FENDER FLARE KIT - 6-PIECE SET @ Automotive online store

6-PIECE FENDER FLARE KIT Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may takea little longer to reach you.
SKU: 10101-2008761

4-IN-1 VENTED FULL-FACE PAINTED HELMET 4-way venting system for no-sweat riding comfort Refer to HELMET SIZING CHART B (see below) Like having 4 great helmets for one low price! 4-way venting system for no-sweat riding comfort includes: fingertip-adjustable forehead vents; adjustable front chin-bar vent; mold-in chin-bar side vents (3 per side) with mesh backing; molded-in rear exhaust vents (one per side). Shock/penetration-resistant injection-molded thermoplastic outer shell with one-piece helmet/chin-bar design for strength plus large window for unobstructed peripheral vision. Contoured, foam-padded expanded polystyrene inner shell helps reduce impacts, improves comfort and minimizes high-speed wobble. Soft perforated gray nylon lining. Chin bar has molded-in upper wind deflector/mouth guard and is fully padded and lined with black vinyl. Padded neck roll has comfortable black vinyl lower panel. Extra padding in cheek area. Painted Finish. Outer shell is sanded smooth, then painted with high-gloss paint. Tough clear polyurethane top coat prevents scratches and ensures easy soap and water cleanups. Choose from 3 solid colors or a black or white helmet with multicolored graphics. Visor. Plastic visor bolts onto helmet. 5 air scoops minimize lift. Black and red helmets include black visor, white helmet has white. Face Shield. Clear, optical-quality molded polycarbonate shield has left-side finger tab for effortless positioning. Multi-position ratchet mechanism is concealed by either the sides of the visor or by the included side pods (when visor is not used). Side pods are black for black and red helmets, white for white helmet. Black nylon chin strap includes side panels to reduce irritation andchromed "D" rings. Black base trim. Helmet meets or exceeds DOT specifications. Replacement face shield, visor (including mounting screws) and side pods (including mounting screws) sold separately. IMPORTANT NOTE: Click on HELMET SIZING CHART link for helmet sizing information.
SKU: 10101-2000134

Locking differentials have been available for years,but were always a compromise; performing well either off the road or on the road - but not on both. The ARB Air Locker provides normal differential action on the street - maintaining safe, predictable handling. An ARB Air Locker differential will drive out of most difficult situations. Easy-to-follow installation instructions are included in the kit. ARB air lockers are covered by a 12 Month or 12,00 mile limited warranty.
SKU: 16100 209
Category: Miscellaneous

HEADER-BACK EXHAUST KIT Add some muscle to your classic muscle car! Choose from 2-1/2" or 3", 16-gauge, mandrel bent, steel tubing Easy bolt-on construction—no weldingrequired Bolts to most long-tube header designs with 3" collectors. Available with or without performance muffler. One-year warranty. Kit includes all clamps, hangers, hardware and instructions.
SKU: 10101-2010448

"WAAG Center Guard Grill Guards' world-class design and precision engineering deliver styling thatenhances and accentuates the lines of your vehicle. Grill Guards Ship Free. Easy, bolt-on installation"
Manufacturer: WAAG
SKU: 77
Category: Automotive.Accessories.Car Covers

OIL FILLER CAP Quality made from CNC-machined billet aluminum Adds eye-catching style to your engine compartment!O-ring included for a leakproof seal.
Manufacturer: Mr. Gasket
SKU: 10101-2005335

EXTRA-HIGH EXTRA-WIDE WRAPAROUND WINDSHIELD For '99-2000 Honda GL1500 Valkyrie Interstate™ models Strong, shatter-resistant optically-clear 3/16" thick Lucite® acrylic with smooth chamfered edges Customsized to deflect wind better for greater riding comfort Follows the shape and contour of original but is 2-1/2" higher and wraps around an additional 4" on each side. Predrilled for easy installation using existing hardware. Meets or exceeds DOT specifications. Instructions included. Cannot be shipped express.
SKU: 10101-2000657

AIR FILTERS Specially treated paper element traps dirt and abrasives to let engine breathe more efficiently Easy to install filter replaces original For Honda, Kawasaki,Suzuki and Yamaha models Engine breathes more efficiently, restoring lost power and gas economy.
SKU: 10101-2002763

