGHTS WITH NEON ACCENT RING Color ring adds a soft neon glow to lights The perfect finishing touch for our other neon accessories Ring illuminates at the flip of a switch Easy to install. Lights have black housing, clear lens. Fog lights measure 4-3/8" diam. x 2-1/2"D. Driving lights measure 2-7/8"W x 2-1/8"H x 2-1/2"D. Includes 2 lights, universal mounting bracket, wiring harness and neon-control switch. Limited1-year warranty.
SKU: 10101-2003743

CLIP-ON FUNNEL Protects against spills and drips in engine compartment or work area Convenient touse—slips onto neck of plastic container Chemically-resistant co-polymer polypropylene 2"W x 2-1/2"L with 7/8"OD spout. Red color. Limited one-year warranty.
Manufacturer: WIRTH CO
SKU: 10101-2009452

REPLACEMENT TAILLIGHT LENS Replacesoriginal perfectly Available for driver's or passenger's side DOT and SAE approved—meet all state and federal regulations. Includes housing, lens and seal. For 12-volt negative-ground systems.
Manufacturer: EMPI
SKU: 10101-2003574

ULTRA-LIFT TONNEAU COVER Entire cover lifts up for easy access to bed Strong rustproof frame clamps onto bed in less than 30 minutes—no drilling required For pickups Put an end to those struggles of getting to stored cargo or bed. Simply lift up the entire cover like a hatch—2 gas struts hold it open. Fabric cover is also removable. Padding prevents damaging metal-to-metal contact. Black weather-resistant heavy-duty vinyl cover is fastened to rails—no snaps to rust or corrode. Unique bow support design increases cover strength while speedingup water run off. Manufacturer’s lifetime warranty on rails, bows and clamps. One-year warranty on fabric. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2009299

1/2" DRIVE HEAVY-DUTY IMPACT WRENCH Even our most affordable 1/2" drive delivers 250 ft./lbs. oftorque. No-load speed: 7,500 rpm. Approx. 7"L, weighs 5 lbs. Air consumption at 90-psi: 4 cfm.
SKU: 10101-2007649

GAS TANK GROMMET Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take alittle longer to reach you.
Manufacturer: Omix Ada
SKU: 10101-2009757

PREDATIR™ INFRARED REFRIGERANT LEAK DETECTOR Rechargeable battery provides holds a 5 hour charge—can be recharged over 600 times! Lightweight hand-held water-resistant construction with top-quality infrared sensor—provides flawlessly accurate readings and never needs replacing! Detects leaks in the most hard-to-find locations Features include audible alarm (with on/off switch),visual alarm, easy-to-read color-coded LED display and low-battery indicator. Nicad battery, carrying case, 120-volt AC battery charger, operating manual, spare tip filters and spare O-rings included. Manufacturer's 3-year warranty on leak detector; one-year warranty on battery and pump. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2004208

DOOR BARS Looks like a full roll cage but without the expense! Goes across door openings…helps reduce body flex at B-pillar Attaches to the floor at the B-pillar and at the front of the driver side and passenger side doors Height at the B-pillar is adjustable to control ease of entry. Fully adjustable for acustom fit in your vehicle. Drilling required. Hardware and instructions included. Not a safety device. Sold in pairs.
Manufacturer: Arospeed
SKU: 10101-2003059

HARLEY-DAVIDSON® TIRE COVER Water-resistant material with UV inhibitors Silk-screened graphic Fits 26-3/4" to 29" diam. tires. Since its origins 95 years ago, the Harley-Davidson® mystique has grown in stature and fame.Today, Harley-Davidson® is legendary. Be a part of this legend with this officially licensed Harley-Davidson® tire cover. Water-resistant material with UV inhibitors. Silk-screened graphic.
Manufacturer: Plasticolor
SKU: 10101-2007410

FILM AID CONCENTRATE KIT Simplifies window film installation and removal 1-1/4 oz.
SKU: 10101-2003173

Why use plain old luggage when you're on the road? You and your gear deserve bags that say "I am a Jeep enthusiast". Constructed of Ripstop nylon in black & otherprimary colors, these water resistant packs feature heavy duty hardware and self-correcting zippers
SKU: 15012 53
Category: Miscellaneous

