SWIVEL-SEAL FITTINGS @ Automotive online store

SWIVEL-SEAL™ FITTINGS Aluminum alloy fittings meet or exceed minimums required for aerospace hose end specifications Patented cutting-edge design and developmentof competition plumbing! The leading supplier of top-quality products to professional racers around the world including Indy, Formula 1, NASCAR and NHRA For use with Earl's Auto-Flex™ braid-protected hoses only (hoses sold separately). Not intended for use on any other Earl's® hose. Use with other manufacturers' hose is not recommended. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. 1st Class Quality! Nobody exceeds the fluid flow capacity that Earl's® bent-tube hose ends offer. Original Swivel-Seal™ stainless retention pins allow 360° adjustment after installation. Earl's® original and exclusive dual-plane anti-seepage sealing system. Each hose end component is precision machined to exacting tolerances for trouble-free performance in the field. Nipple and cutter primary seal system stands unsurpassed in its sealing integrity—design has been aerospace proven for over 45 years and in competition for over 30 years!
SKU: 10101-2009583

Dunlop D65 T Touring Tire priced from $53.00 to $72.00. The D65 T Touring has a treadwear ratings from 480 to 560 - one of the industry's highest Uniform Tire Quality Grading for an "T" speed rated touring performance tire. That means it's built to last. But that's only half the story. It's also designed to deliver both gripping performance and long mileage. It's almost like two tires in one.The D65 T Touring is a true luxury touring radial...T rated for long lasting durability, excellent wet and dry handing and sure footed grip. Everythink you'd expect from a performance tire.The D65 T Touring is also available in the D65 T Touring Elite, which offers whitewall styling.At the same time, the all-season D65 T Touring delivers a smooth, quiet, comfortable ride - mile after mile. That's why Dunlop has backed it with a 6 year limited treadwear warranty.
Manufacturer: Dunlop
SKU: Dunlop D65 T Touring Tire
Category: Automotive Parts and Accessories Parts Tires

AUTO AIR CONDITIONING REPAIR MANUAL Includeslatest information and step-by-step troubleshooting procedures Covers theory, operation, all component controls, tests, diagnoses, servicing, tools, charts and specifications for all types of systems and automobiles. Covers retrofitting R12 to R134a systems plus ways to service new CFC Free R134a refrigerant. Contains test questions, answers. Up-to-date coverage of all compressors of Ford, GM, Chrysler, Diesel Kik/Zexel, Panasonic, HADSYS (Honda), Mausushita, Harrison, Tecumseh, Nippondenso, Frigidaire, York, Sanden (Sankyo) & Hitachi. Over 250 pages.
Manufacturer: Mastercool
SKU: 10101-2006748

REPLACEMENT WIRING HARNESS Complete—all the wiring you'll need in one money-saving timing-saving set! Exact OEM-style reproduction Designed to fit perfectly and look right—no taping, splicing or modifications required! Replaces old, frayed or damaged wiring—helps complete your Jeep® restoration.Includes cloth-covered wiring harness (except where noted). Will not fit Jeep Military models.
Manufacturer: Triplex Manufacturing
SKU: 10101-2001357

THE VOLKSWAGENBEETLE HISTORY GUIDE Chronicles the development and rise to worldwide popularity of the famed "punch buggy," invented in Germany in the 1930s Includes the makings of all models, engines and body styles through 1967—and the key people responsible for its development Written by Ryan Lee Price. 192 pages.
SKU: 10101-2006738

"Colgan's Sport Bra, constructed of tough, sleek Naugahyde coatedwith vinyl and lined with soft flannel, protects the vulnerable top front rounded section of the hood of your car. Price from $44.95."
Manufacturer: Colgan
SKU: 39
Category: Automotive.Accessories.Car Care Products