Our durable stainless steel bed rails will customize your truck while protecting bed caps from dents and scratches. The patented stake pocket attachment system will ensure a sturdy hold for tie-downs. Installs in stake pockets withoutdrilling.
SKU: 73017 503
Category: Miscellaneous

MAGNETIC SUPPRESSION IGNITION WIRE SET Not a carbon conductor—real metal wires with low DC resistance deliver 4 times more energy to the spark plugs Set features OEMatch™ wire lengths and boot configurations custom fit for your vehicle Stainless steel, double-lock ring terminal and patented core crimp terminal—core feedsdirectly into terminal at plug The world's most advanced magnetic suppression wire also features superior suppression of radio static (RFI) and high-temperature silicone jacket. Limited lifetime warranty.
Manufacturer: MSW
SKU: 10101-2009531

ACTIVE SUSPENSION KIT Dramatically improves stability…adds up to one ton of load capacity! Minimizes wear on tires, shocks and leaf springs 2 variable-rate coils designed to automatically aid rear leaf springs come into operation when needed—the more strain on leaf spring, the more Roadmaster aids suspension. Stops sway and reduces body roll on corners. Lifting force is appliedto the side, countering the downward force during body roll. Helps keep truck closer to level in a turns. Easy bolt-on installation. Note: Do not exceed gross vehicle rating of truck. Cannot be used on vehicles with factory overload springs.
Manufacturer: Roadmaster Suspension
SKU: 10101-2005972

Goodyear Eagle GA Tire priced from $56.00 to $239.00. The Goodyear Eagle GA is the touring radial that combines luxury with performance. As a "touring" radial, it complements the world's finest touring sedans with a clean, crisp, predictable road feel while delivering a smooth, quiet, comfortable ride. Large footprint contact with the road assures stable driving traction. Wide-and-low profile, aggressive dual-design shoulder rib, and wide center ribs produce a sophicatedlook that is the perfect match for today's performance sedans. Some sizes are not allseason rated and the tread pattern may vary according to size and speedrating.
Manufacturer: Goodyear
SKU: Goodyear Eagle GA Tire
Category: Automotive Parts and Accessories Parts Tires

MILES-PER-GALLON GAUGE For all cars, trucks, vans and RVs Miles-per-gallon scale shows actual gas mileage as you drive Easy to install on or under dash Slash your fuel costswith this easy-to-read illuminated fuel economy-performance gauge. Color-coded zones tell you when your engine is producing the most power for the least gas. Approx. 3-1/2” diam. face. With mounting housing. Complete with Operating/Installation Manual.
Manufacturer: Make Waves Instrument
SKU: 10101-2008961

SEAM SEALER Rubberizedsealer stays flexible Resists shrinkage Won't crack Brushes easily onto painted and bare surfaces. Gray. One-quart.
Manufacturer: Bondo
SKU: 10101-2000716

KYB Conversion/Adaptor Kitpriced from $13.00 to $87.00.
Manufacturer: KYB
SKU: KYB Conversion/Adaptor Kit
Category: Automotive Parts and Accessories Parts Suspension

Great for picnickers and campers. These storage bags zip shut and have handy external pockets for quick access. Each bag quickly attaches to the roll bar braces with rugged hook and loop straps. Color coordinates with all accessories with factory matched colors. Models for '80-'86 CJs and '87-'91 Wranglers are sold in pairs. The larger saddle bag for '92-'95 Wranglers has a convenient shoulder strap for carrying and is sold as a single unit.
SKU: 14045 15
Category: Miscellaneous

Supertop! The name says it all. And it's loaded with state-of-the-art features. All Supertops come equipped with a patented track installation system. This eliminates snaps and give a continuous clean-looking weather tight seal. Supertops fold down on your Jeep without removal from the top frame and all of the hardware stays on the Jeep. No loose parts to get lost. Premium features include:Click-Shut two piece doors with flat paddle type handles, removable (and replaceable) windows, black powder coated aluminum and steel hardware.Each Supertop kit is complete with every piece of hardware that you need. Most hardware is factory pre-assembled to cut down on installation time. Nothing to extra to buy. Also has EZ Open tailgate hardware (for Wrangler and CJ7). VHS installation video is included with Supertops for use on vehicles up to 1995. Supertops are available for all Jeeps from 1955 to 2000 in a great selection of factory matched colors. (See additional pictures for additional information)
SKU: 31002 05
Category: Miscellaneous

