QUICK SHIFT KIT @ Automotive online store

"QUICK SHIFT" KIT Shortens shifter travel by 40% Easy to install. Kit includes housing and special ball spacer. Fits '54-78 Volkswagen Beetle, SuperBeetle, Vans and Karmann Ghia.
Manufacturer: EMPI
SKU: 10101-2001034

All new design with rounded contours to compliment today's truck interiors. Sunglass tray molded into the front section. Holds a wide variety of sunglass sizes, garage door opener or cellular phone. Two extra large adjustable front cupholders secure a wide variety of drink sizes. Concealed storage compartment. Seatbelt clip on the bottom of the unit holds secure to seat. Six-can removable cooler; with cooler removed the remaining cavity providesa extra large storage compartment. CD/cassette storage rack. Padded armrest hinges forward to provide a stable writing surface and storage for notepad and pen.Available in burgundy, charcoal, tan and blue.
SKU: 74040 901
Category: Miscellaneous

The ultimate in seating for your Wrangler or CJ. This classic European design provides comfortable lower back and thigh support at a down-to-earth price! Side bolsters help hold you in place in corners and on slopes. Check out these quality features: reclining back rest, rear mesh map pocket and an adjustable head rest. No drilling required for installation. Mounts on factory pedestal and seat runners. Factory matched fabric or vinyl colors guarantee a cooridinated look.Super Seat fitsdriver or passenger side, because the reclining adjuster can be mounted on the inside or outside. ** '97-'00 Wrangler need adaptor brackets #24212. Sold separately.
SKU: 24230 07
Category: Miscellaneous

PERFORMANCE-LOOK HOOD SCOOPS Smooth lines and gradual taper help turn any hood into a performance hood! Blackout screen on front panel is an exciting styling bonus Tough, molded black ABS plastic can be easily painted after some surface prep Muscle-car styling…even if you don't drive a muscle car! Scoops install easily with 3M™ tape included. No drilling required. Instructions included. Scoops have been tested to fiton flat hood of listed vehicle. Click on item SKU# for additional information.
Manufacturer: AutoVentshade
SKU: 10101-2006506

PROFESSIONAL-GRADE SHORT THROW SHIFTER Shortens shifter throw for maximum performance! Designed for the smoothest, fastest,most accurate shifts possible Super-tough billet 303 stainless steel shaft for best leverage and reduced throw Imported race car inspired and CAD designed/engineered as a direct bolt-in replacement. It's easy—all work is done from the topside, only simple hand tools are required. Yet the results are amazing! You'll "feel" the difference! This shifter is the best you can buy because it incorporates counterbalanced bottom end (for precise shifting), super-tight tolerances (the result of CNC machining) plus ultra long-lasting bushings or pivot locations. Also features billet aluminum bearing mount with trick aerospace polymer spherical bearing. 6061-T6 aluminum housing. Accepts virtually any knob (not included). Limited lifetime warranty.
Manufacturer: B & M
SKU: 10101-2001165

VENTED LOWER COWL ACCENT ABS show-chrome lower cowl accent brightens the front louvers on the gray or color matched front lower cowl Chromed ABS plastic. Easyto install—no drilling or modifications.
SKU: 10101-2006684

COLORED RECEIVER COVER Formed steel with high-gloss, powder-coated finish Protects receiver tube when not in use and goes great with the color-matched receiver hitches andcolored ball mounts (both sold separately) For all 2" receivers
Manufacturer: Curt
SKU: 10101-2004297

1-1/4" AND 2" RECEIVER HITCH MOUNTS For bikecarrier ZX200617X (sold separately).
Manufacturer: Acar
SKU: 10101-2007111

CUSTOM-FIT SLIP-ON MUFFLERS Add customsparkle plus reduce back pressure and restore lost power and performance due to a damaged/faulty muffler Chrome-plated, seamless muffler slips on easily to original-equipment pipes only For '78-97 Honda Gold Wing® models Polished chromed 16-gauge cold-rolled steel mufflers have mechanical all-steel louvered-baffle core insert that won't burn or blow out. Uses existing original hardware and/or included hardware where needed. Welded-on mounting tabs where required. Original muffler must be removed. 3" diam. body. Turned-down tip styles include cross-over balance tube. Includes instructions.
Manufacturer: Jardine
SKU: 10101-2006464

