COLD AIR INTAKE @ Automotive online store

COLD AIR INTAKE Designed specifically for European cars Relocates air intake way from hot engine…draws in a colder charge of air for more power and improved performance 6061 aluminum tubing is mandrel bent to fityour car perfectly—looks great under the hood! Tubing diameter is custom formed for each application, ensure the best airflow possible. Includes high-flow easy-to-clean cotton gauze filter.
Manufacturer: Injen Technology
SKU: 10101-2005545

RIDE CONTROL LOAD-ASSISTING ADJUSTABLE AIR SPRINGS Specifically designed for mid- and full-size trucks used for light- to medium-load towing Ensure the smoothest ride on loaded or unloaded vehicles Adjust to vehicle's load condition for improved driving comfort and control. Prevent sag when hauling a heavy load or towing, causing trailer and body sway, a rough ride, vehicle bounce and even bottoming out. Will also support "softer" original-equipment suspensions without changing the ride. Provide upto 2,500 lbs. of leveling capacity. Simply inflate or deflate to adjust spring rate, restore ride height and stop bounce, dip and vehicle sway. Easy do-it-yourself installation with simple hand tools. For rear leaf springs. 2 air springs, 2 inflation valves, all fittings, air lines, mounting hardware and installation instructions included. Use service station air hose to inflate springs or order an on-board air supply system (sold separately). Never exceed manufacturer's recommended gross vehicle rating. Sold in pairs.
Manufacturer: Air Lift
SKU: 10101-2005933

SUPER COILS Upgrade your ignition for quicker starts, crisper throttleresponse and increased power and performance
Manufacturer: Mr. Gasket
SKU: 10101-2005144

UPPER AND LOWER BALL-JOINT SUSPENSION ASSEMBLY Improves steering! Engineered to give longer trouble-free service than original equipment For American cars, vans, trucks,pickups and SUVs Eliminates noise, erratic steering and unstable front-end suspension caused by worn ball joints. Specially designed bearings for better lubrication to all wear surfaces reduce friction and wear to a minimum. Gaskets and rubber seats keep grease in, dirt and moisture out. R=Right (passenger's side), L=Left (driver's side), FWD=Front-Wheel Drive, RWD=Rear-Wheel Drive. (A) Without disc brakes. (B) Ball joint and control arm assembly. (C) Threaded-fit.
SKU: 10101-2005784

TURBOCHARGER KIT Provides added power but also drivability and smoothness you just can't beat A throwback to yesteryear but with a modern design using minimal number of parts for installation that's a snap! Doubles the horsepower—for everyday use or on-track performance This is the kit you've been waiting for…performance power, a smooth drive and easy installation make it well worth the wait! An exclusive Tri-Y header system improves response building 7-psi boost by 1800 RPM. The moderate-size turbo helps provide install boost at cruising speeds. Designed to fit under standard sedan deck lid with readily available aftermarket spacers. Comes with throttle cable assembly and a unique exhaust outlet pipe that has two 2-1/2" outlets in stock sedan locations for that "stealth" look. Kitincludes custom T-25 Turbo with integral adjustable wastegate preset to 6 psi, custom-jetted 40 DCOE Weber carburetor, pac-formed hardline oil feel lines plumbed through compressor housing and carb adapter to aid in cooling turbo oil. Installation also requires electric fuel pump and regulator, air filter assembly and throttle cable (not included with system). Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2005760

HEADLINER TRIM KITS FOR VINTAGE/OLDER CARS The finishing touch! Windlace (door trim) should be replaced when installing anew headliner Kit includes windlace, tacks and wire-ons (for 1935-1948 GM models) or trim cement. Note: Duringthe mid-1960s, cars and trucks began using push-on windlace. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Acme Auto Headlining
SKU: 10101-2002945

FLAMES BUCKET SEAT COVER An exciting alternative to traditional flames designs and a great cover-up for any bucket seat Keeps your seatlooking good even after lots of hard work and hard play Black plush velour fabric is accented with bright silk-screened flames Plush velour front with stretch knit back. Installs easily in minutes. No tools needed. Will not fit armrest.
SKU: 10101-2006909