CHROME-PLATED HIGH-OUTPUT IGNITION COIL Delivers up to 40,000 volts…ensures faster starting andbetter overall performance Chrome-plated coil is oil filled to keep windings cool and provide peak performance at all engine speeds For all '67-78 12-volt air-cooled Volkswagens
SKU: 10101-2005113

POWER INVERTER CABLE KIT Lets you hardwire your inverter to vehicle's battery quickly, easily and safely 6-ft. long cables with eyeconnectors included except 51-8900A is 5-ft. Works with an inverter with terminal posts for eyelets
SKU: 10101-2001673

KC HiLITES™ 6" ROUND SLIMLITE® 130-WATT HALOGEN LIGHT KITS Unbeatable for illumination and looks! Super ice blue lighting! Stunning titanium color! Deliver an amazing 300,000 candlepower Stone Guard protects any 6-inch round halogen light.6" round titanium-color steel housing includes 130-Watt H3 bulb. Precision-ground optical glass lenses maximize light projection and clarity while the polished, prefocused reflectors ensure tight beam control. Kits include 2 auxiliary lights, relay-style wiring harness (preterminated to ensure easy hookup), illuminated KC™ switch, mounting hardware and instructions. Manufacturer's 23-year warranty.
Manufacturer: KC Hilites
SKU: 10101-2003761

CHROME-PLATED RECTANGULAR MIRROR Fully adjustable head, fit driver'sor passenger's side. 3-1/2" x 5-3/4" head.
Manufacturer: Automan
SKU: 10101-2008319

Dunlop Grandtrek SJ6 Tire priced from $95.00 to$107.00.
Manufacturer: Dunlop
SKU: Dunlop Grandtrek SJ6 Tire
Category: Automotive Parts and Accessories Parts Tires

CHEVROLET BILLET-STYLE CAST ALUMINUM WATER NECK KIT Ball-mill design—a definite difference from the all-chrome crowd! Heavy-duty billet-style cast aluminum, high-speed polished to a brilliant luster Limited one-year warranty "O" ring mounting for a no-leak operation. Hardware and "O" ring included.(D) Swivels 360°.
SKU: 10101-2000911

FIBERGLASS TAILGATE Strong yet lightweight fiberglass Replace original parts on Jeep® vehicles perfectly Reinforced at all edges and stress points Withstand off-road punishment. Bolt-on installation. Some drilling required. Some surface prep required before painting. Mounting hardware not included. Include instructions. Cannot be shipped express. NOTE: SKU numbers ending inF are factory shipped and may take a little longer to reach you. SKU numbers ending in FE are factory shipped by freight truck.
SKU: 10101-2004665

MASTER CYLINDER COVERS Custom-look chromed covers available for different size covers and reservoirs It is important to measure before ordering For General Motors, Ford and Chrysler product cars and trucks All replace original cover perfectly, except rectangular covers for late-model General Motors cars and trucks. Rubber gasket not included. For GM master cylinders with equal reservoirs and single bail clip. 2-3/8" x 5". For GM master cylinders with unequal reservoirs and single bail clip. 3" x 5-5/8". For GM master cylinderswith equal reservoirs and dual bail clip. 3" x 5-3/4". For late-model GM cars and trucks with rectangular covers. Available in 3-1/2" x 6" or 4-1/2" x 6-7/8". For Ford, Lincoln, Mercury cars and trucks with 2-3/4" x 5-3/4" cover. For Chrysler, Dodge and Plymouth cars and trucks with 3-1/4" x 6-1/8" cover.
SKU: 10101-2008436

STAINLESS STEELEXHAUST TIP Beautifully crafted chromed T304 stainless steel tip with big 4" diameter. outlets For use with aluminized super-turbo exhaust system (sold separately) Approximately 10"L overall. 2-1/2"ID. Can be welded on or clamped on (clamp not included). 2 required.
SKU: 10101-2009701

