BODY CAB MT SET CJ8 81-86 BLK @ Automotive online store

Original rubber mounts are so soft that they crack, distort, and crush so badly they often fall out. Energy Suspension's specially formulated polyurethane body mounts combine the best qualities of softness for a smooth ride, yet rugged enough for the most demanding off road trails. Mounts have a steel ring molded into the end for added durability no matter how harsh the terrain. CJ kits DO NOT include body mount washers.
SKU: 26058 61
Category: Miscellaneous

Finally, we have custom embroidered Front Floor Mats with the genuineJeep® Logo for vehicles all the way back to 1st generation CJ-5 vehicles. These front pairs are available in 3 colors. Black mats have gold logo, Gray and Tan mats each have black logos. Specific models for each year range.
SKU: 14156 401
Category: Miscellaneous

REMOTE KEYLESS ENTRY SYSTEMS Remotely lock and unlock your vehicle and open your power trunk with the push of a button 4-button extended range remotetransmitter with slider protection For all vehicles with power door locks Keyless entry with onboard relays. Easy to install in less than 20 minutes. Output for starter immobilizer and remote trunk release (immobilizer and remote trunk release accessories sold separately).
Manufacturer: Bulldog
SKU: 10101-2001399

WINDOW COWL DOOR CHANNEL Fits Jeep M38 '50-'51 Available for drive & passenger side Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer toreach you.
SKU: 10101-2008562

SAE 12-PC. DEEP WELL AIR IMPACT SOCKET SET Heavy-duty 6-pt. sockets for use with air-powered impact wrenches to speed installation and removal of nuts, bolts and studs 1/2" drive deep-well sockets Made of drop-forged and heat-treated chrome vanadium steel—the finest tool steel available Beveled nose for easy on and off. Holes for locking pin in drive tang. Black penetrate finish. Set includes sockets and storage trayor box. Sizes: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16" and 1". Limited lifetime warranty.
Manufacturer: MIT
SKU: 10101-2007656

PIT CREW WORK MAT Dense, padded cushionshelp smooth out the roughest surfaces Industrial-grade vinyl covering withstands heavy abuse, solvents, grease, etc. Designed to make your repair/maintenance work a lot easier Approximately 18"W x 49"L fully extended. Folds to compact 18" x 24-1/4" size for easy storage.
Manufacturer: Pilot
SKU: 10101-2007768

AIR TOOL HOSE Oil and chemical-resistant nylon Each end has 360° swivel 1/4" NPT brass male fitting and spring guard to prevent airflow restriction Stretches up to 25 ft. and then snaps back into positionwithout tangling 200 psi capacity. 1/4"ID
Manufacturer: MIT
SKU: 10101-2009254

WHEEL CYLINDER ASSEMBLY For '54-89 Volkswagen vehiclesReplaces old or worn parts perfectly Not for front of 411, 412, Squareback or Fastback.
SKU: 10101-2008505

DELUXE 14-PC. INNER AND OUTER BELT WEATHER STRIPPING KIT Replaces original weather stripping perfectly Prevents drafts, water and dirt from getting inside doors and quarter panels for 2- and 4-dr. sedans For '55-57 Chevrolet sedans Cushions glass and helps prevent rattles. High-quality rubber and stainless steel beading are same style and shape as original. Factory-style attaching clips for fast and easy installation. Mitered ends. Kit includes 8 piecesof belt weather stripping plus channel for all side windows.
Manufacturer: Fairchild Industries
SKU: 10101-2008573

REPLACEMENT CROSSMEMBER AND BUMPER PARTSShipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2004800

Save when you buy our Bestop bikini, windjammer and duster combo. This kit comes complete with the necessary channel to quickly install the kit. Made by Bestop to factory matched colors in genuine (original specs) Haartz material. This kit is for when your '92-'95 YJWrangler came factory equiped with a hardtop.
SKU: 11080 17
Category: Miscellaneous

OVERFLOW BOTTLE - ANTIFREEZE AND COOLANT For vehicles not equipped with a coolant return system, or as a replacement upgrade for damaged original system Increase vehicle cooling system capacity to help prevent overheating and loss of coolant Installs easily with adjustable brackets. Complete with all necessary tubing, spring clamps, hardware and instructions. For open (older) systems with radiator and overflow tube and closed (newer) systems withradiator and overflow tube connected to reservoir with snap-off cap. Heavy-duty construction. Choose compact kit for smaller vehicles with limited space and large kit for vans, RVs, 4x4s, trucks, full-size cars and other large vehicles. NOTE: Not for pressurized reservoir system.
Manufacturer: Interdynamics
SKU: 10101-2000880

