MINI EXHAUSTONATOR @ Automotive online store

MINI EXHAUSTONATOR™ Enhances fuel combustion and restores original engine horsepower for maximum fuel efficiency Reduces HC, CO and NO (each amount will vary dependingon application) to help vehicle pass emission testing Reduces carbon residue for a cleaner, cooler running engine Stainless steel construction. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Mini Exhaustonator
SKU: 10101-2006283

TIGHT TUCK HEADER Engineered for street rods and hot rods Solves many problems associated with engine swaps Manufactured from durable 16-gauge tubing Clears all stock motor mounts. Fits the tightest engine compartments. Includes all mounting hardware and gaskets. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer toreach you.
Manufacturer: PATRIOT
SKU: 10101-2006356

STAINLESS STEEL PERFORMANCE CAT-BACK EXHAUST SYSTEM KIT Corrosion-resistant T304 stainless steel for one-time installation 50-state legal system delivers power in the under-5,000 RPM range—where actual street, highway and off-road driving takes place Produces a deep, throaty sound outside at the tailpipe, not inside the cab Big 3" diameter tailpipes (except where noted) Polished stainless steel tips included Improves acceleration, passing and pulling power as well as hill-climbing towing power. The only system heavy duty enough for off-road use. Up to 20 extra HP (at rear wheels); up to 30 ft./lbs. more torque. Top-grade, heavy-duty tubing is mandrel bent to maintain inside diameters, ensuring unrestricted exhaust flow. Fully welded muffler is custom tuned to your specific truck. System runs from stock catalytic converter to tailpipe. Follows original-equipment routing and attaches easily to existing mounting points. Side-exit location makes thisthe best system if you pull a trailer. Kit includes connector pipe, muffler, tailpipe, tip and hardware. Manufacturer's limited lifetime warranty. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Gibson Performance Exhaust
SKU: 10101-2006425

REMOTE ALARM SYSTEM Radar sensor detects body movement inside your vehicle! Switch-sensing system detects unauthorized attempts to open doors, etc. Dual-stage shock sensor with built-in warn-away "listens" for impacts to body (sensitivity is adjustable) Radar sensor detects any object with mass (arm, hand, etc.) reaching into the protected area Programmable anti-carjacking feature helps prevent theft Completely expandable with outputs for keyless entry, power trunk release, starter kit, dome light activation, horn honk (require relay sold separately) Some alarms protect the outside of your vehicle. This alarm is designed to protect your vehicle's outside as well as its vulnerable interior! It's the best choice for convertible and Jeep® owners. You can arm/disarm system with the remote transmitter (two 4-button transmitters with OE-look icons included). Or you can wire system to arm/disarm automatically with the ignition. System features code-learning microprocessor receiver and security digital coding. When triggered, 125dB siren blasts and parking lights flash for one minute—system automatically rearms. The multifunction LED, siren chirp and parking lights flash confirm various alarm functions. Chirp may be muted or deleted. RF safety lockout. A violated/malfunctioning sensor will be bypassed while the functioning sensors continue to protect vehicle. All-sensor bypass and shock-sensor-only bypass can be turned on or off using the transmitter. Transmitter canbe used to trigger siren instantly (panic feature). Valet control switch. Negative trigger output allows easy addition of an optional sensor. Got a question? Call 1-800-624-0500 or log onto www.icdynamics.com for assistance. Sorry, your order cannot be placed on this number or at this address.
Manufacturer: Valiant
SKU: 10101-2001370

High strength 4340 aircraft alloy steel axles for up front. These are designed to withstand U-joint failures that usually destroy standard shafts. Original equipment axle shaft yoke areas are not heat-treated but these are & will retain their shape when the U-joint breaks. It will accept a standard c-clip or full-circle retaining ring. '82-'86 CJ 27 spline & spicer 297X U- joint. An outer axle must also be purchased #23151.50 because the U- joint size of the high strength units accepts only a spicer 297X U- joint which need to be bought at the dealership.
SKU: 26131 02
Category: Miscellaneous

8-PIECE BLACK OXIDE SOCKET SET For star-shaped bolts on many late model cars Drilled and broached black oxide finish alloy steel Socket holder included Set includes 7 sizes: E6, E7, E8 with 1/4" drive; E10, E12, E14, E16with 3/8" drive.
Manufacturer: Lisle
SKU: 10101-2007792