SPLITREAR CAT-BACK EXHAUST KIT Aluminized mandrel-bent pipes 2 FREE stainless steel (T304) slash-cut tips Featuring the famous Gibson Hi-flow turbo muffler—aggressive, powerful exhaust tone Get great horsepower gains and torque with less back pressure! Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Gibson Performance Exhaust
SKU: 10101-2006403

TIMING BELT Restoresoriginal perfectly Helps restore proper valve and ignition timing
Manufacturer: Bando
SKU: 10101-2005494

2" DIAMETER ILLUMINATED MECHANICAL OIL PRESSURE GAUGE Displays 0-80 lbs.—black dial, white numerals and black bezelGives actual reading Chromed mounting panels include all fittings and instructions for 6- or 12-volt.
Manufacturer: Equus
SKU: 10101-2008817

VOLKSWAGEN UNIVERSAL TOW BAR KIT Engineered to the professional standards required by the Volkswagen enthusiast Heavy-duty steel construction stands up to years of abuse An original BUGPACK concept, this kit is designed foreasy installation A tow bar for a multitude of uses. It's basic design allows adaptation to many vehicles. All hardware and instructions included. Mounting plate sold separately.
Manufacturer: Bugpack
SKU: 10101-2010345

BATTERY FILLER WITH AUTOMATIC SHUT-OFF Large 2-1/4-qt. capacity. Container with sure-grip handle lets you easilyfill batteries without spills. Automatically shuts off when cell is full. Made of acid-resistant, super-tough polyethylene.
SKU: 10101-2006127

POWERFORCE™ HARMONIC DAMPER FOR FORD This spacer is usually required on 1980 and earlier 351 Ford Racing HO engines or1980 and later 351W, 302 or 5.0L engines using the Ford Racing .917" Crank Sprocket.
Manufacturer: Professional Products
SKU: 10101-2000245

TRUNK WEATHER STRIP Replaces worn, deteriorated weather strip Easy push-on installation For '74-87 GM cars Durable extruded black EPDM foam rubber (shaped like original) resists smog, ozone, shrinking and fading. Large bulb extrusion helps restore original seal. Eliminates leaks and drafts…keeps out dust and dirt…endssqueaks and rattles. Molded-in steel clips for secure installation to pinch welds in trunk opening. No glue or special tools needed—some trimming may be required. 17-ft. roll. To receive a weather strip sample, call 800-603-4383.
Manufacturer: Fairchild Industries
SKU: 10101-2008721

Dusters, Tonneaus - call them what you like, they provide protection and a clean smooth look. Available in a wide assortment of sizes and factory-match colors. Models are available for Jeeps without soft tops, Jeeps with Supertops and Jeeps with factory tops. Quick to cover and quick to remove. Easy installation - attaches to a track mounting rail. Protects from mud, rain, etc. Looks great with a Bikini Top and a Windjammer. Versions available for all CJ7/Wrangler vehicles from '80-'00. **Duster deck covers will not fit some CJ7 models with a roll bar assembly**#11154.xx for '97-'00 Wrangler with factory soft top #11157.xx for '97-'00Wrangler with hard top #11054.xx for '92-'95 Wrangler with factory soft top #11058.xx for '92-'95 Wrangler with hard top #11056.xx for '92-'95 Wrangler with Supertop #11051.xx for '87-'91 Wrangler with factory soft top with 1/2 steel #11057.xx for '80-'86 CJ7 and '87-'91 Wrangler with hardtop #21051.xx for '80-'86 CJ7 and '87-'91 Wrangler with Supertop
SKU: 11051 15
Category: Miscellaneous