CHROME-PLATED TIMING COVER KIT Triple-chrome-plated Polishedto a high luster For Chevrolet and Chrysler engines Gaskets, timing tab, chromed bolts and AN washers included.
SKU: 10101-2005302

TRUNK CARPETING AND IN-TRUNK SPARE TIRE COVER Custom-fit For '62-79 Volkswagen Beetle and Super Beetles Dressup your trunk and spare tire. Black cut-pile velour carpeting. Prevents draft through firewall, lessens noise.
Manufacturer: Newark Auto Products
SKU: 10101-2007274

THERMO CLOCK BATTERY-OPERATED INDOOR/OUTDOOR THERMOMETER AND CLOCK Temperature or time is shown on the large, easy-to-read 3/4"H LCD display A simple flick of a switch indicates what the temperature is (-4° to +158° F) or what the time is. Compact unit has a built-in sensorand an external sensor to monitor temperatures both inside and out. Black plastic housing is approx. 2-7/8"W x 2"H x 3/8"D. Installs easily with included mounting bracket and double-sided tape. Built-in leg lets you stand unit on table or desk. Includes battery and instructions.
Manufacturer: Bonatrade International
SKU: 10101-2008112

ALUMINUM REPAIR TAPE Repairs rusted-out areas oncar bodies Available in 3 sizes Much less expensive than stainless steel! Seals heat and air conditioner ducts. Repairs gutters, eaves, etc. Super-strong acrylic adhesive withstands extreme temperatures (-20° F to +200° F). Countless uses for this economical tape. 3 mils thick—cuts easily with scissors. Tensile strength: 11 lb./square inch. Adhesion: 165 oz./square inch.
Manufacturer: Tyco Adhesives
SKU: 10101-2000573

Borla Headers are tuned to suit your vehicle. They increase power and maximize fuel efficiency. Most header kits are designed for use on vehicles with manual transmissions. Vehicles with automatics may require modifications to make fit.When combined with a Cat Back system, vehicles experience 10-15 horsepower increases. Great sound with excellent flow. Borla systems are street legal in 50 states. With the Million Mile Warranty, Borla is the last exhaust system you'll ever need to buy.
SKU: 27601 04
Category: Miscellaneous

AIR CONTROLLER™ REAR WINDOW AIR DEFLECTOR Custom-fit deflector looks great and helps keep your rear window clean for safer driving Aerodynamic deflector channels airflow down over the rear window glass to help prevent grime and dirt buildupMade of smoke-tinted scratch-resistant aircraft-grade acrylic Designed to blend beautifully with your vehicle's lines. Easy to install. Drilling may be required. Won't interfere with third brake lights. Instructions included.
Manufacturer: Lund
SKU: 10101-2004982

CUSTOM-FIT IMPACT-RESISTANT HEADLIGHT PROTECTORS Protect your expensive headlights against scratches, cracking, pitting and holes caused by road debris, branches, etc. Optically-clear vinyl has laminated hard acrylic coating—it's thinner (only 23 mils) yet stronger than thicker shields…more resilient and scratch resistant, too UV stabilizedto minimize discoloration and yellowing of your plastic headlights Headlights can cost anywhere from $170 to $2,500—isn't the cost of these shields a small price to pay for the protection you get and the money you save? Adhesive-backed protectors install easily in minutes without tools. They're unbreakable, non-yellowing, maintenance-free and clean like glass. Won't change the look of your headlights! Sold in pairs.
Manufacturer: Impact Headlight Savers
SKU: 10101-2009433

CHROMED OR BLACK STEP Offers dress-up styling and added safety Nonslip safetyinsert on step Custom fit for '81-96 Ford full-size pickups and Broncos Strong all-steel construction. Approx. 11"W x 3-1/2" heavy-duty step plate. 1" diam. tubular step frame. Easy installation requires some drilling. Includes hardware and instructions. Choose chromed or black powder-coat finish.
Manufacturer: C P Auto Products
SKU: 10101-2009232