CUSTOM WINDSHIELD Customize your H-D® with our most popular shield—offers a large area of protectionLightly tinted Approximately 19"W x 18-1/2"H to 20-1/2"H Billet trim (SKU# 01ZX2208W) sold separately.
SKU: 10101-2000707

AUXILIARY 2-LITER MOTORCYCLE FUEL TANK Durable translucent polyethylene tank Kit includes screw-on cap, hanger, 4 ft. of 1/4"neoprene fuel line and petcock with 1/4" ends Provides fuel after your gas tank has been removed during multiple carburetor synchronization
Manufacturer: Motion Pro
SKU: 10101-2004173

UTILITYBOX LID Textured black high-impact polyethylene lid installs easily Keeps stored gear clean and dry
SKU: 10101-2009388

MINI BULLET MARKER LIGHTS Elongated (2-1/2"L x 1-1/4" diameter) bullet housing is showroom chrome plated and features 7 evenly spaced ball-milled-style accents for added appeal Use as auxiliary turn signals, marker lights or running lights to accent fairing,saddlebags, travel trunk, fenders, etc. 2 red and 2 amber lenses to allow use either on front or rear included Rounded plastic lens extends light approximately 3/8". red and amber lenses, replaceable 12-volt double-filament bulbs, color-coded pigtail wire connections, threaded hollow mounting stems that are removable for easier installation and mounting hardware included. Drilling required. Sold in pairs only. Replacement bulbs sold separately (SKU# 01ZX4764W).
SKU: 10101-2003399

BESTOP® FUEL DOOR for 97-05 Wrangler Available in super-tough black powder coat finish or stunning brushed aluminum finish Not just another fuel door—features lasting function, durability and looks Bestop® quality and engineering throughout—corrosion resistant for years of smooth, trouble-free operation Machined from solid 6063 T-6 aviation-quality billet aluminum—there is no equal! The ultimate! Easy, no-drill installation. Use existing mounting pointsand OEM hardware.
Manufacturer: Bestop
SKU: 10101-2009751

CUSTOM-FIT CLASS II RECEIVER HITCH For cars, trucks, SUVs and vans Revolutionary rust-resistant finish exceeds 500-hour spray-testing?that's equal to 5 winters! Custom designed for each vehicle for easy bolt-on installation and better fit 3,500-lb. GTW (Gross Towing Weight), 300-lb. tongue weight. Custom designed for easy bolt-on installation. Steel drawbar secures directly to vehicle's frame, removes instantly to improve appearance and prevent bruised shins. Small 1-1/4" receiver opening is virtually invisible when drawbar is removed. Built-in wiring bracket arm. Meet or exceed SAE standards. Includes removable ball mount, pin and clip, receiver tube cover, hardware and instructions. Do not exceed rated tow capacity of towing vehicle. Limited lifetime warranty. How To Order Trailer Hitches. Determine the Gross Towing Weight (GTW) and tongue weight (TW) of your trailer. The GTW is the weight of the trailer fully loaded and ready for towing. The TW is the downward push exerted on the hitch ball by the trailer coupler. Check your owner's manual to find the maximum GTW and TW for your vehicle. Important: Do not tow the trailer if either the GTW or the TW exceeds the towing vehicle'smaximum towing capacity. Order ball, ball mount and wiring connectors separately. Wire code letters indicate the connectors or converters that are recommended for the Class II hitch. Other accessories that may complete your desired towing package: ball mount; trailer ball; pin and clip; receiver tube cover; hitch lock; safety chain; bike carrier; taillight connector; plug-in T-connector; taillight converter; brake controller; weight distribution; sway control; hitch light; transmission cooler. Wire Code Letters P Power isolation converter is required C Standard converter is required W 4-wire connector is required T T-connector harness with necessary built-in converter or power converter may be available (plugs directly into your vehicle's wiring harness) Order all converters and connectors separately.
Manufacturer: Hidden Hitch
SKU: 10101-2009925

These tough and durable floor liners offer the warmth and comfort of a carpeted floor mat with the four season protection of a molded floor mat. Formed for a precision fit with a raised ridge to corral dirt or spilled liquid. These liners will protect your carpet area from dirt, mud, snow and water. Easy to clean due to ScotchGard Protection. Available for front, rear and cargo area.
SKU: 14170 301
Category: Miscellaneous