RECEIVER MOUNT FOLD DOWN BIKE CARRIERS Heavy-duty 2" tubular steel is powder-coated for superior corrosion/rust resistance No more stretching to load and unload your bikes! Single clamp securely holds and simplifies mounting and removal of 2 bikes. Clamp is lockable to prevent theft (2 keys included) and rubberized to protect bike's finish andcables. Long vertical bike support can be removed when carrier is not in use. No tools needed. No need to remove entire carrier from receiver hitch. One-time installation to hitch. Fold-down design for easy access to the rear of your vehicle and mounting/dismounting of bikes. Adapters and accessories sold separately.
Manufacturer: Steel Force
SKU: 10101-2007120

1.7 CUBIC FOOT REFRIGERATOR 2 adjustable shelves accommodate 1/2-gallon cartonsand 2-liter bottles Unfinished sides for built-in applications Keeps food cold longer than icebox; eliminates mess and frequent cleaning. Door has black front panel, opens right- or left-handed. Draw: 1.5 amps on AC 12 amps on DC. Cut-out size: 20-5/8" H x 17-1/2" W x 21-1/4" D. New installation requires access panel and vent (sold separately).
Manufacturer: Norcold
SKU: 10101-2003211

FUEL INJECTION PERFORMANCE KIT Super feature: achieve optimal performance and increased horsepower! Allows greater airflow to engine Replaces factory airfilter housing with high-flow washable/reusable Filtercharger® element Dynamic design creates an unrestricted, free-flow air path to the fuel-injection system. Result? A major plus for your Wrangler's performance. California Air Resources Board (C.A.R.B.) approved. Made from heat-resistant materials. Filter care service kit includes 8-oz. squeeze oil, 12-oz. filter cleaner and service decal.
Manufacturer: K&N
SKU: 10101-2005648

EMERGENCY RADIATOR/HEATER HOSE REPAIR KIT Installs in seconds to provide a quick, temporary solution for a radiator or heater hose break Kit can be used to splice and mend small hoses from 1/2" to 3/4" and larger hoses from 1-1/4" to 2" Kit contains 2 emergency hose connectors, tape, razor knife and 6-qt.emergency water bag. Limited one-year warranty.
Manufacturer: WIRTH CO
SKU: 10101-2008176

CUSTOM-FIT STAINLESS STEEL STEP RAILS Extra styling for your truck, easier entry/exit for you and your passengers Big 3" diameter tubing Black injection-molded composite steppad for safe, no-slip footing Easy do-it-yourself installation without drilling. Limited warranties: lifetime on stainless. Sold in pairs. NOTE: SKU numbers ending in E are freight shipped from JC Whitney warehouse by truck/air freight.
Manufacturer: Bully
SKU: 10101-2009786

Urethane motor mounts prevent the engine from torque and twisting under the hood under extreme conditions. They will not mush out and distort like the original rubber bushings. For 6 Cylinder engines only. Sold individually, 2 required.
SKU: 26057 51
Category: Miscellaneous

COIL SPRING HELPER/STABILIZER Adds 1,000-lb. load-leveling capacity, fights roll and stabilizes rear suspension! Increased spring rate minimizes body roll and stabilizes rear for better control and easier handling without sacrificing riding comfort Progressive-rate helper spring is made of 4140 chrome-moly, heat-treated spring steel with hammer-tone gray powder-coated finish for looks and corrosion resistance Easy bolt-on installation—spring mounts with polyurethane crossbar insulators. For 1/2-tontrucks with rear coil spring suspension. Limited lifetime warranty.
Manufacturer: Hellwig Products
SKU: 10101-2005882

FUEL TANK LINER KIT Seals pinholes and hairline cracks in old tanks Prevents rust and corrosion and protects fuel against contamination in new tanks Liner adheres beautifully to inside of fuel tank, sets up fast and cures to a smooth, tough, permanent elastomer finish.White color helps you see that tank is thoroughly coated. Resists leaded and unleaded gas, gasohol, octane boosters and fuel additives when used as recommended. Includes one quart of liner, one pint of concentrated washer/cleaner, 1/2 pint of conditioner and instructions. Fuel Tank Liner. Includes one gallon of liner and instructions.
Manufacturer: Kreem
SKU: 10101-2000795