RECHARGER FILTER CARE KIT 6-step maintenance system makes air filter perform like new Includes 6-1/2 oz. sprayoil, 12-oz. filter cleaner and service decal Restores maximum airflow efficiency to replacement Filtercharger® air filters
Manufacturer: K&N
SKU: 10101-2005554

"Tal & Hadas' European-StyleCenter Guard Grill Guard with optional Skid Plate protects the entire front and underside of your vehicle, in a uniquely bold and stylish way. Grill Guards Ship Free"
Manufacturer: Tal & Hadas
SKU: 84
Category: Automotive.Accessories.Grille Guards

AT Italia S5 Silver Painted Wheels priced from $99.00 to $239.00. AT Italia S5 Silver Painted Wheels.
Manufacturer: AT+Italia
SKU: AT Italia S5 Silver Painted Wheels
Category: Automotive Parts and Accessories Parts Wheels

RIVET NUT AND THREAD-SERT TOOL KITS Choose complete rivet nut and thread-sert kit or 3-in-1 rivet/rivet nut/thread-sert tool kit Easy, economical alternatives to riveting! CHOICE OF FASTENERS Rivet Nuts. Most cost-effective way to place permanent threads in thin materials! Perfect for metal, fiberglass and rigid plastic which are too thin to support a threaded screw or bolt with the rivet nut. No drilling out rivets to remove fasteners! Drill a hole in panel or wall, thread rivet nut on mandrel of installation tool and insert into hole. Squeezing handle expands the rear of the rivet nut and locks it in place—ready for insertion ofmachine screw. Large diameter head allows use in soft materials with little thread strength and to provide the most bearing surface. Threading resists high loads, prevents loosening under vibration. Look neat. Thread-Serts. Best for use with thin or thick materials! Ideal for use in any material at least 3/32" thick. Eliminate need for tapping and welding. Thread-Serts feature an upper sleeve and a base, both with internal and external threads. During installation, base is drawn upwards inside the sleeve, forcing 360° contact between sleeve and application material. Easy—all you need is installation tool and drilled or punched hole.
Manufacturer: Marson
SKU: 10101-2008058

5-PIECE CAB MOUNT TEARDROP-SHAPED CHROME RUNNING LIGHTS Die-cast metal housing, amber lens Mount easily on curved or flat roofs. Maximum visibility with the flick of aswitch—control panel with on/off switch and indicator light included. Bulbs are replaceable. 2-1/2"W x 2-1/2"H x 8"L. Set draws only 3-1/2 amps. Easy to install—drilling required. Includes 5 lights, wiring harness, neoprene gaskets to prevent leaks, hardware and instructions.
Manufacturer: Pacer Performance
SKU: 10101-2003372

CUSTOM-FIT WINDOW SEALS FOR CLASSIC VW Help restore original look and eliminate leaks, rattlesand wind whistles Custom formed and molded to match originals perfectly Replace old and deteriorated weatherstripping and parts easily. Ozone-resistant, high-quality EPDM black rubber. (A) Smooth California look—no trim groove.
Manufacturer: West Coast Metric
SKU: 10101-2008672

EVOLUTION™ COVER Super savings! You'll get all-weather protection and save $45 PLUS get a FREE cable and lock! Made with Block-It™ Fabric by Kimberly-Clark featuring moisture resistant and impact absorbent 4-layer polypropylene construction Protects vehicle's finish from nicks, scratches and dings better than any other cover fabric 2 middle layers lock out most airborne dust and pollution. Fabric fibers won't absorb moisture so it dries faster. Air can circulate freely providing the ultimate in breathability. Follows the exact lines for a body-hugging fit. Cover protects all the body panels and extends down the sides to cover the tires. May include mirror pockets to help hold the cover in place…even in windy situations. Mirror pockets may not be included on older models with dealer-installed mirrors. Features overlapped seams with double-needle stitching, neoprene elastic in front and rear hems for the snuggest fit possibleand reinforced, non-scratch grommet for trouble-free tie-down. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Covercraft
SKU: 10105-2010875