LOWER DOOR SKIN Repair rusted and dented door skin with this perfect-fit, die-formed and shaped door skin Heavy-gauge primer-coated steel prohibits rust Fits '54-79 Volkswagen Beetles and Super Beetles Available for driver's or passenger's side.Installs easily with screws, by welding or by riveting (welder or rivet gun not included). Finish with epoxy filler (sold separately) and paint.
SKU: 10101-2000449

"Putco Pop Up Locker Side Bed Rails have tie downs built in that pop up at four locations to provide maximum carrying strength up to 500 pounds. They pop down for a sleek,clean look."
Manufacturer: Putco
SKU: 167
Category: Automotive.Accessories.Truck Bed Rails

LOUVER COVERS Matched chrome accents add a custom touch One-pc.chromed ABS plastic covers hide dull black OEM side louvers For '88-97 Honda Gold Wing® GL1500 models Install easily with existing hardware. Include left and right sides. Quick, easy installation?no drilling required. Include instructions. Sold in pairs.
SKU: 10101-2003462

ALL-WEATHER RUBBER FLOOR MATS Ultra-durable rubber comes with manufacturer's 100-year warranty Unaffected by tough materials like gas, oil and mud Remains flexible even in extreme temperature Pliable to conform to the contours of your floor. Outer lip, deep channels and sculpted ridges hold more water, slush, grime and dirt for trouble-free cleanups.Anti-skid nibbed backing and positive retention screw help prevent mat slippage, even under gas or brake pedals! Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Highland
SKU: 10101-2007367

MAX GEAR SYNTHETIC GEAR OIL Provides maximum protection to heavy loaded gears. Reduces frictional wear and heat using an impact-absorbing, nonshearing molecular structure suitable for high-performance and OEM engines. Withstands high temperatureswhile racing or driving cross country. One quart.
Manufacturer: Royal Purple
SKU: 10101-2000798

CHROME-PLATED 8-LED BULLET-SHAPED MARKER LIGHTS Each custom-designed light features a pair of red and amber plastic lenses and 8 sealed-in LEDs Elongated die-cast metal housing Use as auxiliary turn signals, running lights or marker lights Show-chromed housing is approximately 2-3/4"L x 1-1/4" diameter. Mount on fairing, travel trunk, saddlebag, fender…any spot that needs a little something extra. Rounded impact-resistant plastic lenses (a pair of red and a pair of amber) with the sealed-in LEDs extend approximately 1/2" beyond housing. If desired, the unused lensescan be positioned at other points on bike after drilling 1" mounting hole. 3 color-coded pigtail wires. 3/8"H pedestal mount has removable 8mm hollow mounting stud to hide wiring. Mounting hardware included. Drilling required to install. Sold in pairs.
SKU: 10101-2003427

TECHBOOK REPAIR MANUALS Provides everything you need to know--whether you’re restoring vehicles from the ground up…or simply keeping the car in top condition. Provides information on welding, painting, fiberglass repair, body straightening, damage/rust repair, interior restoration, detailingand much more. Over 200 pages.
Manufacturer: Haynes Manuals
SKU: 10101-2006772

LUND® ECLIPSE™ HEADLIGHT COVERS Show off your PT Cruiser with showroom headlight covers! Protect lights from getting damaged Constructed of high-impact smoke-colored polymer Match the contours of your headlights perfectly Add style and protection. Easy to install. No drilling required. For show and off-road use only. Check local laws for restrictions before ordering.Sold in pairs. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Lund
SKU: 10101-2009339

LOWER FAIRING CORNERING LIGHT KIT Ride safely! Kit produces a steady light from lower fairing when turn signal is activated…shuts off automatically when turn is complete For '88-97 GL1500 models Mount in blank left and right housings on fairing lower (drilling of fairing and cutting of blank panels required). Includes 2 steel housings, 35-Watt bulbs, wraparound lenses,gaskets, wires, replays, springs, hardware and instructions. Plugs into original harness. Not for '98-2000 models. Replacement bulb sold separately.
SKU: 10101-2003468