WATERPROOF PADDED REAR RACK PACK Contoured to fit your rear rack perfectly! Generously sized-30" x 19" x 6" overall 3 large compartments, each with its own deluxe zipper, can hold all sorts of gear Mounts quickly, easily on rear rack. 8 pairs of hook/loop straps hold pack in place.Rugged 600-denier polyester pack material with waterproof (not water-resistant) coating. Storm flaps help keep gear dry. The 1/2" thick closed-cell foam bottom allows pack to double as a comfortable seat when removed from the ATV. Please note: Pack is NOT intended for use as a seat when mounted on the ATV.
Manufacturer: ATV Logic
SKU: 10101-2007172

INNER DOOR BOTTOM Repair rusted and dented door bottom with this perfect-fit, die-formed and shaped door bottom Heavy-gauge primer-coated steel prohibits rust Fits '54-79 Volkswagen Beetles and Super Beetles Available for driver's or passenger's side. Installs easily with screws, by welding or by riveting (welder or rivet gun not included). Finish with epoxy filler (sold separately) and paint.
SKU: 10101-2000450

Stylish pullover sweatshirts in neutral tones that are perfect for the day at the beach or for layering to stay warm. The soft and cozy material makes this a year round winner! Available in M, L, XL or XXL.
SKU: 15159 54
Category: Miscellaneous

STAINLESS STEEL FLAT HALF-SHIELDS These headlight accents allow you to use your high beams without blinding oncoming motorists for safer nighttimeor bad-weather driving. Easy installation. Note: Check local laws regarding use.
SKU: 10101-2002062

Let the Volant Air Intake System help yourealize the true driving potential of your pickup or SUV. You'll get more air for maximum horsepower and awesome throttle response.
Manufacturer: Volant
SKU: 239
Category: Automotive.Accessories.Performance

SPARE TIRE COVER Weatherproof vinyl-coated polyester and cottondenim fabric protects tire from the elements Completes your Smittybilt® Outland™ look! Limited 5-year warranty.
SKU: 10101-2003892

BILLET METERING BLOCK Enhances the performance of your Proform® High-flow Carburetor Main Body Durable solid billet construction prevents porosity, consistency, warping or long-term heat-related problems Changeable idle feed restriction for better performance Outlasts and outperforms die-cast blocks!Race purple color.
Manufacturer: PROFORM
SKU: 10101-2009462

CHROME-PLATED ULTIMATE BULL BAR™ Totally retooled—provides a tighter, more customized fit with increased ground clearance Complete with integral stainless steel skid plate featuring laser-cut Westin® logo Heavy-duty 3" diameter tubular hoop and cross bar—stainless steel tubing Custom fit—designed to enhance the contours of your truck. black molded end capsfor a finished look. Features 2 auxiliary light holes (lights not included). Easy, no-drill installation. Please note: Installation may obstruct front license plate.
SKU: 10101-2009776

Check out this must have from Bestop! This new Soundbar is a great addition to any stereo system. Attaches with heavy-duty U bolts to the center hoop of any 2.5" rollbar in a CJ-7 or Wrangler. The Deluxe model soundbar is packed with a weather resistant pair of 3-way SonyX-plod 6.5" 135 watt speakers. This model includes two overhead map lights and can be adjusted to three different listening positions. Available in factory match fabric colors (gray, black denim, dark tan and spice). For CJ-7's & Wranglers.
SKU: 14019 117
Category: Miscellaneous

V-8 ENGINE REBUILD DVD The ideal interactive "how-to" tutorial to help novice enthusiasts and advanced home mechanics Step-by-step guide from preparation to assembly and installation to start-up 3-D computer models show the relationships and orientations of the inner workings of most V-8s Over 3 hours of footage from a collection of professional workbooks, factory shop manuals and industry professionals. Uses several GM small-block motorsas examples. Includes reference menus with a glossary and specialty tools instruction. DVD format allows you to watch and learn in the order you want at you own pace. Includes workbook to record all rebuild data and provide the order of events for your project. 8-step interactive DVD shows you how to rebuild a V-8 engine! Step 1—Preparation Step 2—Removal Step 3—Disassembly Step 4—Machining Step 5—Preassembly Step 6—Final assembly Step 7—Installation Step 8—Start up
SKU: 10101-2009992