DIAMOND-CUT HEADLIGHTS A revolutionary new look for your car! Custom-fit Installs easily—uses factorywiring Sold in pairs. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2010132

CUSTOM-STYLED WINDSHIELDS 3/16" thick acrylic (strong, shatter resistant, optically clear) with smooth chamfered edges Predrilled for easy installation—mount like original using existing hardware Custom-fit windshields meet or exceed DOT specifications Instructionsincluded.
SKU: 10101-2000702

REAR FLIP KIT Relocate the rear axle on top of the rear leaf spring pack for lowest drop possible! Belltech, the recognized leader in truck suspension products and 4-time winner of the prestigious SEMA awardfor best new product, offers kit as part of a complete line of top-quality suspension components designed to help you "build" your truck to match your personality and lifestyle! Includes contoured, heavy-duty C-sections, heliarc-welded saddles, spring plates and shock extension with tough powder-coat finish, 5/8" U-bolts, top-grade hardware and instructions. For the ultimate drop, use with front spindles and springs (both sold separately). Flip kit will not fit all-wheel-drive vehicles. When lowering the rear 4" to 6", you must check that the yoke is properly positioned in the transmission; rear transmission seal must be in the original position on the yoke.
Manufacturer: Bell Tech
SKU: 10101-2005840

HATCHBACK-STYLE WOOFER BOXES 2 high-power 4-ohm subwoofers Two 2" x 5" piezo tweeters 2" aluminum voice coil 2 woofers PLUS 2 tweeters in ONE boxwith 2 tuned ports! Features include: nonpressed paper cone with rubber edge; specially-treated black rubber-edge suspension; rear vents; 2 handles for easy portability.
Manufacturer: Pyle
SKU: 10101-2009854

SATIN STAINLESS STEEL HOOD CATCH KIT Exciting new satin finish featuring professionally-etched 304 stainless steel Easy to install—no drilling required Rustproof A great alternative to ordinary polished stainless steel. Distinctive looking satin-finished accessory built to last. Hardware has samegreat finish. Get the newest, hottest look for your Jeep®. Sold in pairs.
SKU: 10101-2000326

DRESS-UP ALUMINUM WATER PUMP PULLEY Fully-machined pulley replaces original and adds a high-tech look to your engine For Chevrolet V8 engines For '55-85 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400 small-block engines. NOTE: Diameter may differ slightly from original; a longer or shorter fan belt may be required for some applications.
SKU: 10101-2000912

2" COIL SPRING LIFT SPACER KITEverything you need in one complete kit to lift your Jeep® 2" at the coil Kit includes 4 nylon composite bumper stock blocks, 4 urethane lift blocks and all necessary fasteners. Questions? Log onto www.performanceaccessories.com.
Manufacturer: Perfornance Accessories
SKU: 10101-2005835

REAR-VIEW REPLACEMENT MIRRORS Choice of stainless steel (5-3/8" x 8-1/2") or black ABS plastic (5-1/2"x 8-1/2") with black painted-steel mounting arm and brackets Replace damaged original mirror. Swing in close to body on impact to prevent damage. Passenger's side mirror has convex glass for more viewing area. Driver's side has flat glass. Includes hardware and instructions. Black ABS plastic mirror fits both left and right sides.
Manufacturer: Cipa
SKU: 10101-2008344

INTERCOM CORD AND BOOT HOLDER One-piece special design holder allows fast and easy one-hand intercom plug in! Replace drab,original black driver and passenger holders with these stylish chromed ABS plastic holders Install with bolts and pressure-sensitive adhesive backing (both included) Sold in pairs only.
SKU: 10101-2001487

SLIM-LINE MINI 55-WATT HALOGEN FOG LIGHT Replaceable 55-Watt H3 Halogen bulbs Yellow glass lenses Only 2" high for effortless mounting even in the most compact spots. Matte black high-impact plastic housing are approx. 6-5/8" W x 2" H x 3-1/8" D. Includes 2 lights, wiring, switch, hardware and instructions. For12-volt negative-ground systems. Fog replacement lens available.
Manufacturer: Eagle Eye
SKU: 10101-2003748