TANK PROTECTORS Protect your tank from accidental scratches Durable all-weather composite material conforms perfectly to tank Match to your bike for a customlook Easy to install—super-strong tape keeps pad in place.
SKU: 10101-2009963

"Dustop™ Car Cover is madeof an extremely lightweight 4-layer composite, lined with soft polyester, laminated for dust protection. Superior indoor and limited outdoor protection against sun. "
Manufacturer: CoverCraft
SKU: 69
Category: Automotive.Accessories.Car Covers

A great addition to all CJ & '87-'95 Wrangler sound systems. This unique speaker housing easily attaches to the floorin front of the gear shifter using two supplied self-tapping hex-head screws. Constructed of durable 1/8" plastic, these pods are built to last. Concealed wire lead hole makes for clean installation. Housing can also be purchased with speakers. All necessary . hardware and instructions are included.

OVAL TUBE STEP™ RAILS Custom-fit extruded aluminum for looks and maximum rust protection for a lifetime of service Extra-wide 6" diameter elliptical step surface for sure footing Recessed 5"W black molded plastic step pads are grooved end to end to provide an extended nonslip step surface and to channel water away Permanent black molded plastic end caps complete the overall look. Vehicle-specific mounting kit included for easy installation. No drilling intovehicle frame required. Limited lifetime warranty. Sold in pairs.
Manufacturer: Westin
SKU: 10101-2001833

SOLAR BATTERY 7-AMP CHARGE CONTROLLER Protects battery from being overcharged or discharging Regulates voltage to protect appliances Required when adding 2 additional15-Watt solar panels to battery charging kits
Manufacturer: ICP
SKU: 10101-2001702

Bridgestone BlizzakLM-22 Tire priced from $101.00 to $253.00. Blizzak LM-22 studless winter tires were developed to combine good snow and ice traction with European high-speed winter driving performance. Available in low profile, H-speed rated sizes; Blizzak LM-22 tires are for the drivers of high performance sport cars, sport coupes and sport sedans who require winter driving traction on dry, wet and snow-covered roads.Blizzak LM-22 studless winter tires feature a directional tread design to enhance hydroplaning resistance on wet and slush-covered roads with rounded tread shoulders to enhance dry and wet road handling. Their tread compound has a high silica content instead of the Multicell tread compounds used on other Blizzak winter tires. This allows Blizzak LM-22 tires to combine winter traction with H-speed rated durability (current Multicell compounds can not support 130 mph H-speed ratings). The Blizzak LM-22 tires feature an independent block tread design which employs the Lamellen "edge ...
Manufacturer: Bridgestone
SKU: Bridgestone Blizzak LM-22 Tire
Category: Automotive Parts and Accessories Parts Tires

WINDOW CHANNEL KIT For '52-78 VW Beetle and Super Beetle Seals out dust andrain—ends window rattling U-shaped channels smoothly guide glass, let window regulators work properly. Easy to install—will not kink or buckle. 4-pc. kit services both front-door windows.
SKU: 10101-2009965

COMPLETE STAINLESS-STEEL-LOOK HOSE AND CLAMP COVER KITS The look of stainless steel at a fraction of the price Choice of anodized or chromed hex-shaped clamp covers Braided, tin-plated copper hose covers look like much more expensive aircraft-quality steel. Easy to install?slide braided sleeves over hoses, slip on the end clamp covers, then install hoses on engine. Includes: 3 ft. of 1/4" to 3/8" I.D. sleeve and 4 length of 3/8" I.D. heat-shrink tubing (color matched to other clamp covers) for vacuum lines; 4 ft. of 1/2" to 3/4" I.D. sleeve plus four 11/16" I.D. clamp covers for fuel lines; PVC hose; 12 ft. of 3/4" to 1-1/4" I.D. sleeve lines; four 1" I.D. clamp covers for heater hose; AC line; 4-1/2 ft. of 1-3/4" to 2-1/4" I.D. sleeve plus two2-1/8" I.D. clamp covers for radiator hose.
Manufacturer: SPECTRE
SKU: 10101-2000895