"Get the latest technology and save $ with the streamlined Beltronics RX55 radar detector. The RX55, is packed with some of the hottest RX65 features at price that leavesplenty of room in the budget."
Manufacturer: Beltronics
SKU: 294
Category: Automotive Accessories. Radar Detectors

STEEL QUARTER PANEL Strong, specially-formed 20-gauge steel, coated to resist rust Panel fits over or replaces existing panel Restores original look and structural integrity Eliminates rust holes to help keep vehicle's interior and trunk cleaner and dryer. Designed to look like a professional installation. Extends from door opening to back of quarter panel and up to meet body lines. Extends a minimum of 7" above wheel openings (depending on application). Trimming of panel may be required to installfender skirts. Easy bolt-on, rivet-on or weld-on installation (depending on application). Some drilling required. SW=Station Wagon. Shipped separately from factory. NOTE: SKU numbers ending in FE are factory shipped by freight truck.
SKU: 10101-2000530

WRIST WATCH WITH A BIKER FLAIR Brushed stainless steel case anddouble-locking band Top-quality timepiece with something extra: high-resolution color graphics Face is 3-dimensional, high-relief embossed metal with brilliant enamel details Scratch-resistant mineral glass crystal with unidirectional rotating bezel. Dependable quartz movement. Luminous hour, minute and second hands. Water resistant to 100 feet. Long-life battery included.
SKU: 10101-2009352

Bridgestone Potenza RE750 Tire priced from $86.00 to $224.00. The Bridgestone Potenza RE750 is an Ultra High Performance summer tire that was developed for the drivers of sports cars and sporty coupes to provide traction on wet and dry roads. It uses Bridgestone's UNI-T network of technologies to improve three primary factors of the tire's performance: the bead, casing and tread compound.The Potenza RE750, inspired by the Bridgestone Potenza racing tire, uses an ultra high performance tread compound to enhance dry traction while its directional tread pattern enhances wet traction. Together, the tread compound and tread design help sweep water away from between the tire's contact patch and the road to improve wet grip(earning the highest "AA" UTQG Traction Rating) and reducing the possibility of hydroplaning. The Potenza RE750 has been engineered to reduce road noise, especially when worn, by combining interconnected shoulder blocks with continuous circumferential ribs in the center of the tread ...
Manufacturer: Bridgestone
SKU: Bridgestone Potenza RE750 Tire
Category: Automotive Parts and Accessories Parts Tires

5-PC. CHROME-PLATED STEEL LIGHT GRILLE SET FOR SADDLEBAGS 2 side grilles and 2 wraparound grilles fit over rear light panels and one center grille to fit under license plate panel between saddlebags Fits over bothlights and reflectors on saddlebags Mounts with self-adhesive backing.
Manufacturer: MC Enterprises
SKU: 10101-2006613

WINDSHIELD WIPER LINKAGE KIT Replacing your windshield frame? Don't forget to replace the wiper linkage, too! Designedto fit CJ frame and wiper motor exactly for smooth, trouble-free operation.
Manufacturer: Crown Automotive
SKU: 10101-2002002

MUD FLAPS 24" wide x 19" because big Duallies need big mud flaps like these! Stop road debris and water from billowing up behind you, getting yourrear rocker panels dirty and possibly blinding other drivers Big-time protection that's easy to install For trucks with dual rear wheels. Set of 2.
Manufacturer: Go Industries
SKU: 10101-2009501

LIFT SUPPORTS - GAS-CHARGED REPLACEMENTS For American and Imported cars & vans Meet or exceed OEM requirements Attach easily with existing mounts and hardware Chrome-plated hardened steel piston rods with corrosion-resistant support tubing restore smooth and easy lift action. Harmless nitrogen gas keeps piston rods under constant pressure. All supports are for rear applicationsexcept for those specified for hood (noted below).
Manufacturer: Strong Arm
SKU: 10101-2002992