VOLTAGE REDUCERS Use your radio, spotlight, heater, air conditioner—any 6- or 12-volt accessory—in your 12- or 24-volt negative-ground vehicle. Compact unit installs easily—just 3 wires to hook up. Voltage is reduced automatically. For 12-volt systems using 6-volt accessories: model with 6- and 8-amp terminals; one with 10- and 20-amp terminals. For 24-volt systems using 12-volt accessories:with 2-, 3- and 4-amp terminals.
SKU: 10101-2001694

VANTAGE™ MEN'S JACKET Water-resistant polymer shell with 1050-denier ballistic nylon panels plus the waterproof Reissa® liner—it's designed to keep you comfortable no matter what the weather Features a zip-out waterproof quilted thermal liner to lock out the cold and wet Performance and style! Fully loaded with all the bells and whistles! Includes 3 front zippered cargo pockets and 2 inside storage/wallet pockets. Reissa® waterproof yet breathable laminated membrane liner to keep you warmer plus a Mossi™ Climate Control Technology System that allows jacket to cool throughout while keeping uncomfortable drafts at bay. Incorporates removable CE-approved safety "armor" in the shoulders and elbows plus an EVA impact pad in the spine area for impact resistance…and driving peace of mind. Premium-quality YKK® zippers throughout. Reflective piping on the collar aids in after-dark visibility and safety. Also features reflective panels on the arms. Adjustable hook/loop waist belt ensures a snug fit plus kidney support. There's even an inner connecting zipper than can be hooked up to our Module™ pants (sold separately) to create a one-piece suit! HOW TO ORDER Follow the instructions below using a tape measure to take all measurements (for greatest accuracy, measurements should be taken by someone other than yourself). Find the size in Size Chart that best fits your measurements. JACKET Chest Size. Measure across the fullest part of chest, keeping tape tight and level. Waist Size. Measure around that point on your waist where you wear your belt. Sleeve Length. With your arm hanging relaxed (and slightly bent) at your side, measure from the back of the neck over the top of shoulder and then down the outside of the arm to the wrist bone. IMPORTANT NOTE. This jacket has extra length built into the sleeve. Do not compensate forextra sleeve length; simply use the actual length measured. Vantage™ Jacket Size S M L XL XXL XXXL Chest 40 42 44 46 48 50 Waist 38 40 42 44 46 48 Sleeve 32 32-1/2 33-3/4 34-1/2 35-1/2 36
SKU: 10101-2000083

DRILL BIT SHARPENER REPLACEMENT GRINDING STONES Package of 2 stones for 5/16" to 5/8" (8-16mm) sharpeners.
SKU: 10101-2008012

This rear seat not only folds and tumbles to give you more cargo room, but its bottom is covered with weatherproof carpets so it looks better doing it. Built on the beefy Atlas Frame, it comes with floor mounts and rear lock-down brackets. The fabric and stitch pattern of the TrailMax Fold & Tumble rear seat will complement any of the front seats in the TrailMax line. Available in color-matched vinyl or vinyl with fabric fronts (cooler in summer,warmer in the winter). Comes fully assembledand includes mounting hardware.
SKU: 24279 15
Category: Miscellaneous

NONSLIP CARGO MAT Stops stored gear from sliding around and getting scratched or scuffed Ideal anywhere you want nonslip protection—tool box, van interior, boat, RV, shop, drawers…you name it! Great in car trunk, truck bed or SUV cargo areaԵprevents damage to vehicle Extra-large 3 x 4-ft. mat can be easilycut with scissors to desired size. Tough, lightweight polyurethane material incorporates special shock-absorbing foam and features a molded-in nonslip weave pattern.
Manufacturer: Pacer Performance
SKU: 10101-2007460

H-Sport Comp. Camber Plates priced from $446.00 to$449.00. The Sport and Competition Front Camber Plate Sets are designed for OE diameter springs and allow for camber adjustment. The H-Sport Blue anodized billet aluminum cap is doughnut-shaped for easy access to adjustable struts. The bearing section does not uti
Manufacturer: H-Sport
SKU: H-Sport Comp. Camber Plates
Category: Automotive Parts and Accessories Parts Suspension