X-CROSS STRUT BAR Ties all the most rigid points of the chassis together to eliminate body roll Strong yet lightweight billet 7075 aluminum construction CNC-machined TIG-welded mounts with show-qualitypolished finish Perfect for road and drag racing! One-year warranty.
Manufacturer: WEAPON-R
SKU: 10101-2009932

HARDTOP DOOR WEATHERSTRIPPING Seals between rear door and body Replaces worn or crackedoriginal perfectly on Jeep® vehicles
Manufacturer: Metro Molded Parts
SKU: 10101-2008660

REPLACEMENT FUEL PUMP Great for replacing worn or damaged originals For Jeep®models with 134 4-cylinder engine
SKU: 10101-2005615

AT Italia9 Razze Stainless Face w/Black Accent Wheels priced from $279.00 to $359.00. AT Italia 9 Razze Stainless Face w/Black Accent Wheels.
Manufacturer: AT+Italia
SKU: AT Italia 9 Razze Stainless Face w/Black Accent Wheels
Category: Automotive Parts and Accessories Parts Wheels

RANCH HAND TRUCKER SEATS Western styled seat made for those who appreciate western look and feel Each seat slides back and forth on its own track Embossed with hand tooled look Features: 40/20/40 trucker; high back that reclines and tilts forward; tubular frame with no-sag suspension; body-contoured foam padding; console conceals a lined storage/beverage compartment. Center console flips up to form a third seat. Bolt-in installation—no drilling. Limited 3-year warranty. Shipped separately from factory in5 cartons that may arrive separately. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. IMPORTANT NOTE: You will receive the required mounting brackets and hardware at no additional cost. Allow seats to be directly bolted into your vehicle.
Manufacturer: Qualitex
SKU: 10101-2010343

PITMAN ARM WEDGE Made of drop-forged alloy steel, heat-treated for long and rough use Removes Pitman arm from Pitman shaft on cars and light trucks Professional-quality, hand-held tool specially designed for font-end work Wedge opening is 1-1/8". 10"L. Knurled for secure grip.Fast and easy. Just hit tool with hammer to force wedge between parts.
Manufacturer: American Presto
SKU: 10101-2004161

"Finally, a way to reach thoseimpossible crevices between your dash and windshield! Perfect for accessing hard-to-reach areas of your dash. 100% cotton, lightly treated with paraffin wax. 14"" length"
Manufacturer: Cal Car Cover
Category: Automotive.Accessories.Car Care Products

GOJAK® 6000 VEHICLE-POSITIONING JACK Lifts vehicles without touching frame! Load ratings: 1,500 lbs. per jack, 6,000 lbs per 4-jackset Lifts tires up to 13" wide Effortless mobility—rolls easily in any direction! 2 jacks permit full 180° vehicle pivot…4 jacks place vehicle on 360° rolling platform. Moves totally disabled vehicle in tightest areas. No need for electrical power, hydraulic elements or compressed air. Non-marring, easy-roll industrial nylon caster wheels with heavy-duty bearings. Choice of 1,250 and 1,500 lbs. load rating per jack. Easy foot-pedal lifting. Double-pawl bi-directional ratchet lift tires between 2 rollers…smoothly raises vehicle in just seconds. Roller touches tire only. Rigid steel frame. Polyester powder-coat finish. Built-in carry handle per 4-jack set. Weighs approximately 38 lbs. Two 5" heavy-duty outer wheels, two 4" heavy-duty inner wheels. Limited one-year warranty. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2008307

A good 1" body lift is often the answer to the common oversized tire rub problem. Daystar combines the popular 1" body lift with polyurethane. These are not body puck spacers that you use with your conventional mounts. Longer polyurethane bushings replace the mushy factory rubber bushings to provideless body roll over conventional body lifts. Kits also include longer zinc plated bolts and body washers. The nice thing about a body lift is that it will not compromise the vehicles handling and ride characteristics. Limited Lifetime Warranty. Available in black, red or yellow.
SKU: 16053 221
Category: Miscellaneous