RECEIVER-HITCH-MOUNT RAMP SYSTEM Eliminates excessive weight on the tailgate when using ramps to load ATVs, lawn mowers, golf carts or motorcycles Ramps are supported by the Ramp-Rite™, reducing the chance of damaging thetailgate or tailgate support cables due to overloading Fits all Class III 2" receiver hitches A safe and easy way to use loading ramps! Here's how it works: (1) Insert the Ramp-Rite™ into your truck's 2" receiver hitch; (2) Adjust Ramp-Rite™ to extend just beyond the lowered tailgate; (3) Place ramps at desired width on the Ramp-Rite™ non-skid surface; (4) Secure ramps with cables or straps. 48" wide support can be positioned slightly lower than tailgate to reduce ramp incline for easier loading. Features 3 horizontal and 3 vertical adjustments to accommodate any pickup with a Class III hitch. When not needed, Ramp-Rite™ removes in seconds and stores flat. Ramps, cables and straps not included.
SKU: 10101-2004709

CARBURETOR SYNCHRONIZER KIT A must adjustment kit for top performance Accurately synchronizes each carburetor throttle plate on multi-carburetor enginesFor cycles with multi-carb engines (except Yamaha FZR models) Gauges are calibrated to measure 0-30" (0-760mm) Hg for vacuum and 0-9 psi (0-.63kg/cm2) for pressure. Includes 2-1/2" diam. gauges. For 2-, 3- or 4-carb cycles (except Yamaha FZR models). Includes 4 gauges and 4 controllable dampening valves.
SKU: 10101-2004169

Camshaft & lifter kit used for '65-'78 with 232 CI engine, '71-'76 with 258 CI engine, '77-'78 with 258 CI engine and 1 barrel carburetor, and '79-'80 with 258 CIengine, 2 barrel carburetor and manual transmission.
SKU: 51001 03
Category: Miscellaneous

No other spark plug provides more performance for the life of your vehicle's engine. SplitFire's patented "V" shaped electrode design is available with tree separate points of platinum, substantially reducing electrode wear. What's more, the revolutionary platinum-tipped fine wire center electrode requires less voltage tofire. No other spark plug combines 3 platinum alloy ponts. Electrode design causes the flame kernel to split upwards toward the combustion chamber to help improve combustion efficiency. For '72-'77 CJ w/258 or 232ci engines, or '72-'81 w/304 V8 engines.
SKU: 55114 001
Category: Miscellaneous

PERFORMANCE PISTONS Exceptional heat control for tighter clearances Premium pistons are made of aerospace-quality 4032 high-silicon forged aluminum Proven on track and street! Complete with matching ring sets, wrist pins and pin locks. Compression based onstock cc cylinder head chamber.
Manufacturer: ARIAS
SKU: 10101-2005220

REPLACEMENT FLOOR INSULATION TAR BOARDS For ‘46-79 Beetle and Super Beetle Restores interior while insulating floor area against noise, vibration, heat, etc. Precutto replace originals, fit perfectly. Mount on front and rear floor pans under carpeting, padding, etc. Rubber. Set of 4.
SKU: 10101-2002973

PIAA 1156 Xtreme White priced from $13.00. PIAA T6Xtreme White Replacement Bulbs priced from $13.
Manufacturer: PIAA
SKU: PIAA 1156 Xtreme White
Category: Automotive Parts and Accessories Parts Accessories

COMPETITION SERIES FOG LIGHTS Powerful 55-Watt H-3 bulbs burn brighter than conventional bulbs Compact for easy mounting even in the tightest spots(adjustable brackets included) Great looks plus brighter light at a terrific low price! Heavy-duty die-cast housing and glass lenses. 2 lights, brackets, complete wiring harness and on/off switch included.
Manufacturer: Optronics
SKU: 10101-2003750

POCKET ISLAND TOPPER Revolutionary built-in, zippered, mesh corner pockets A novel way to achieve additional storage space! Corner locations…out of the way yet close at hand! Shields front and rear passengers from the sun or rain for that open-air feeling. Includes additional storage using 2 corner pockets—a new and innovative design. With reinforced zippers, items remain secure even in severe weather conditions. Matching soft top color creates a clean, finished look. Windshield Channel/Header (sold separately)required for installation.
Manufacturer: Outland
SKU: 10101-2010087