AERODYNAMIC SUN VISORKeeps interior cooler, reduces glare and helps prevent interior fading Choose lighted or standard unlighted sun visor For pickups, vans and SUVs Rugged fiberglass construction. Blends right into vehicle's lines and contours. Smooth gel-coat finish can be easily painted to match or contrast vehicle color. Twin ducts channel airflow for reduced wind drag and better performance. Extend 6" to 8" to maximize protection. Standard or lighted visor with 5 flush-mount clearance lights for increased nighttime visibility. Chromed trim caps conceal fasteners. Easy installation. Some drilling required. Includes hardware and instructions. Will not fit vans with raised roof. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Go Industries
SKU: 10101-2004950

SATIN STAINLESS STEEL HOOD VENT Exciting new satin finish featuring professionally-etched 304 stainless steel Replaces factory-made hood vent Some drilling may be required A great alternative to ordinarypolished stainless steel. Rustproof, distinctive looking satin-finished accessory built to last. Hardware has same great finish. Get the newest, hottest look for your Jeep®.
SKU: 10101-2006553

LEATHER VESTS Absolutely no effort is spared—the most comfortable vest you've ever worn! Smooth, supple, top-grain cowhide vests feature expert tailoring and detailing throughout Stop the wind, resist abrasion and simply look great Rugged, premium leather, durable stitching and more!   Order Men's Chest Ladies'Size   S 38-40 6-8 M 40-42 10-12 L 44-46 14-16 XL 48-50 16-18  
Manufacturer: Carr
SKU: 10101-2000109

REPLACEMENT HARDWAREFOR BAJA BUMPERS Replacement hardware for all 1-1/2" tube bumpers Solid steel construction
Manufacturer: EMPI
SKU: 10101-2004766

SAE AIR IMPACT SOCKET SETS Choice of Standard orDeep Well Sets Heavy-duty 6-pt. sockets for use with air-powered impact wrenches to speed installation and removal of nuts, bolts and studs 1/2" drive sockets Made of drop-forged and heat-treated chrome vanadium steel—the finest tool steel available Beveled nose for easy on and off. Holes for locking pin in drive tang. Black oxide finish. Sets include sockets and storage tray or box. Limited lifetime warranty.
Manufacturer: MIT
SKU: 10101-2007657

REPLACEMENT EXTENSION BOLT Replaces bolt for dual wheel full-size adapters Shipped separately from factory. NOTE: SKU numbers ending in F are factory shippedand may take a little longer to reach you.
Manufacturer: Ricka
SKU: 10101-2003968

REBUILDING A VOLKSWAGEN AIR-COOLED ENGINE MANUAL This manual includes details on how to troubleshoot, tear down, inspect, assemble and install your engine. Also contains a parts-interchange section. Covers all '61-on Bug, Bus, Karmann Ghia, Thing, Type III, TypeIV and Porsche 914 engines. More than 500 photos and drawings. Includes easy-to-understand instructions.
SKU: 10101-2006753

BUMPER GUARDS Custom-fit guards give your truck superstyling and super protection with an easy, no-drill installation! 3 strong 4" diameter oval crossbars feature black powder-coated frame-mounted rubber-lined upright supports (add to the great look while providing extra protection for the push bumper) 2 predrilled light-tab holes let you mount your off-road lights (not included, sold separately) high up and away from brush and obstacles Limited lifetime warranty on stainless steel. Limited 5-year warranty on black steel. Approximately 41" high. NOTE: SKU numbers ending in E are freight shipped from JC Whitney warehouse by truck/air freight.
Manufacturer: MAAP or Mid America
SKU: 10101-2009418

REAR RUNNER BERBER CARPET MATS Custom-fit, tightly-woven, heavy 42-oz. nylon yarn—plush and crush resistant Traps dirt and moisture better than conventional mats Color-matched serged edges Nibbed backing for asure grip—no slippage. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2007313