Another version of the overwhelmingfavorite! These vibrant Garment Dyed Tees are comfortable & stylish. Available in Navy, Orange and Olive.
SKU: 15151 26
Category: Miscellaneous

BUMPER GUARDS WEATHERSTRIPPING OEM quality Easy to install Shipped separatelyfrom factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Metro Molded Parts
SKU: 10101-2000255

INNER DOOR HANDLES AND CAPS Original-equipment style. Order two caps per handle. Shipped separately from factory. NOTE: SKU numbers ending inF are factory shipped and may take a little longer to reach you.
SKU: 10101-2003291

HARDTOP SEAL KIT Great for sealing leaks along windshield or blocking noise, drafts Includes everything needed to repair or replaceseals around one top Includes special loop seal for windshield, extra-thick hard rubber gasket for body tub (holds top away from tub to help prevent abrasion), soft mastic strips to seal area behind windshield, hole-cutting die plus liquid rubber repair compound.
SKU: 10101-2008729

VENT-TECH 2-PIECE RAINSUIT Stay dry and comfortable…even when the weather turns wet and nasty 3/4-length jacket with high-waisted pants Venting system lets air in to keep you cooler, while keeping rain out All the features you want at a great low price! Durable, lightweight nylon with waterproof coating. JACKET: 2 waist-high double-fold Velcro® pockets; rain hood that zips into collar; waterproof front and back vents; elasticized waist for a snug fit; Velcro® wrist seal with soft neoprene lining to keep out moisture; reflective safety stripes on sleeves make you visible to others; soft corduroy collar with full-front zipper and Velcro® closure. PANTS: 1-1/8" removable suspenders keep pants in place while riding; zipperedlegs with stirrups to prevent flapping. SIZE CHART Size Jacket (Chest) Pants (Waist) XS 30/32 24/26 S 34/36 28/30 M 38/40 32/34 L 42/44 36/38 XL 46/48 40/42 XXL 50/52 44/46 XXXL 54/56 48+
Manufacturer: Pro Sport
SKU: 10101-2009971

TUBELESS TIRE REPAIR GUN KIT VULCANIZING PLUGS 3/8" package of 25
SKU: 10101-2004018

WINDSHIELD ADJUSTMENT KNOB Shipped separately from factory.NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2003040

"CRUZ" SHORTY HALF-HELMET WITH BOLT-ON VISOR A JC Whitney™ exclusive! Refer to VR-1 HELMET SIZING CHART A (see below) Thermoplastic shellis lightweight without sacrificing strength Comfortable plush interior offers additional shock-absorption. Impact resistant helmet with stainless steel rivets. Goggle strap holder and D-ring retention system. High-quality paint finish resists marks and scuffing. Meets or exceeds DOT standards. IMPORTANT NOTE: Click on VR-1 HELMET SIZING CHART link for helmet sizing information.
Manufacturer: VR-1
SKU: 10101-2009742

CUSTOM-STYLED PAINTED CRUISER HELMET Special dual-textured interior makes this one of the most comfortablehelmets Refer to HELMET SIZING CHART B (see below) The smooth design, the outer shell's turned-out rear flip plus the black bolt-on mini visor make this one of the sleekest helmets you've ever seen! You'll like wearing this helmet! Black dual-textured lining plus "custom" stitching. There's a mesh upper crown panel that improves airflow and circulation for hot-weather comfort and accelerated moisture/perspiration evaporation. There are also soft, brushed, solid lower wraparound panels that are very easy on the head. The helmet's "head-tailored" interior is custom sewn throughout for one of the best fits possible. Cushioned neck roll contributes to the overall great feel. Open-ear-harness retention system helps ensure unimpaired hearing and helps prevent that "closed-in" sensation. This padded and enclosed harness features a black liner (matches the lower helmet interior) plus a black leather-look vinyl cover for extra good looks. Aerodynamic one-piece injection-molded thermoplastic outer shell is shock and penetration resistant. Contoured-to-fit, foam-padded one-piece expanded polystyrene inner shell helps reduce impacts, improves comfort and minimizes high-speed wobble. Outer shell is sanded smooth and painted. Tough clear polyurethane or acrylic top coat protects and adds extra shine to high-gloss finish…the flat black finish is protected by a special flat acrylic top coat that resists mars, scuffs and oily fingerprints. Easy soap and water cleanups. Bolt-on (not snap-on) visor for added strength. Padded neck roll means extra comfort. Black nylon chin strap includes metal "D" rings. Black base trim. Meets or exceeds DOT specifications. Replacement visor sold separately. IMPORTANT NOTE: Click on HELMET SIZING CHART link for helmet sizing information.
SKU: 10101-2000167