PLAYING CARDS WITH SKULL AND HANDS BELT Black-dyed heavy-duty stud-accented leather end sections decorated with chrome-plated 5/16" diameter flat-top studs Chrome-plated removable metal buckle and keepers Chrome-plated middle links feature playing cards (ace and king ofspades with raised skull in the center) being held by 2 skeletal hands and reinforced belt tip Measure waist where belt is normally worn (over pants). Then order the corresponding size. If waist is between size ranges, order the next larger size belt.
SKU: 10101-2000023

Yokohama Geolandar H/T-S G053 Tire priced from $94.00 to $107.00. The Yokohama Geolandar H/T-S family of Highway All-Season sport utility vehicle,pickup truck and van tires are designed to provide a combination of comfort, handling and year round traction, even in light snow. The Geolandar H/T-S family features three different All-Season tread patterns (Yokohama's G051, G052 and G053 designs) and three different internal constructions, tuned to meet three different modes of driving. Depending on the tire size selected, Geolandar H/T-S tires address the needs of light duty on-road driving (G051), make a statement for the drivers who want attention-grabbing looks (G052), or deal with the heavy loads that require Load Range E tires (G053).The Yokohama Geolandar H/T-S (G051, G052 and G053) family of Highway All-Season light truck tires each specialized for a different type of light truck use.Geolandar H/T-S G053 tires are available in heavy-duty Load Range E (10-ply rated) sizes for 1-ton pickup trucks, ...
Manufacturer: Yokohama
SKU: Yokohama Geolandar H/T-S G053 Tire
Category: Automotive Parts and Accessories Parts Tires

CUSTOM-FIT SPOTLIGHT BARS AND SPOTLIGHTS Extra custom styling and greater visibility for your cycle! Chrome-plated spotlight bar, housing assembly and mounting clamp all soldseparately For Honda Shadows
SKU: 10101-2003448

NONFLAMMABLEFLEXIBLE PLASTIC DIP COATING Water-based acrylic material dries to the consistency of plastic Protects virtually any surface Prevents rust and corrosion, insulates against heat and cold and adds gripping power Ideal for tool handles. Stays flexible in subzero temperatures and resists heat to 200° F. Won't chip or peel. Lasts years.
SKU: 10101-2000733

CHROME-PLATED FAIRING-NOSE TRIMA bright custom touch for the front of your fairing! Chromed one-piece ABS plastic trim replaces your color-matched original easily Mounts like original using your existing hardware Complements Windshield-garnish Accent (sold separately).
SKU: 10101-2000611

CHROME-PLATED WRAPAROUND SEAT ACCENT RAILS Save 50% ! Custom-fit decorative rail, beautifully chrome-plated, adds attention-getting good looks For Honda, Kawasaki, Suzuki and Yamaha cruisers Strong 5/8" diameter steel tubing bolts on easily at existing mounting points with existing hardware. Easy installation rail makes bike look like a winner. No modifications or drilling needed. One-piece wraparound rail wraps around the 2 sides and rear of passenger section.
Manufacturer: MC Enterprises
SKU: 10101-2009098

BILLET SOFT TOP QUICK DISCONNECTS Replace your factory bow attachments on your Jeep® Wrangler! Quick release pins allow for easy removal of original bow system Constructed of durable corrosion resistant aluminum for added strength and long life Set of4 Quick Disconnects for each bow mount.
Manufacturer: Outland
SKU: 10101-2010093

SATIN STAINLESS STEEL WINDSHIELD TIE DOWN KIT Exciting new satin finish featuring professionally-etched 304 stainless steel Bolts to existing holes Rustproof A great alternative to ordinary polished stainless steel. Distinctive looking satin-finished accessorybuilt to last. Hardware has same great finish. Get the newest, hottest look for your Jeep®.
SKU: 10101-2000519

FRONT-MOUNT INTERCOOLER KIT The easy, safe way to increase horsepower! Reduces engine's inlet temperature, allowing a denser air charge toenter engine to give you MORE POWER at the SAME BOOST LEVEL! Intercooler utilizes a properly-sized core plus tunes the internal core with a V-spec core to ensure maximum cooling, minimum pressure drops. Air-to-air, tube-and-fin design requires no specialized liquid plumbing. Core ends are capped with smooth flowing, heavy-duty cast aluminum end tanks. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Greddy
SKU: 10101-2005759