AIR REVOLUTION One of the smallest and most powerful pumps available! Perfect for all kinds of tires (motorcycle, ATV, bicycle) and sporting equipment Only 3-1/2" diameter x 6"H closed—fitswhere larger pumps can't Features dual aluminum cylinders, 0-70 psi gauge, 32"L air hose, check valve adapter, Presta, taper and needle adapters. Zippered nylon storage/carry bag has room enough for a patch kit (not included). Weighs just 17 oz.
SKU: 10101-2007534

WINDBREAKER Deflects air up and over the front passenger area reducing wind draft, dust, noise, etc. Good visibility through clear plastic rear window Windbreaker attaches to roll bar with easy-to-install straps Weatherproof vinyl-coated polyester and cottondenim fabric provides long life and extra durability. Bottom "door" allows quick access to rear of vehicle. Limited 5-year warranty.
Manufacturer: Smittybilt
SKU: 10101-2000094

HORN INSTALLATION KIT For installing any 6-or 12-volt horn Includes chrome-plated horn button with black center and 10 feet of wire with end terminals
Manufacturer: Wolo
SKU: 10101-2009040

HAND-AIR-BRUSHED VINYL SIDE GRAPHICS The look of a custom paint job but without the high price! Includes two one-piece graphics—one for each side of your truck Easy to install wet or dry in just minutes Install the graphic as a single piece…or go creative—cut the graphic apart and install the pieces in a truly one-of-a-kind pattern! Heavy-duty, weather-resistant vinyl has been tested to last and look great for years in the harshest climates. Graphics are manufactured for permanentapplication, but they can be removed. Detailed installation instructions included. Click on item SKU# for additional information.
Manufacturer: Roge
SKU: 10101-2006556

WAAG's Rear Bumper Guard Grill Guards provide protection against low-speed impact and costly repairs. GrillGuards Ship Free.Installs in about thirty minutes with no drilling.
Manufacturer: WAAG
SKU: 79
Category: Automotive.Accessories.Grille Guards

CARBON FIBER REARHATCH Looks great and dramatically reduces car's overall weight Lightweight carbon fiber hatch completely replaces the heavy OE rear hatch Fiberglass reinforcement adds strength Use existing original glass or add a custom racing Plexiglas™ rear piece (not included) for an even greater weight decrease. Shipped separately from factory. NOTE: SKU numbers ending in FE are factory shipped by truck freight.
SKU: 10101-2001790

LS1/LS6 SHAFT-MOUNT ROLLER ROCKER ARM KIT 1.7 ration rocker arms can handle aggressivehydraulic or solid roller cams 6061 aluminum Requires a valve cover spacer for installation May require a custom pushrod—check rocker arm geometry. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Patriot Performance
SKU: 10101-2009539

FLEXIBLE REFLECTOR TABLE Makes it easierto spot any vehicle at greater distances Rated at over 600 candlepower per foot Sealed unbreakable 18" x 1-1/2"W strips are ultra-thin (only .012") for easy mounting on flat or curved surfaces. Industrial-strength adhesive backing assures secure installation. Easy to trim.
Manufacturer: Peterson
SKU: 10101-2006564

POWERSTAT™ PERFORMANCE THERMOSTAT Replaces factory thermostatwith no modifications It's 50-state legal when used with Hypertech® Power Tuning™ (sold separately) Induces less heat into air intake for added performance and horsepower gains Complete your performance package! PowerStat™ lets your engine run cooler, making more power and decreasing the engine's tendency to detonate under load.
Manufacturer: Hypertech
SKU: 10101-2000902

NEON SHIFT KNOB Beautiful by day, incomparable at night Makes your vehicle's interior glow with the shimmer of neon Ergonomically contouredto fit comfortably in your hand. Colored dome and recessed on/off button. Low amp draw. Fits 3/8" to 9/16" shifters. Can be installed permanently or using the plug-in adapter. Installation instructions and all necessary hardware included. Check local laws before ordering.
Manufacturer: Street Glow
SKU: 10101-2003080