These tough and durable floor liners offer the warmthand comfort of a carpeted floor mat with the four season protection of a molded floor mat. Formed for a precision fit with a raised ridge to corral dirt or spilled liquid. These liners will protect your carpet area from dirt, mud, snow and water. Easy to clean due to Scotchgard® protection. Custom fit designs hold mats firmly in place. Available for front, rear and cargo area. Choose from the three or four piece sets & save big!
SKU: 74154 719
Category: Miscellaneous

REMOTE STARTER INSTALLATION T-HARNESS Plugs directly into vehicle's wiring system…reduces the installation time of your Valiant™ remote starter up to 60%! Eliminatesmost wire cutting and splicing For use on all Valiant™ starters and keyless entry systems with starter.
Manufacturer: Valiant
SKU: 10101-2010311

PROFESSIONAL 3-ARM HUB PULLER For5-, 6-, 7- or 8-hole bolt circles from 3" to 7" diameter Hardened steel pulling screw Simplifies removal of rear hub and drum…a must when pulling a wheel! 3/4" square head adjusts easily with wrench. Slide hammer attachment sold separately. Includes special wrench to turn screw. Pulling strength: 56,000 psi. Gear puller arms sold separately.
Manufacturer: Springfield Wheel Puller
SKU: 10101-2007847

FRONT AND REAR NONASBESTOS DISC BRAKE PAD SETS For motorcycles Low-friction pad materials reduce rotor wear and brake squeal Bonded-on brake materials can't shear or separate from steel backing Pads are certified in compliance with the Vehicle Equipment Safety Commission Regulation V-3 by the American Association of Motor Vehicle Administrators (AAMVA). Sold in sets of 2 pads only (one set will do one rotor/caliper). For cycles with 2 front rotors and calipers, order 2 sets. (A) Frontwheels for Yamaha models require 2 different sets (one for the left side, one for the right side).
SKU: 10101-2008468

WINDSHIELD COWL RUBBER WEATHERSTRIP Seals between windshield frame and body cowl Replaces worn or cracked originals perfectly on Jeep® vehicles Restores proper defroster airflowon 1976-on models.
Manufacturer: Omix Ada
SKU: 10101-2008596

WINDOW BANNER Perforated 8 mil PVC film allows an unobstructed view from inside the vehicle Trim to fit any size rear window Easily applies withpressure sensitive adhesive Complete window coverage.
Manufacturer: Adrians Inc.
SKU: 10101-2010286

Protect your seats or cover those unsightly rips with these slip-on seat covers. Easy to install, these comfortable and stylish seat covers will keep your seats cool in summer and warm inwinter. Will fit over any standard Jeep® seat, including our replacement seats.
SKU: 14270 309
Category: Miscellaneous

TIMING COVER WITH SEAL Shipped separately fromfactory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2005309

SIDE ARMOR Durable over-built 2" x .120" wall powder coat paintedsteel construction Dual "girder" system for underside protection Rugged, one-piece fully welded design for extra strength For your Jeep® Wrangler including Unlimited. 1/4" thick custom mounting brackets. Sold in pairs.
Manufacturer: Smittybilt
SKU: 10101-2010103

ENGINE MANAGEMENT SYSTEM Plugs directly into your car's factory ECU harness and sensors Windows™-based software (2000, NT, 98, 95, ME) makes copying, viewing and manipulating data as easy as clicking a mouse User-defined templates are easy to configure and let you establish "quick keys" to any vital information during the tuning process Plug and play systeminstalls in minutes and requires no additional wiring. Revolutionary! Forever changes the way fuel injection is tuned! Infinitely-adjustable software lets you program virtually any combination of engine control, power adders or auxiliary devices and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition. Other features include: onboard data logging; sequential fuel injection; nitrous, boost and knock control. System also includes base maps and user-friendly manual. Made in USA. System is legal in California for off-road use only.
Manufacturer: AEM
SKU: 10101-2005190