HIGH-PERFORMANCE DUAL EXHAUST Aluminized and mandrel-bent kit bolts to stock exhaust manifold…no welding! Reduces back pressure for more horsepower and improved efficiency and performance For Camaro, Firebird, Trans Am, Chevy II, Nova and Z-28 models Heavy-duty 16-gauge aluminized pipes are oversized 2-1/4"ODfor unrestricted exhaust flow. Tailpipes exit behind rear wheels. Replaces single or dual exhausts including transverse-mounted muffler systems. Includes 2 exhaust pipes, tailpipes, hangers, clamps, bolts and instructions. Mufflers not included. For '70-81 Camaros and Z-28s; '78-81 Firebirds and Trans Ams; '68-79 Novas and Chevy IIs. Fits vehicles with Chevrolet 283-400 small-block engines with 3-bolt flanged manifolds ONLY. Cannot be shipped express. Check local emission laws before ordering. NOTE: This product is intended for off-road or racing use only and is not intended or applicable for highway use. Not legal for sale or use on California pollution-controlled motor vehicles. Aluminized Turbo Muffler for Dual Exhaust. When used with high-performance dual exhaust kit, aluminized turbo mufflers provide better performance without sacrificing fuel economy. Order 2.
Manufacturer: Heartthrob Exhaust
SKU: 10101-2006406

These new rack and basket systems from Steel Horse are designed especially for Wrangler vehicles '87-'95 & '97-'00. The Easy Load Trail Rack is positioned above the spare tire & provides extra storage for up to 200 lbs. of camping gear, coolers or luggage. Constructed of durable powder coated steel tubing with reinforced weld points. The attractive and smooth styling makes this rack look as good as it performs. It features easy no-drill installation that allows you to mount the rack to existing factory holes. The natural companion for the Trail Rack is the Off Road Roof Basket.It is perfect for off-roading, camping or road trips. Use the easy no-drill mount brackets to attach the heavy duty basket to Wrangler vehicles. Constructed of highly durable and powder coated steel tubing with reinforced weld points, it provides over 15 cubic feet of additional storage. The basket is available by itself for use with your existing roof rack.
SKU: 12039 50
Category: Miscellaneous

MASTER CYLINDER FACE CLAMP Replace your dull original with a luster only chromed die-cast aluminum can create Mounts on original master cylinder with existing hardware Orderone for each master cylinder.
SKU: 10101-2008442

SIMPLEX® WATERPROOF 3-PIECE RAIN SUIT Top-quality, reliable rain protection for less than $15! Durable, waterproof PVC material Tear-resistant polymer weave backing Welded seams to lock out all moisture. Jacket features 2 front flap pockets, under-arm and rear exhaust vents (under yoke) to keep you comfortable, soft black corduroy-lined stand-up collar with hook/loop closure plus snap-off rain hood withdrawstring adjustment. Front includes 5 waterproof snaps, cuffs have plastic snap closure. Bib-style pants add an extra layer of protection over the front lower chest and waist. Pants also include adjustable shoulder straps, snap-close front fly and snap-close cuffs to seal your legs against the elements.
SKU: 10101-2000103

INFERNO HEADLIGHT COVERS Really hot—tough heavy-duty acrylic with head-turning red-to-yellow flames The perfect finishingtouch for our other flames accessories Custom molded for easy installation and a perfect fit No drilling required.
Manufacturer: EGR
SKU: 10101-2002092

PEDAL ASSEMBLY - REPLACEMENT Hard-to-find replacements for damaged brake and clutch pedals Restores original lookand feel Complete!
Manufacturer: EMPI
SKU: 10101-2003033

The security storage trunk is a great way to store valuables in yourJeep. Fits neatly between the rear wheel wells and behind the rear seat. Pry-Guard construction and tough continuous hinge provide outstanding security. Grade 8 installation hardware is standard included. Durable epoxy wrinkle finish available in black, gray or spice. Two pick-proof tubular locks are provided.
SKU: 14142 01
Category: Miscellaneous

ELECTRIC WIPER MOTORS Replaces stock vacuum motor perfectly Motor maintains a constant, even sweep of windshield for clearer and safer viewing Exact-fit motor (with mounting bracket) includes switch and wiring. 90° swing for maximum sweep. Order wiper arm and blade separately. For 6- or 12-volt negative-groundsystems only.
SKU: 10101-2002021