ONE-PIECE FRONT CARPET MAT Fits perfectly for full front coverage including the transmission hump! Rugged polypropylene cut-pile carpeting is laminated to nibbed no-slip rubber backing Cloth-bound edges and heavy-duty vinyl heel pad. Locations for shift and 4WD levers marked for easy cutout (if required). Will not fit vehicles with console in front of seat. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take alittle longer to reach you. To receive a color fabric sample(s), call (877) 927-7427 and request the color(s) you would like.
Manufacturer: Newark Auto Products
SKU: 10101-2007288

REPLACEMENT WINDSHIELDS Don't ride with impaired visibility—replace your unsightly cracked, scratched or discolored windshield! Available in clear or bronze tint Strong 1/8" thick shatter-resistant acrylic with smooth chamfered edges. Perfect replacements—allshaped and sized like originals (except low-profile windshields, which are same width as standard windshields, but 3" shorter). Pre-drilled for trouble-free installation using original windshield hardware. Meet or exceed DOT specifications. Include instructions. For models with original windshields. Note: For your reference, Harley-Davidson® original equipment numbers are listed.
Manufacturer: Maier Mfg
SKU: 10101-2000711

3-PIECE COMPLETE ECONOMY 18OZ CARPET MAT SET FOR VANS Set includes one-piece front and "T" shaped rear matt withrunner to fit in front of third row Long-wearing, heavyweight, cut-pile 18-oz. poly carpet Nibbed backing keeps mats in place and prevents curling Affordable floor protection! No-ravel cloth-bound edges. Tailored to fit—no cutting or trimming. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2007323

PERFORMANCE CONTROL MODULE Improves horsepower by as much as 25% throughout 1000 to 5000-RPM power range! Enhances performance gains achieved from installation of an upgraded power chip Increases throttle response…reduces flat spots or delay time during sudden acceleration OBD II compatible Easy to install in 20 to 30 minutes with basic hand tools--no modifications to existing electronic components. Can be turned off to ensure smog certification. This add-on module connects to your car's sensors. It incorporates an 8-bit micro-controller that increases engine performance by constantly monitoring the sensors' output characteristics (more than 40 times/second) and modifying the input to your car's existing computer. Performance when you need it...automatically! During normal driving, the Venom 400(tm) is passive. It activates only when the micro-controller "senses" that the engine airflow and throttleposition require more performance. When performance demands return to normal, the Venom 400(tm) returns to "sense only" mode. Red LED indicates when the module is activated. Can be turned off with the flip of a switch, restoring performance to original-equipment specifications. Normal fuel economy is maintained. Safe for car's electronics. Will not trigger car's emission safeguards. Works with automatic and manual transmissions.
Manufacturer: VENOM
SKU: 10101-2005096

REPLACEMENT GAS TANK Shippedseparately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2005693

CARPET FLOOR MATS Custom tailored for a perfect fitA blast from the past for New Beetles Fun retro styling plus plush, luxurious protection for New Beetles. Embossed design made to last for the life of the mat. Super-thick, heavy-duty 20-oz. nylon carpet is famous for its long wear and superior fade and stain resistance. Nibbed vinyl backing keeps mats in place—no curling, slipping or sliding. Edges trimmed with attractive velour binding to prevent raveling. Set of 4 for front and rear of car.
Manufacturer: Dash King
SKU: 10101-2007414

SHOVEL BRACKET Shipped separately from factory. NOTE: SKU numbers ending in F are factoryshipped and may take a little longer to reach you.
SKU: 10101-2000588