CAT'S-EYE 3-IN-1 LIGHTING SYSTEM The most versatile lights you can buy! A fog light, driving light and parking light all in one! Super-white xenon bulbs-brighter and whiter than halogen, close to HID lighting Exclusive slanted cat's-eye styling sets these lights apart from the crowd Beautiful chrome-plated bezel, light gray cast housing and blue-tinted lens. Photometrically designed/hardened lenses for superior visibility, durability. Each light incorporates 3bulbs: one 55-Watt H-3 fog, one 55-Watt H-3 driving and one 4-Watt parking. Approx. 5-3/4"W x 2"H x 3-3/4"D. Dash-mount LED 3-button switch controls lighting. Includes 2 lights, professional-quality wiring harness with plug-in connectors, 2 relays, fuse and fuse holder, hardware and instructions.
Manufacturer: Street Glow
SKU: 10101-2003771

The Classic is new all over again. Stone washed Denim is extremely comfortable. Details include Jeep® logo buttons, subtle above pocket logo and an adjustable waist. The leather patch makes the perfect finishingtouch.
SKU: 15160 13
Category: Miscellaneous

REPLACEMENT BUMPER ASSEMBLY Replacesdamaged or rusty original perfectly to help restore original vehicle look and integrity Comes with correct cutouts and mounting holes—installs using existing original hardware Primer painted; some surface prep may be required before painting Shipped separately from factory. NOTE: SKU numbers ending in FE are factory shipped by truck freight.
SKU: 10101-2004797

A true space saver with ample storage. This super secure utility drawer is mounted under the rear seat, providing a secure place to store tools, emergency equipment, pullout stereo, detachable stereo face plate & other valuables. Using the hardware provided, this security drawer can be mounted with the drawer opening toward either the front or rear of the vehicle. Wrangler seat will still fold and tumble.
SKU: 24251 100
Category: Miscellaneous

REAR SECTION HIGH-PERFORMANCE EXHAUST KIT Custom-fit kit produces a deep but not excessively loud roar Polished stainless steel Order therear section only or the rear section plus the mid-section for a complete cat-back system. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Arospeed
SKU: 10101-2005288

AMBER SIDE MARKER LIGHT KIT Includes socket, wiring, bulb and lens. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may takea little longer to reach you.
SKU: 10101-2003391

PERFORMANCE AIR INTAKES Get the latest advance in air filtration technology! Unique 2-part polyurethane foam materialtraps dirt and debris while letting air flow through Full-depth filtering system—interlocking cells coated in oil trap and hold the dirt through the entire volume of the filter Foam filters are far superior paper or gauze—they're 12 times thicker and continue to perform even as the filter gets dirty. And here's the best part…when the filter gets dirty, just wash and reuse! Will not void factory warranty. Lifetime warranty.
SKU: 10101-2005573

REPLACEMENT RUNNING BOARD Replaces dented, rusted or broken running board perfectly Restores original appearance or adds a custom look For '54-79 Volkswagen Beetles and Super Beetles Top-quality steel with high-grade rubber matting. 3/4"Wbright anodized molding. Completely assembled. Bolt-on installation—all mounting hardware included. Driver's and passenger's side available.
SKU: 10101-2001807

CLUTCH DISC ASSEMBLY Flexible spring center with woven or molded liningDistributes torque load evenly for smooth action—just like original equipment For air-cooled Volkswagens
SKU: 10101-2001100

BATTERY CABLE QUICK CONNECTORS Excellent for marine or automotive use Time-saving hassle-free way to remove and install battery No tools required to quickly connect or disconnect cables at battery For use on top post batteries or on side terminal batteries by using post adapters. Clamping action tightens on battery post when cap is snapped down, loosens when cap is lifted. Attaches to standard battery cable with integral compression clamp. 12-volt rated: 500 amps continuous, 800 amps surge. Copper-zinc alloy, 316stainless steel and polypropylene construction. One red and one blue connector included. Limited one-year warranty.
Manufacturer: WIRTH CO
SKU: 10101-2009446

PORTABLE ABRASIVE BLASTER Standard abrasive blaster Easy to operate anywhere Includes gun, nozzle(extra ceramic nozzle available separately), 8-ft. hose with 2 clamps, 1/8" and 5/64" orifices, aspirator tubes and instructions. Specifications: Requires 1.5 to 8 cfm at 60- to 125-lb. air pressure, depending on orifice size used.
SKU: 10101-2007608