BRAIDED STAINLESS STEEL BRAKE LINES Kevlar® wrapped Teflon®, braided for strength and durability Pressure tested to 4000 PSI DOT approved Brake lines are a Teflon® tube wrapped in Kevlar® for strength, then a protective coating and then the stainless steel.Includes clips and o-rings. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Rough Country Suspension
SKU: 10101-2010445

The Mobile Desk allowsyou to stay productive on the road! Mobile Desk makes it happen by attaching to your passenger seat with a seatbelt. Comes with storage and a pull out writing surface.
Manufacturer: Go Office/Car Desk
SKU: 49
Category: Automotive.Accessories.Driving Gadgets

DUBSPIN BELLAGIO SPINNING WHEELS AND TIRE PACKAGE Top-quality cast-aluminum triple-chrome-plated wheels from MHT and licensed by Davin—makers of the original Spinning Wheel Specially-designed high-speed sealed bearing lets your Spinner keep on spinning long after you've stopped! Get looks wherever you go! Available in 22", 24" & 26" Rim Sizes for an additional cost Pirelli, Toyo, and Yokohama Tire packages also available Package includes4 wheels, 4 tires (mounted and balanced), caps, lug nuts and valve stems. Manufacturer's limited one-year warranty against chrome chipping or flaking. Warranty does not cover curb damage or accidents. Sorry, returns are allowed only if wheels have not been installed on vehicle or driven on. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2003833

Heat Your Beverage to the Perfect Temperature While You Drive. Then Keep It HotUp to Two Hours After You Leave the Car.
Manufacturer: Wagan Tech
SKU: 309
Category: Automotive Accessories. Driving Products

Complete Jeep tune-up kit. All you need to tune up your vehicle all in one box. Kits include: Oil Filter - OEM specifications (USA made), Air Filter - Premium Quality, Spark plug wire set - High performance suppression cable, Cap & Rotor - USA made, Spark plugs - Champion Brand and a Fuel filter.
SKU: 55126 014
Category: Miscellaneous

HOW TO RESTORE YOUR FARM TRACTOR Carefully illustrates every step in the restoration of 2 classic tractors explaining howeach step relates to your tractor Over 170 pages Easy-to-understand manual. Some makes covered: Farmall, Ford, John Deere, International Case, Allis-Chalmers, Minneapolis-Moline, Oliver, Chapters on selecting the right tractor, engine rebuilds (governors, magnetos, ignitions, electrical systems) PTQ overhauls (clutches, transmissions, differentials, hydraulics), fuel systems, carburetor rebuilds, painting/decorating techniques, wheels, tires, brakes, steering and cooling systems. One complete section is devoted to safe disposal and recycling of parts and chemicals plus helpful tips about protecting the environment. Lavishly illustrated.
Manufacturer: Motorbooks
SKU: 10101-2006776

VALVE COVER GASKETS Die-cut to fit precisely Seal engine tight for higher compression and leak-free performance! Specially molded composite rubber except on MLS cylinderhead gasket, which is reinforced, expanded metal with graphite lubricant. Valve cover gasket and one-pc. oil pan gasket feature built-in steel load-limiters to prevent overtightening and torque loss after installtaion.
Manufacturer: Mr. Gasket
SKU: 10101-2005511

SQUARE-SHAPEDWOOFERS Silver specially-treated polypropylene cone Wide rubber surround Black square steel basket Unique shape! Additional features include bumped and vanted extended pole piece; high-temperature Kapton voice coil; 4 ohm impedance; 70 + 70 oz. magnet structure.
SKU: 10101-2001310

COLD AIR INDUCTION SYSTEM One of the most advanced and productive cold-air induction systems available CNC mandrel-bent 6061 aluminum intake pipes are individually tuned in both length and diameter to maximize power Relocates filter outside of engine bay for cooler intake charge and more power over rpm range Creates MORE horsepower than every comparable intake system on the market, and is CARB certified! Exclusive one-piece filter is easy to install without the need for the inner fender well to be cut or modified in most applications. Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit every time! The filter charger element with built-in velocity stack is specially designed to create massive airflow capacity. Finished in Zirconia powdercoating to reduce heat penetration that cannot be achieved with other finishes. TIG-welded fittings and brackets. Includes complete installation hardware, comprehensive instructions, AEM decal and license plate frame.
Manufacturer: AEM
SKU: 10101-2005550