COMPETITION-STYLE TURBOVENTS™ FENDER AND HOOD PANELS Simulated air intake louver vents add turbo power styling Panels have smooth contours and tapered edges for mounting on almost any flat surface Choose tough black molded ABS plastic-ready to paint after normal surface prep or carbon-fiber look (hydrographic manufacturing process and clear coat create the high-definition finish) Create your own performance look. Panels install easily with 3M™ tape included—no drilling. Includes instructions. Small louvered fender/hood panels are approx. 5"W x 7-1/2"L. Medium louvered hood panels areapprox. 5-1/2"W x 25"L. Large louvered hood panels are approx. 11-1/4"W x 24"L.
Manufacturer: AutoVentshade
SKU: 10101-2006735

AMPLIFIER INSTALLATION KIT Everything needed to safely and properly install your amp 20 feet of red power wire and 4 feet of black ground wire 20 feet of 16-gauge blue remote turn-on wire Also includes 20 feet of 12-gauge speaker wire; 20 feet of right-angle RCA audio cable; 6 feet of black split-loom cable conduit; gold-platedAGU Type 60A fuse; water-resistant in-line fuse holder; 2 ring terminals; 2 spade terminals; five 14-16 gauge spade terminals; 3 butt connectors; 20 cable tires; black grommet.
SKU: 10101-2001192

DIAMOND-TREAD BODY CLADDING KITS Add a tough off-road look in minutes! Custom-fit diamond-tread impact-resistant Dura-Flex plastic UV-protected matte black finish can be easily painted to match vehicle All components are custom formed to fit perfectly and install easily with high-bond 3M™ tape—no drilling required! The perfect complement for Bushwacker® pocket-style flares or factory-original flares. 6-piece kit includes 2 rear corners including license plate holder, 2 side rocker panels and front bumper filler and rear tailgate trim accent pieces.
Manufacturer: Bushwacker
SKU: 10101-2002656

Wehave all of the necessary accessories to make your installation and use of the new winch complete. Each Winch requires a mount plate, and a hardware kit appropriate for the year of your vehicle. We also have fairlead covers, and full covers. Don't forget the essential pulley blocks, chains and recovery straps!
SKU: 92141 600
Category: Miscellaneous

CUSTOM-FIT BILLET ALUMINUM GRILLE Installs in minutes—anew look for your new truck in no time at all! Bolts easily over existing grille—no cutting, nothing to remove and no drilling for most applications Allows truck logo to show through CNC machined and formed from polished aircraft-grade 6061-T6 aluminum. Each grille is CAD designed and tig-welded by hand to ensure aerospace-quality tolerances and a perfect custom fit. Hardware and instructions included.
Manufacturer: Carriage Works
SKU: 10101-2004849

ORIGINAL-STYLE BUTTON-TYPE SNAPS Replace snaps on antique cars, convertible tops and tonneau covers. Nickel-plated, rustproof. All snaps can be attached without special tools, but we recommend use of punch and die set (E)—sold separately—foreasier, more professional installation of snaps (B and C). Pkg. of 50.
Manufacturer: Car Pak
SKU: 10101-2008050

MODEL ESD7000 RADAR/LASER DETECTOR Maximize your awareness of the driving environment Introducing a new generation of radar technology! Visual and audio alerts for each band plus signal strength indicators Our lowestpriced detector! 6-band detection—4 radar signals (X-band, K-band, Ka Superwide band, VG-2 Alert System), all laser signals on one band (not separate bands for each signal) and Safety Alert® system. Safety Alert®—warns of emergency vehicle and road hazards from system equipped with Safety Alert® transmitters. VG-2 Alert™—lets you know when you're under VG-2 radar surveillance. VG-2 Undetectable—makes you immune to VG-2 detection. Spectre Radar Detector detection. Omnidirectional 360° laser protection. UltraBright— Data Display—uses identification letters to indicate radar band detected. Adjustable windshield mounting bracket, optional fasteners for dash mounting and 12-volt coiled power cord with cigarette lighter plug included. Why You Should Choose A Cobra® Features ESD7000 XRS9300 XRS9400 XRS9500 XRS9600 9870 Ultra Performance™ (extra detection range for advanced warning)           X X K & Ka Band Pop Gun Alerts (detects this latest, super-fast, instant-on-mode)       X   X IntelliShield™ False Signal Rejection (rejects false signals in densely populated areas)         X X Smart Power™ (shuts off unit with ignition)       X   X 8-point Electronic Compass       X   X Easy-set Programming Menu         X X Voice Alert™ (provides seperate voice identification of all speed monitoring & Safety Alert® signals)     X X   X Voice or Tone Alert   X   X X   X DigiView™ Data Display (provides separate alerts for all speed monitoring & Safety Alert® signals in an easily recognizable digital text)       X X X Intellimute™ (eliminates false alerts)   X X X X X Strobe Alert™ (strobe signals warn of emergency vehicles)   X X X X X System-ready Prompt   X X X X   X Digital Signal Strength Meter   X X X X   Setting Memory   X X X X X   Bands Detected 6 11 11 11 11 11
Manufacturer: Cobra
SKU: 10101-2001721