OUTER FLOOR PAN REPAIR PANEL Repair rusted and dented panel with this perfect-fit, die-formed and shaped panel Heavy-gauge primer-coated steel prohibits rust Fits '54-79 Volkswagen Beetles and Super Beetles Available for front or reardriver's or passenger's side. Repairs approx. 7-1/2" of outer edge of floor pan. Restores sill. Front section approx. 31"L, rear section approx. 35"L. Installs easily with screws, by welding or by riveting (welder or rivet gun not included). Finish with epoxy filler (sold separately) and paint.
SKU: 10101-2000419

CHROME-PLATED LOWER-SADDLEBAG AIR DAM SPOILER SET Chromed 4-piece molded ABS plastic spoiler set replaces your original almost "invisible" color-matched wraparound spoilers Adds extra custom styling to your saddlebags Set mounts like original using existing hardware Accents both left and right sides ofsaddlebags. Installation instructions included.
SKU: 10101-2006608

CHROME TRUNK AND SADDLEBAG DUAL-RAIL ACCENT INSERTS Full-wraparound tubular steel rails (lower rail is 1/2" diameter, upper rail is 3/8" diameter) mount with included hardware (drilling required) and extend approximately 1/2" from trunk or saddlebag Custom-fit, easy to install wraparound customstyling for your trunk saddlebags. Can be used alone or with the accent inserts for a completely coordinated custom look. Trunk: One-piece accent has 6-point mounting. Saddlebags: 5-piece set has 8-point mounting (2-points for each of the 2-sides and 2 rear pieces.
SKU: 10101-2006623

Our heavy duty shackles give an extra 1.5" of lift to your Wrangler or CJ. A big improvement over the factory shackles, which are just two steel plates bolted together. Our shackles are made of heavy gauge steel and welded with a brace between the side plates. Sold in pairs -buy one set for the front and one for the rear. FITS 1976-86 CJ REAR AND 1987-95 WRANGLER FRONT.
SKU: 16049 201
Category: Miscellaneous

ROLL BAR GRAB HANDLES Nomatter where you travel you'll have a helping hand to keep you steady or assist you in and out of your Jeep ® Hang on—easily and comfortably Hook-and-loop system attaches handles to roll bars (with or without padded covers) Don't go off-roading unless you're prepared. Part of the Off-road Necessities Pack. Buy the pack (SKU# 51ZX1261N) at a 12% savings PLUS get the sun visor clip FREE! Limited one-year warranty. No-slip grip. Sold in pairs.
SKU: 10101-2003068

Brembo GT 315mm Big Brake Kit priced from $1149.00 to $1435.00. Black fixed 4 piston calipers (STYLE 1). Drilled 1 piece vented rotors (STYLE A). Seeproduct details for a list of typical kit components
Manufacturer: Brembo
SKU: Brembo GT 315mm Big Brake Kit
Category: Automotive Parts and Accessories Parts Brakes

GENERATORCOVER Polished stainless steel Fits Type I and II Volkswagens with 12-volt generators
SKU: 10101-2010356

Kosei K1 Racing SilverPainted Wheels priced from $109.00 to $199.00. Kosei K1 Racing Silver Painted Wheels.
Manufacturer: Kosei
SKU: Kosei K1 Racing Silver Painted Wheels
Category: Automotive Parts and Accessories Parts Wheels

FULLY-AUTOMATIC AUXILIARY FOG LIGHT KIT Intella-Sensor detects driving conditions and AUTOMATICALLY turns lights on or off as needed! Indigo blue lenses tosimulate much more expensive HID lighting Easy to install—no wires to splice (prematched plugs plug together), no switches to mount, no drilling through firewalls Approx. 3-3/4"W x 2-1/4"H x 2-3/4"D fog lights with black metal housings and 55-Watt H-3 halogen bulbs. Includes 2 lights, universal mounting brackets, wiring harness. Limited 1-year warranty.
SKU: 10101-2003744

ROUND-TUBE HEADACHE RACKS Solid as a rock…good looking, too! Heavy-duty 16-gauge steel tubular frame protects rear window glass from shifting cargo Featuring the exclusively-designed Go Industries mounting system for extra rigidity and support! Split-top louver accommodates your cab-mounted brake light. Predrilled steel feet are angled at 90° to anchor the rack to the top and inside edges of your bed rails. 2-dimensional, double-bolt design provides the extra strength you want ina headache rack. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Go Industries
SKU: 10101-2009510