ILLUMINATED MECHANICAL VACUUM GAUGE Flashing indicator lights show only that systems are working. These 2"-diam. illuminated gauges give actual readings. Black dials, white numerals—choose chromed or black bezels. Chromed mounting panels include all fittings and instructions for 6 or12 volt. Kits: 4 gauge—ammeter, oil gauge, water temperature gauge, vacuum gauge; triple gauge (without vacuum gauge); dual gauge—ammeter and oil gauge; single gauge (any of 4).
Manufacturer: Equus
SKU: 10101-2008893

5-PIECE LIGHTED LUG WRENCH SET 1/2" drive adapter features a bright LED to illuminate nighttime emergency repairs Includes 4 of the most-popularsockets (17mm-11/16", 19mm-3/4", 21mm-13/16" and 19mm-3/4") Handle extends and locks from 14" to 21-1/2" to provide the extra leverage needed to remove stubborn rusty/corroded fasteners On/off LED switch with locking pin to prevent accidental illumination. Includes blow-molded storage case and batteries.
Manufacturer: Performance Tool
SKU: 10101-2004023

L 2 R™ FRONT AIR DAM Transform the front end of your truck with a dramatic eye-catching effect! Fits over existing body and bumper for easy installation Heavy duty ABS plastic construction Provides a finished look to street, custom and off-road trucks. Compact, 3-piece design includes 2 outer components constructed of smooth ABS polymer blend to reduce paint preparation time and minimize chipping. Center component is constructed of textured black, UV resistant, ABS and can be installed as is or painted to match vehicle. Can be primed andpainted after normal surface preparation. All necessary mounting hardware and instructions included. Light drilling required. Driving lights not included. Limited lifetime warranty. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Lund
SKU: 10101-2010066

PLASTICS WELDING KIT AND ACCESSORIES Welds ABS, polypropylene,polyethylene, PVC and thermoplastic polyurethane High-speed welding tip, replacement ceramic heating element, welding rod sets and welding rod assortment available separately No air compressor required. High-speed welding tip, replacement ceramic heating element, welding rod sets and welding rod assortment sold separately.
SKU: 10101-2007548

TRANSPARENT HOOD Astonishing! Lets everyone see all those terrific under-hood components Custom fit and individually hand made in the USA of the highest quality cast acrylic—won't warp or discolor like Plexiglassor ordinary acrylics Mounts easily to factory hinges—chrome-plated pins included to secure the front You've spent a lot of time and effort getting your engine "just right." Don't hide it! Show it off to the world! Lightweight—the typical hood weighs about 22 lbs. Easy to keep looking great. Minor scratches can be easily removed with the cleaning solution (included) and a damp cloth. Shipped separately from factory. NOTE: SKU numbers ending in FE are factory shipped by truck freight.
Manufacturer: Eurohood
SKU: 10101-2006533

CLARKE® 40-to 100-AMP ARC WELDER Welds mild steel up to 1/4" thick 30% to 100% duty cycle for longer continuous welding Operates on 110-V circuit, use with 1/16 thru 3/32 electrodes. Infinitely-adjustable amperage range allows precise control of the heat setting Heavy-duty components (transformers, resistors, etc.) maximize operating efficiency Moisture-proof impregnated insulation. Built-incutout prevents thermal overload. Leads are detachable for easy servicing, handling, and storage. Each unit is individually tested and operates on 20-amp AC single-phase circuit with approx. 5-1/2 ft. ground cable, 8-ft. electrode cable. Open circuit voltage: 48 volts. Convection-cooled transformer. Comes with hand-held face shield, electrode holder and work clamps with cables, wire brush, chipping hammer and operating instructions. Weighs approx. 32 lbs.
Manufacturer: Clarke Power Products
SKU: 10101-2007554