REVERSE COMPETITION EL™ 2" ELECTRICAL BOOST GAUGE Face is Black Electroluminescent dial markings are white when vehicle is not running but glow blue when power is on Morphing control (sold separately) lets you change the dial markings (5 different shades from coolblue to neon green) and intensity for a radical look in any setting Ultra-slim design for easy mounting almost anywhere—all necessary fittings and adapters included 0-30 psi. 270°. Black face with red pointer. Unparalleled precision and accuracy. Vibrationproof air-core meter. Brushed aluminum bezel. 2" diameter.
SKU: 10101-2008833

OIL PRESSURE GAUGEReplacement for original Mechanical type gauge registers 0-81 psi For all Ford and Willys Military (MB) Jeep® and Jeep® CJ2A, 3A and 3B models
SKU: 10101-2010549

BLACK POWDER-COATED INNER BRACKETS Replace stock or painted parts with the latest black powder-coated look Elevate your Jeep®'s look to a whole new level! Sold inpairs.
SKU: 10101-2000595

FAIRING SIDE PANEL Paintable,molded of super-strong, high-impact black ABS plastic to original specifications Mounts to cycle using existing hardware Available for left or right side. Some drilling of replacement part required.
Manufacturer: Maier Mfg
SKU: 10101-2006716

Great designs by Kayline. The Half top model covers the front seats and ends in the front of the roll-over bar. Rear window rolls up for ventilation. All kits complete with soft doors and also allow the use of full-height hard doors. All hardware and fittings are included. 11 colors to choose from. Please note that the half topcannot be used with a roll bar mounted shoulder harness and therefore should never be installed on a vehicle which has a factory supplied shoulder harness.Don't miss the new Fasttrac railmounted tops that eliminates drilling for snaps, and forms a continuous body seal. The perfect tops for restored Scramblers with pristine bodies. The Fasttrac half top can be used with a new, optional tonneau cover (#21080) that protects the exposed bed from the elements and covers your belongings for a finished look.
SKU: 21079 01
Category: Miscellaneous

TURN SIGNAL GRILLES Brightcustom styling plus protection for front and rear turn signal lenses Available in 2 styles For '86-99 Honda cycles
SKU: 10101-2003452

Bridgestone Potenza S-03 Pole Position Tire priced from $114.00 to $330.00. The Potenza S-03 Pole Position is a Max Performance "summer" tire that was developed to meet the needs of the drivers of high performance sports cars, coupes and sedansby bringing Bridgestone's F1 tire technology and design to the streets while blending dry and wet traction without abandoning comfort and wear. The Potenza S-03 Pole Position features Bridgestone's UNI-T AQ II Technology that uses advanced compound and construction features to enhance and preserve wet traction through the tire's life. The Potenza S-03 Pole Position provides max performance that lasts.On the outside, the Potenza S-03 Pole Position molds a Super Long Link Carbon Black, Dual Layer Tread II compound into a directional tread design that features notched shoulders, large "High Nose" intermediate tread blocks (that are shaped like the side view of a "high nose" F1 car) and a continuous center rib to provide quick dry road response and handling. Super ...
Manufacturer: Bridgestone
SKU: Bridgestone Potenza S-03 Pole Position Tire
Category: Automotive Parts and Accessories Parts Tires