This pullover isa classic sweatshirt that you can live in! Rich cotton is beefy and warm. The elastic wrists and waistband to keep out the spring wind. Perfect for layering to stay warm. The soft and cozy material makes this a year round winner. Same cool logo as the popular Since 1941 Tee shirt.
SKU: 15159 85
Category: Miscellaneous

BBS RK Silver Painted Wheels priced from $234.00 to $378.00. BBS RK Silver Painted Wheels.
Manufacturer: BBS
SKU: BBS RK Silver Painted Wheels
Category: Automotive Parts and Accessories Parts Wheels

JACK AND ACCESSORIES Lightweight and easy to maneuver Versatile enough to be used for lifting or winching 4,660 lbs. rated lift capacity Built to ANSI specifications of top-quality cast and stamped steel. 28square inch base resists sinking into soft ground. Factory tested before shipment. 2-piece handle included. Additional accessories sold separately.
Manufacturer: Hi-Lift
SKU: 10101-2008235

Warrior has come up with a serious collection of body armor for those who demand tough protection withoutthe "flash" of diamond plate. The 12 Gauge Steel panels are made of HRP&O (Hot rolled, pickled, and oiled) steel and are black powder coated to prevent rust and corrosion.
SKU: 12536 502
Category: Miscellaneous

SIDE WINGS For Honda GL1100 Interstate™ and Aspencade® fairings, and Honda GL1200 Interstate™, Aspendcade®, Limited Edition® and SEi® fairings Strong 1/8" thick acrylic wings help deflect wind Windshields sold separately Approx. 2-3/4"W x 11-1/4"Lat widest part. Mount with chromed brackets—drilling of windshield required. Sold in pairs.
SKU: 10101-2004515

GARRISON SERIES™ TRAILER TONGUE STORAGE BOXES Safe and secure extra storage space for ropes, batteries, tools and other gear Polished diamond-plate aluminum—strong, good looking, rust resistant Heavy-duty closed-cell gasket forms a tight waterproof, weatherproof sealUse that "wasted" space on your trailer's tongue to safely carry your travel necessities. Locking stainless steel paddle latch with adjustable striker assembly. Boxes mount easily on the trailer frame. Hinged overlapping lid. 2 keys included. Limited one-year warranty.
Manufacturer: Owens Products
SKU: 10101-2007185

ADVENTURE NETTING Attaches easily to all Safari Doors (sold separately) so you can experience the rush of riding without being closed in by doors Adds to the fun of your travels while preventing gear from fallingout over rough terrain Black heavy-duty polyester cord Sold in pairs.
Manufacturer: Olympic 4X4 Products
SKU: 10101-2002055

Bridgestone Insignia SE200 Tire priced from $54.00 to $71.00.
Manufacturer: Bridgestone
SKU: Bridgestone Insignia SE200 Tire
Category: Automotive Parts and Accessories Parts Tires

STAINLESSSTEEL HOSE CLAMP RETAINING STRAPS Great for catalytic converter heat shields 12-7/8" long with 2-1/2" to 12-1/2" range
SKU: 10101-2008032

STAINLESS STEEL GRILLE INSERTS Custom-fit inferno design—a "hot" look for the front of your truck! NeveRust™ heavy-gauge stainless steel Insert clamps easily over existing grille—no drilling, cutting or removal of any components Paintedinserts feature premium automotive-grade paint, clear coated for long life. Stainless steel hardware and hex key (the only tool needed to install) included. Manufacturer's limited lifetime warranty.
Manufacturer: Putco
SKU: 10101-2004856

STANDARD RV COVERSHeavy-duty, water-resistant polypropylene prevents condensation! Lightweight and breathable Elasticized corners and tie-down rope (rope included) make for a tight fit—won't blow away Slips easily over vehicle to protect against the Sun's damaging UV rays, airborne pollutants, tree sap, smog, snow and ice. Folds compactly and stores in its own bag (bag included). Fits class "A" mini motor homes, travel trailers and 5th wheels up to 42 feet long. Approximately 103"W x 108"H. Gray. To order: Measure the length of your vehicle excluding bumpers and order appropriate size.
SKU: 10101-2010112