R134A SYNTHETIC A/C BOOSTER WITH REUSABLE RECHARGE HOSE AND INLINE GAUGE A cutting-edge lubricant forautomotive air conditioners—lubricates all metal components, including the compressor Reduces coefficient friction and heat caused by friction Resists wiping, prevents oil film rupture, gives a smoother surface for less drag, suppresses foaming and creates a greater load-bearing shield Improves air conditioner's cooling performance up to 18%! Requires less energy and cools more efficiently. Increases heat transfer by guarding against lubricant migration on the heat exchange surfaces of the evaporator and condenser coils. Prevents oxidation and sludge build up, extends life of compressor and reduces engine drag for better gas mileage. For use in any auto air condition. Polyalklylene Glycol (PAG) and Polyol Ester (POE) lubricant compatible. 17-oz. R134a and 2-oz. Sub Zero Synthetic with reusable recharge hose and inline gauge included. Note: Not for sale in Wisconsin.
SKU: 10101-2002852

TRIPLE-VENTED FULL-FACE HELMETS Aerodynamically-designed and balanced helmets feature hard-coat-protected painted colors Refer to HELMET SIZING CHART A (see below) Easy-wearing helmets minimize wind drag and high-speed wobble Top looks, features and comfort at an affordable price. Black nylon chin strap with steel "D" rings is cushioned on the sides to minimize chafing. Black rubber base and window trim add to the overall good looks. Meet or exceed DOT specification. OUTER SHELL. Made of injection-molded thermoplastic that has been specially modified for toughness and to absorb impacts and resist penetration. One-piece design features an integral padded and lined chin bar for even greater strength plus a large window for unobstructed peripheral vision. INTERIOR. Designed for comfort and fit! Contoured-to-fit one-piece polystyrene foam inner shell helps absorb residual shocks. Comfort-contoured breathable foam padding is bonded to a deluxe dual-tone dual-function liner. Perforated black microfiber nylon lines the bottom, the ear cavities and the crown (front to back) to increase air circulation. The remainder of the interior features plush brushed blue-gray nylon and has sewn-in sizing darts throughout to ensure a super fit and hours of relaxed riding. Seat-resistant lining helps prevent that clammy feeling on hotter days. THREE VENTS. Fingertip-adjustable forehead and chin-bar vents allow all-around ventilation and airflow to accelerate perspiration evaporation and to keep you comfortable at all times. Molded-in air scoops andexhaust vents at rear keep air flowing inside the helmet. Chin bar and forehead vents are black. PROTECTED PAINTED FINISH. Outer shell is sanded smooth and then painted with premium paint. Ultra-fine flakes are used for the metallic colors to achieve the deep luster. Tough clear polyurethane hard coating protects painted finish against scratches and allows easy soap and water cleanups. MULTIPOSITION FACE SHIELD. Flip-up ratcheting shield is made of clear optical-quality, injection-molded Lexan® and is treated to resist scratches. Center tab allows one-finger adjustments. Multiposition ratchet assembly is concealed under screw-on plastic side pods that are painted to match helmet. Replacement clear and smoke-tinted face shields and replacement colored side pods with hardware also available separately. IMPORTANT NOTE: Click on HELMET SIZING CHART link for helmet sizing information.
SKU: 10101-2000128

SOLID-STATE ELECTRIC FUEL PUMPS Replaces or bypasses mechanical fuel pump Prevents vapor lock—dependable fuel supply in the hottest weather or high altitude Fuel pump mount and block-off plate sold separately Compact and lightweight—less than 3" in any direction. Delivers Fuel At Up to 30 Gallons Per Hour. Pressure Rated at 2-4 psi. Weighs Only 18 oz. Not for fuel-injected engines. Compatible with all fuels and additives. Not for fuel-injected engines. Fuel pump mount allows fuel pump to be mounted in the stock location. Includes gasketand mounting. Fuel Pump Block-off Plate blocks off mounting area of old removed pump if mounting new pump in a remote location. Includes gasket.
Manufacturer: PUROLATOR
SKU: 10101-2005660

LOWERING COIL SPRINGS Drop car 1.3" to 2.25" Quality made using the finest materials, sound engineering and stringent configuration tolerances Cold wound on precision CNC coiling machines to exact specifications Tempered, shot peened, ground andset solid to prevent fatigue/sagging After manufacture, all springs are inspected for quality assurance, powder coated and stamped with the Gold-Line logo. Lifetime no-sag warranty. Set of 4.
Manufacturer: Gold-Line
SKU: 10101-2005866