3-BATTERY SYSTEM BATTERY ISOLATORS Run accessories in vehicle without draining battery Automatically charges auxiliary battery as you drive, neverovercharges Self-contained electrical system converts alternator or generator to safe, efficient charger For 1986-2005 Chevrolet, GMC and Toyota vehicles Automatically isolate both the auxiliary and vehicle batteries so the discharge of one does not drain the other's power. Handle alternators up to 165 amps. Rectifiers and heat sink allow maximum heat dissipation without mechanical attachment. Eliminate shorting problems. Solid state. For all 6- to 36-volt, negative-ground electrical systems. UL listed. Connector kit required (sold separately).
Manufacturer: Leisure Components
SKU: 10101-2006118

REAR DISC BRAKE PISTON TOOL Rotates and adjusts rear disc brake pistoninto caliper cylinder…a must when installing new pads Works on all rear calipers on or off vehicle For American and imported vehicles Works with 3/8" drive ratchet or breaker bar with extension. Steel.
Manufacturer: MIT
SKU: 10101-2004106

TRAILER DOLLY Dual 7" x 1.50" vinyl wheels Steel with baked enamel finish 41-3/4" long handle leverages weight on trailer tongue…makes moving a loaded trailer easy and hookups a snap. 1-7/8"coupler ball. Vinyl grips. Easy assembly. Instructions included.
Manufacturer: Attwood
SKU: 10101-2004432

FAZE™ COMPETITION EL™ 2" ELECTRICAL AIR FUEL RATIO GAUGE Electroluminescent white face that glows blue when you switch on the power Digital Morphing control (sold separately) lets you change the face color (from cool blue to neon green) and intensity for a radical look in any setting Made to the highest quality standards for unparalleled precision and accuracy 2" diameter. Multicolored LED sweep illumination. Works with all O2 sensors. Ultra-slim design for easy mounting almost anywhere—all needed fittingsand adapters are included. Vibrationproof air-core meter. Brushed aluminum bezel—different color bezels sold separately. Easy-to-read black numerals.
SKU: 10101-2008856

ADJUSTABLE CAM GEAR SET Now it’s easy to adjust valve timing on your Acura/Honda Si B-series VTEC DOHC engine! Adjust valve timing by 1° or 2° increments and then lock it in place…without slippage 6061-T6 aluminum with anodized color finish Exclusive Time 'N Lockdesign allows the quickest, most precise adjustments—even at the track! Manufactured to match OE profile. Set includes one intake and one exhaust cam gear plus hardware. Limited one-year warranty.
Manufacturer: Street fighter series
SKU: 10101-2009919

Greatprotection and style! Constructed of genuine wet suit material. Highly water-resistant neoprene is grippy on the inside (facing seats) and soft on the outside. All covers are made to order in a wide variety of colors to your own specifications. They are easily installed without removing the seats from the Jeep. Models for front and rear seats for all CJ and Wrangler models.
SKU: 14267 235
Category: Miscellaneous

A combination of a step, sidebar, and running board in one. Corrosion resistant aluminum construction fits all Wrangler vehicles through '00. All hardware is included. Step area has grippy tread spikes for surefooted climbing. Sold in pairs.
SKU: 12526 02
Category: Miscellaneous

These color-matched, zip-in mesh windows let your soft top breathe. Great for summertime cruising and for keeping your vehicle cool when parked in the sun, they also keep dogs from overheating on long drives. The mesh is durable and installation is a breeze.
**For use on '88-'95 Wranglers with factory original soft top & half steel doors or Bestop Replacement top.
SKU: 11038 117
Category: Miscellaneous