Treat you Jeep Wrangler or CJ to a brand new top with one of these economical kits by Bestop. See again through crystal-clear windows, or the new tinted window version. Replacement tops are designed to fit like a glove over the factory original top and door hardware. Installation is quick and easy. Just cut off the old and slip on the new. Factory-match colors assure that "showroom new" look. Tops are now available with Sun-Block windows for the three rear windows, instead of the standard clear windows. Door skins and all windows (zip-in for Wrangler) are included in all Replace-a-Top models.Please note that Bestop Replace-a-Tops will ONLY fit over the original top and door frames which were supplied with the vehicle new. If in doubt as to the origin of your topand door frames, please use our "LivePerson" customer service to contact one of our representatives or call toll free to speak to our customer service at 1-800-745-6037 (US and Canada) or 610-701-3336 for international customers. Original Top Replacement Tops are manufactured by Bestop to the same exact OEM standards as the tops they make for major manufacturers. ** Door Skins also available separately.**
SKU: 11139 17
Category: Miscellaneous

SOLID COLOR SHORTY HELMETS WITH VISOR AND REMOVABLE STORM CURTAIN Great looking and always a favorite—helps prevent that "closed in" feeling, easy to wear and minimizes wind drag Refer to HELMET SIZING CHART B (see below) Dual-port forehead air vents allow flow-through ventilation A JC Whitney™ Exclusive! Interior is lined with stylish soft, black brushed nylonvelour. Removable wraparound storm curtain zips on or off helmet easily as needed to help protect your neck from the elements. Fully-padded curtain features soft-touch leather-like black vinyl outer covering and a soft lining to match helmet interiors. Extra-thick padding at the front of the curtain wraps around the bottom for additional comfort. Vinyl straps (sewn onto the outer vinyl curtain covering) help hold the open-ear harness-style chin-strap retention system in place. Snap-on black bubble visor looks great and helps shield eyes from the sun. Aerodynamic, balanced design for comfort without high-speed wobble. One-piece injection-molded thermoplastic outer shell is shock and penetration resistant. Contoured-to-fit and foam-padded one-piece expanded polystyrene inner shell helps reduce impacts, improves comfort and contributes to the great fit. Fingertip-adjustable venting allows you to control air circulation and airflow inside helmet for comfort and to speed up perspiration/moisture evaporation. Deluxe tailored-to-fit comfort liner provides the ultimate fit and comfort. The full-surround lining wraps around and fits up and against the front, sides and back of head and features special sizing darts sewn throughout the lining (not just at one or two points) and a specially-padded crown section to ensure a snug yet very comfortable fit. Lining is tailored from a soft, hypoallergenic and breathable microfiber black nylon that is both sweat resistant and moisture absorbent. Strong black nylon chin straps with chromed metal "D" rings, black base/window trim, black air vents and full-face helmets side pods (white air vents and side pods on white helmets). Meet or exceed DOT specifications. IMPORTANT NOTE: Click on HELMET SIZING CHART link for helmet sizing information.
SKU: 10101-2000171

JACK REAR SUPPORT PLATE Repair rusted and dented plate with this perfect-fit, die-formed and shaped plate Heavy-gauge primer-coated steel prohibits rust Fits '54-79 Volkswagen Beetles and Super Beetles Fits driver's and passenger's side. Installs easily with screws, by welding or by riveting (welder or rivetgun not included). Finish with epoxy filler (sold separately) and paint.
SKU: 10101-2000418

CUSTOM ACCENT EMBLEMS Emblems mount to any flat surface with self-adhesive backing Self-stick backing adheres to metal, plastic and fiberglass Superbly detailed castmetal emblems add sparkle and style to any cycle!
SKU: 10101-2006679