A nice addition to The California Brief and a Tonneau Cover. The Wind Breaker Curtain deflect air up and over the passenger area while reducing draft, noise and moisture. The clear plastic window allows excellent rear visibility. Installation is simple, because it attaches to your roll bar and the lower skirt connects to the tonneau cover. Available in gray, black or spice.
SKU: 11030 15
Category: Miscellaneous

Pirelli P4000 Super Touring Tire priced from $62.00 to $106.00. The P4000 SuperTouring gives you the legendary Pirelli performance with an exceptionally smooth ride and very quiet tire. The P4000 SuperTouring gives enough performance to satisfy all but the most aggressive driver, while maintaining its luxury oriented manners. Combined with the All-Season capabilty of the P4000 SuperTouring, this is a great replacement choice for many sports coupes andsedans. The P4000 also offers a 40,000 mile treadwear warranty.
Manufacturer: Pirelli
SKU: Pirelli P4000 Super Touring Tire
Category: Automotive Parts and Accessories Parts Tires

CAR COVER LOCK Protects car cover from being stolen Plastic-coated steel cable goes through grommets on both sides of cover, then secures with brass lock 2 keys included NOTE: SKU numbers ending inF are factory shipped and may take a little longer to reach you.
Manufacturer: Coverking
SKU: 10101-2004529

A great way to turn the inside of your tailgate into a handy swing-out storage bin. Constructed from rugged soft-top material this handy item features storage pockets. The organizer hangs from a mounting rail at the top and snaps to the tailgate at the bottom for quick installation and removal.
SKU: 14046 17
Category: Miscellaneous

7- LIGHT LIGHT BAR FOR TRAVEL-TRUNK RAILS Extra antenna relocation bracket can be purchased separately For '80-87 Honda GL1100 and GL1200 Aspencade® and Interstate™ models Approx. 3-1/2"H light bars adjust to fit and mount to the bottom rail of dress-up rails (sold separately). Easily visible top rail adds extra styling. Chromed steelalloy. Lights have combination red lens with reflector optics. Each prewired auxiliary marker light has 12-volt single-filament bulb. Meet or exceed DOT standards. Each light is approx. 2-1/4"H x 3-3/4"L. Includes hardware and instructions.
Manufacturer: MC Enterprises
SKU: 10101-2006609

The BlackMax Cover is a bold, all black tonneau with black rails and bows and the latest hi-tech components. Impressive leverlock attachment allows easy rail removal yet latches securely in place and will not vibrate loose. BlackMax's new snaps are reinforced nylon and will never break. BlackMax snaps also use Belleville spring technology to keep snaps in place for easy reattachment of your tarp, while allowing horizontal movement to minimize tarp stress. Extang's BlackMax also features snap opening on the cab rail for easy access into the front area ofyour truck bed. Reversible snaps are black for the cleanest look!
SKU: 71054 521
Category: Miscellaneous

Goodyear Wrangler F1Tire priced from $152.00 to $299.00.
Manufacturer: Goodyear
SKU: Goodyear Wrangler F1 Tire
Category: Automotive Parts and Accessories Parts Tires

ANTIQUE-STYLE HORN Motor-driven—roars like popular horns of the past! Genuine "OOO GAH" sound Genuine motor-driven horn, not an electric look-alike.Mounts easily in any engine compartment—approximately 4-1/4"H x 10"L. Durable steel housing and plastic bell. Uses existing horn button, wiring and relay (or purchase separately). Includes instructions and mounting stud. For all 12-volt vehicles.
Manufacturer: Wolo
SKU: 10101-2009071

5-PC. BRAKE TOOL SET Set includes brake shoe spring tool, brake shoe retaining spring tool, 13"L brake springpliers, brake adjusting spoon and high-offset brake bleeder wrench (sizes 3/8" and 7/16").
SKU: 10101-2004112

MONITOR MOUNTING KITS These kits let you easily mount any of our monitors on the headrest, sun visor or roof Also work with any other monitor with1/4" slide bracket groove on backside
SKU: 10101-2001642

OIL SUCTION GUN All purpose filling and draining unit Hycar plunger for positive forcing and suction. Has 1-pint capacity by volume. Oil and grease-resistant 11" flexible hosehas positive seal. Knurled barrel 11" long x 2-1/4" diameter.
SKU: 10101-2004282