LO-RIDER™ AVENGER CARBURETOR Exclusive No Trouble™ 0ne-piece Lo-Rider™ vent tube eliminates fuel spillover during extreme maneuvers H.V.S. annular boosters provide an ultra high vacuum signal for incredible low and mid range throttle response and torque Chrome fuel bowls, vibratory polished mainbody and gold hardware for awesome looks! Designed exclusively for the extreme lowrider enthusiast to eliminate stumbling, flooding and stalling during high angle hydraulic maneuvers. The Holley® Lo-Rider™Avenger is the only carburetor designed to address the rigors of radical lowriders. Featuring exclusive No Trouble™ metering block to eliminate fuel spillover through the boosters at extreme angles. Flood-free "nose-up" hydraulic maneuvers up to 40°, 30° during side maneuvers and "nose-down" maneuvers. No Trouble™ electric choke ensures great cold starting. Factory pre-set, easily adjustable and designed to prevent accidental over-adjustment. 4 vacuum ports: PCV, spark, power brake and vacuum accessories for easy installation. Externally adjustable, No Trouble™ spring-loaded needle and seats provide stable fuel levels for improved fuel control under all conditions. For use with any carbureted lowrider car or truck with bore 4bbl. intake. Recommended for engines 280+ ci with no more than 400 horsepower.br
Manufacturer: Holley
SKU: 10101-2010222

JEEP® OWNER'S MANUAL A reproduction of your original owner's manual Essential when repairing, restoring ormaintaining your Jeep®
Manufacturer: Omix Ada
SKU: 10101-2006798

R134-A HIGH MILEAGE PRODUCTS WITH STOP LEAK Formulated to improve performance in older automotive air conditioner Rejuvenates worn air conditioning parts and system seals to stop refrigerant leaks Dissolves carbon and forms a protective film to decrease friction for longer service life of all moving parts Significantly reduces compressor noise as well as extends compressor life. Protects against future wear. Comparableto ID HMR-134. Note: Not for sale in Wisconsin.
SKU: 10101-2002896

5" HIGH-SPEED SANDER Lightweight pistol grip body provides excellentcontrol for touch-up sanding Aluminum die-cast body with built-in air regulator for speed control Ball bearing motor 16,000 RPM motor with 60 psi. 4 CFM. 1/4" NPT air inlet for 3/8" hose. 3 sanding pads (3", 4-1/2", 5-1/2"), retainer and cross bar wrench included.
Manufacturer: MIT
SKU: 10101-2007674

INNER ROCKER PANEL FRONT DOOR Available for driver's orpassenger's side Easy screw-on, weld-on or rivet-on installation (welder or rivet gun not included) Panel is made of die-formed steel and shaped to match original contours. Designed to repair the worst cases of rust. Cannot be shipped express.
SKU: 10101-2009796

HUNTING BLIND Features 5 zippered gun ports including one in the roof for goose and duck hunting Reliable protection while you're enjoying the ATV lifestyle Attaches easily to the front and rear racks of any ATV Remains attached for highway trailering (can be removed as needed). Easy setup in seconds—simply zip open the travel pouch and the blind telescopes open into a roomy 58" x 82"H x 58" enclosure. Sets off to the side of the ATV to keep out dangerous gasoline fumes. Push the buttons inside the blind and it can befolded right back into its travel pouch. Water/weather-resistant heavy-duty material. Adjustable/telescoping tubular steel framework. Allows partial use of your racks for storage bags, rifles, etc. One entry door. Mossy Oak® Break-Up™ Camo color. Not for use with a heater.
Manufacturer: ATV Cabs
SKU: 10101-2009386

We have all of the necessary accessories to make your installation and use of the new winch complete. Each Winch requires a mount plate, and a hardware kit appropriate for the year of your vehicle. Wealso have fairlead covers, and full covers. Don't forget the essential pulley blocks, chains and recovery straps!
SKU: 92141 400
Category: Miscellaneous