Check out these improved Wrangler-style hard half doors. Fiberglass door kits are double wall construction. Finished in gloss black on the outside, and features a molded arm rest, with padded style door handles inside. All hardware included, some drilling required for installation. Original version #11040.00 with less elaborate interior panel still available, but will not accept any type of upper doors or windows. New & Improved versions #11040.01 and 11140.01 will accept upper door sliders and upper half doors.
SKU: 11140 01
Category: Miscellaneous

TRIGGER LOCK TRAILER COUPLERS Couplers availablein several styles and sizes
SKU: 10101-2004423

SHADOW™ WIPER COWL Installs easily with 3M™ Dual-Loc™ tape—no drilling for most vehicles Limited lifetime warranty A great-lookingadd-on with real function year-round! Cowl hides and protects windshield wipers and adds a smooth, custom, "chopped" look without affecting wiper operation. Matches LUND® shields. Polymer material is clear (paintable to match vehicle) or smoke tint. Includes screws (for installation on some vehicles), hardware and instructions. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Lund
SKU: 10101-2001985

INTIMIDATOR™ STAINLESS STEEL EXHAUST TIP Forged stainless steel (the finest available!) is mirror-bright to make this tip look as good as it sounds Bolt oninstallation (unless noted differently) 8" long overall
Manufacturer: APC
SKU: 10101-2006268

PAINT RUN/DIRT SPECK REMOVER Buffing the shaved area will restore shine Select coarse teeth for deep flawsor fine teeth for minor imperfections Eliminates costly and time-consuming repainting or unattractive patching Specially honed teeth to gently shave away high spots on painted finishes without gouging or digging into the coated surface!
SKU: 10101-2004087

CHROMED INTERCOM CORD HOLDERS Intercom boot holders or cord clips available Chromed holdersand clips sold in pairs for front and rear
SKU: 10101-2001486

3-PC. WOBBLE EXTENSION BAR SETS Chrome-vanadium steel. Choose 3/8" or 1/2" Drive. Perfect for hard-to-reach nuts and bolts in today's cars, trucks and RVs. Tapered male end allows for 16" angle flexibility for better clearance and control. Securely holds socket or extension straight or atan angle. Chrome-plated and polished, heat-treated and hardened chrome-vanadium alloy steel. 3-pc set includes 3/8" or 1/2" drives with 3", 6" and 8"L bars.
Manufacturer: Peak Power Products
SKU: 10101-2007905

ENGINE COOLING - THERMOSTATSWITCHES For all electric engine-cooling fans we sell.
Manufacturer: HAYDEN
SKU: 10101-2000903

CUSTOM-FIT EZ BRACKET™ MOUNTING KIT Body-mount system dramatically reduces installation time Eliminates drilling into truck's framewhile ensuring a rock-solid professional installation Keeps body and frame separate to eliminate vibration and road noise Heavy-duty galvanized steel U-channel brackets. Depending on application, may require drilling into rocker panel or floor. Hardware and instructions included.
Manufacturer: Lund
SKU: 10101-2001819

BLACK POWDER-COATED SPORTSMAN™ TAILLIGHT GUARDSDurable steel tubing designed to enhance the lines of your lights and carefully sanded to achieve the smoothest finish and welds possible Tough, beautiful semi-gloss black powder-coat finish Heavy-duty brackets for a secure fit Top quality protection alone…or the perfect complement to our Sportsman™ grille guards. Rounded inset rods. Mitered corners and blended welds. Drilling may be required for some applications. Limited 5-year warranty. Sold in pairs.
Manufacturer: Westin
SKU: 10101-2002083

S2 LOWERING SPORT SPRINGS Progressive spring rate maintains ride quality while improving road feel and handling Made of cold-wound high-tensile chromium-siliconewire Individually super blocked and computer tested against tight tolerances By redesigning OE springs and lowering the center of gravity from 0.9” to 2.5” (depending on application), B+G has produced springs that will dramatically enhance your car’s performance and appearance. Progressive-rate design ensures higher spring rates for better road “hold” plus riding comfort. 1S09001, QS1400 and TUV certified. Set of 4. Limited lifetime warranty. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: B+G Suspension
SKU: 10101-2009921