Get ready to read this twice: Customers who own this top have reported that at highway speeds this top is quieter than a factory hardtop. It's a miracle! The secret lies in the unique multi-ply Sailcloth fabric. It reflects road sounds, absorbs wind noise and prevents buffeting to create a silencing effect that must be heard to be believed. In addition the beefier Sailcloth fabric resists temperature-induced shrinkage, making cold-weather installation much easier. It also shows fewer waves and wrinkles than conventional tops and cleans more easily to help make your rig look really sharp.Please note that Bestop Replace-a-Tops will ONLY fit over the original top and door frames which were supplied with the vehicle new. If in doubt as to the origin of your top and door frames, please use our "LivePerson" customer service to contact one of our representatives or call toll free to speak to our customer service at 1-800-745-6037 (US and Canada) or 610-701-3336 for international customers. Original Top Replacement Tops are manufactured by Bestop to the same exact OEM standards as the tops they make for major manufacturers. Door Skins are included with this top.
SKU: 11132 117
Category: Miscellaneous

EUROSTYLE LICENSE PLATE COVERS Corrosion-proof and fade-proof molded acrylic Attaches securely to anystandard license plate. Note: Check local laws to determine if cover is legal in your state.
SKU: 10101-2001768

DUAL EXHAUST SYSTEMS FOR USE WITH "LONG-TUBE" HEADERS Collectors bolt directly to headers Tailpipes exit in front of rear wheels 6 performance levels Kits include four 15" extension pipes,two 30" long 90° tailpipes, 2 mufflers, flanges, flex joint reducers, clamps, hangers, gaskets and nuts and bolts to connect to headers. Check local emission laws before ordering. Not legal for sale or use on California pollution-controlled motor vehicles. This product is intended for off-road or racing use only and is not intended or applicable for highway use. Click on item SKU# for additional information.
Manufacturer: Heartthrob Exhaust
SKU: 10101-2006349

RADIATORS Free-flowing water passages ensure greater heat dissipation for better cooling efficiency Replaces original perfectly! New and ready to install Radiator cap not included. Check number of rows or cooling tubes on your existing radiator, then order the appropriate new radiator. Limited lifetime warranty. Warranty does NOT apply to radiators used for commercialpurposes. Prices listed are not for diesel applications; call (800) 571-5050 for prices. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. WHAT RADIATOR SHOULD YOU BUY? You can order a radiator with the same number of rows of cooling tubes (1, 2, 3 or 4) as existing radiator. To determine the number of cooling tubes, simply remove the radiator cap (be sure it's cool) and count the rows from front to back. If there isn't a cap, count the external rows that pass through the cooling fins. You can order a radiator with more rows of cooling tubes than existing radiator. To verify that a radiator with more cooling tubes will fit in your vehicle, please call (800) 628-5442. Orders cannot be taken at this number.
Manufacturer: American Designers
SKU: 10101-2000869

6-AMP AC/DC CONVERTER Instantly converts 120-volt AC power to 12-volt DC power Lets you enjoy 12-volt appliances in your home, hotelroom, dorm or RV Big 6-amp continuous capacity lets you run a wider range of 12-volt appliances/equipment than conventional converters…even food coolers/warmers! Easy to use. Simply plug your 12-volt appliance into the receptacle on the converter, then plug the converter into any standard 120-volt AC outlet (4-1/2 ft. power cord included). Reliable solid-state construction. Automatic thermal/overload shutdown. Only 5" x 3-1/2" x 2-1/2" for complete portability and easy storage.
SKU: 10101-2001684

ENGINE CASE For '66-74 Volkswagen 1300cc, 1500cc and 1600cc air-cooled vehicles Standard-size machined surfaces Cast and machined to meet or exceed original-equipment specifications Here's the solid base onwhich to build your classic or high-performance engine. No exchanges.
SKU: 10101-2005482

VENTEDFULL-FACE STREET HELMET Fingertip-adjustable forehead and chin-bar vents ensure all-around ventilation to help you stay cool Refer to HELMET SIZING CHART A (see below) Clear optical-quality injection-molded Lexan® face shield is treated with long-lasting anti-fog coating A JC Whitney™ exclusive! Engineered from the inside out for superior fit and riding comfort! Multiposition ratcheting shield has center tab for effortless adjustments. Ratchet assembly is concealed under screw-on side pods (pods are painted to match helmet). Designed for a quiet ride—extensive wind tunnel tests prove it! Padded and lined integral chin bar. Aerodynamic design of the outer shell plus the balanced weight throughout help prevent high-speed wobble. Combination of the one-piece specially-modified thermoplastic alloy outer shell and the one-piece polystyrene inner shell resists penetration and absorbs the brunt force of impacts. Comfort-contoured breathable foam padding (bonded to the inner shell) is lined with plush brushed perforated black microfiber nylon and features sewn-in sizing darts throughout to ensure a super fit and hours of relaxed riding. Revolutionary lining is sweat resistant—you won't feel clammy even on hotter days. Outer shell is triple sanded smooth before the premium paint is applied (for the metallics, only super-fine flakes are used to achieve the depth and brilliance). Tough high-gloss clear polyurethane coating protects the painted finish/graphics against scuffs and scratches and permits easy soap and water cleanups. Prix logo is applied over the clear-coat finish and can be removed if desired. Cushioned black nylon chin straps are double stitched to the steel double "D" ring retention system for strength. Smooth, molded black rubber base and window trim adds the perfect finishing touch. Meets or exceeds DOT standards. Replacement face shield and side pods (set of 2 with hardware) sold separately. IMPORTANT NOTE: Click on HELMET SIZING CHART link for helmet sizing information.
SKU: 10101-2000193

FUEL PRESSURE GAUGE For Integra GSR 1.8L V-TEC vehicles "Big shot" system injects large amounts of nitrous and fuel simultaneously into engine intake port without a nozzle in snorkel port Complete state-of-the-art injectorsystem installs between the factory 2-pc. intake manifold along the butterfly plate Increases power from 75 to 200 more horses! No modifications to factory electronic fuel injection required. With stock engine, system should be jetted at no more than 75 hp.
Manufacturer: NOS
SKU: 10101-2008878

12-VOLT HORN RELAY Prevents failure of horn or alarms. For horns and burglar alarms. Withstands heat created by continuous operation—will not overheat orshort out.
Manufacturer: Wolo
SKU: 10101-2009044

"Get true power gains and feed your engine cleaner air. The True Flow Air Intake Kit increases horsepower and torque, while trapping more dirt and debris than the leading paper and gauzed filter-based intake kits.Backed by a Lifetime Warranty. "
Manufacturer: True Flow
SKU: 382
Category: Automotive Accessories. Air Intakes

PREMIUM-GRADE CONSOLES Guaranteed quality—made by hand in the USA to exacting design/engineering standards Fine van "furniture" available in 4 colors For mini and full-size vans Hand crafted of solid wood to be extra durable, extra long lasting and extra strong. More stable—less chance of tipping and rocking. No annoying noise or rattling from vibration. Finest leather-grained upholstery matches original-equipment interiors. Consoles fit perfectly and are just the right height for maximum comfort. Sleek contours "go" with today's automotive interiors. 2 special cup holders securely hold virtually any cans, mugs, cups or bottles. Fully-padded armrest helps you relax on long trips. Large storage compartment under armrest conceals sunglasses, cameras, phone and other valuables. Heavy-duty piano-style hinges for ensured strength and long servicelife. Cassette/CD holder(s) keep music out of sight and out of the sun.
Manufacturer: Wolf
SKU: 10101-2007484

STAINLESS STEEL FIREWALL KITS Beautiful and far more resistant to rust and corrosion than chrome! Choose 3-pc. or one-pc. kit For '49-78 Volkswagen Beetles, Super Beetles and BajaBugs Mirror-like stainless steel firewall installs easily with pop rivets or sheet metal screws (not included). 3-piece Kit: Covers firewall and side panels. Choose louvered or non-louvered. 1-piece Louvered Firewall: Covers firewall only.
SKU: 10101-2005349

CARBURETOR MANUALS Cover theory, operationmaintenance, tune-up, troubleshooting, overhaul and more Hundreds of pages of "how-to" information
Manufacturer: Haynes Manuals
SKU: 10101-2006758

PORTABLE CELLULAR PHONE AC POWER SUPPLY/CHARGER This charger works as an AC power supply when plugged into phone's battery eliminator. Witha plug-in charger it becomes a charging unit. Plugs into any 110-volt AC outlet.
SKU: 10101-2009653