HEAVY-DUTY SHOCK ABSORBERS Over-sized 1"- and 3/16"-diam. hardened steel piston for greater resistance to vibration and sway, greater stability and ride control 20% more fluid capacity, compression and recoil area than 1" shock Premium all-weather fluid for smoother, more stable control. Smooth cylinder walls for less friction. Chrome-plated, corrosion-resistant steel body. Not for vehicles with struts. Limited (Ownership Duration) Warranty:An exchange of shock absorbers will be made (not including installation costs) if heavy-duty shock absorbers wear out while the original purchaser owns vehicle on which shocks were originally installed. Warranty does not apply to vehicles used for commercial purposes.
SKU: 10101-2006130

CHROME-PLATED NECK COVERS Bright custom styling Feature decorative raised teardrop accents (3 per cover) For '98-2000 Honda VT750 Shadow "ACE" and Deluxe cycles Mount easily over left- and right-side original black plastic covers with self-adhesivebacking. Sold in pairs.
SKU: 10101-2006676

MOLDED SPONGE RUBBER WEATHERSTRIPPING FOR QUARTER WINDOWS Replaces original perfectly Seals gap between front doorand rear quarter window Solid rubber. Easy-to-cut. 16"L. To receive a weatherstrip sample, call 1-800-603-4383.
SKU: 10101-2008681

SPACE MASTER SOFT-SIDED CARGO ORGANIZER Organizes gear in your vehicle and then lets you carryit to your destination Expands to 25" x 15" x 10" size to hold all your belongings Includes 3 large main compartments and 7 side pockets Eliminates tedious loading and unloading! Long-lasting, heavy-duty nylon. Bottom hook/loop strips prevent bag from sliding around in vehicle. Built-in carry handles. Folds compactly when not needed.
Manufacturer: Highland
SKU: 10101-2007780

PLASTIC CLEANER, PROTECTANT AND POLISH Cleans as it polishes! The most effective polish/cleaner for your cycle…anything made of plastic Great for face shields, helmets, goggles, fairings, saddlebags, eyeglasses, household items, laminated surfaces, etc. Safe and nonabrasive—won't scratch delicate surfaces. Finish looks better than ever…without smears or smudges. Seals plastic "pores" against debris, oil, scratches and yellowing. Simply spray on and wipe! No rubbing or buffing as with ordinary cleaners. No waste or mess. Aerosol applicator prevents dripping,leaking or clogging at the tip. Anti-static properties repel dust and dirt.
Manufacturer: Plexus
SKU: 10101-2000740

FRONTSKID PLATE 2-piece plate protects steering and differential Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Superlift Suspension
SKU: 10101-2004931

MINI HALOGEN DRIVING LIGHT KIT WITH FAIRING-MOUNT SKIRT Long-range 50-Watt lights with bullet-shaped chromed metal housings (approximately 2-3/8" diameter, 3-5/8" long overall) and clear glass lenses Chromed steel lower-fairing mounting skirt is custom fit…looks factory installed Adjustable bezel wtih molded-in visor Skirt mounts under fairing at existing mounting points with included chromed hardware. Lights mount to skirt. Kit includes replaceablebulbs, illuminated rocker light switch (mounts to fairing and requires cutting or auxiliary switch box), preassembled, color-coded wiring harness (fits inside fairing to look factory installed), relay, in-line fuse, mounting/wiring hardware and instructions.
SKU: 10101-2003520

POLYURETHANE SWAY BAR BUSHINGS Polyurethane bushings are stronger, more durable than rubber, resist extreme heat, cold and friction that can weaken stock parts. Kit includes one pair of bushings with matching heavy-duty brackets. Bracketsare plated to resist rust and feature slotted holes for universal mounting, simple installation. Choice of brackets: 1-1/4" H x 3-5/8" W or; 1-5/8" H x 4-1/4" W.
Manufacturer: Dee Engineering
SKU: 10101-2005918

TRAILMAX™ CONSOLES Fully padded lid with built-in lock (key included) Large interior storage compartment 4-can beverage cooler Oversized beverage holders (front inserts remove for easy clean-up) Multiple trays for convenient storage of coins, cell phone, GPS unit Built-in writing board slides out of locking armrest console lid [A] TrailMax™ Console. Strong and durable injection-molded ABS plastic housing. All the great features above in your choice of colors to complement factory interiors. 24"L x 10"W x 13.5"H. Complete instructions and hardware included. Will not fit in 1997-up Wrangler TJs. [B] TrailMax™ Pro Console. Comes with "gotta-have" upgrades from our standard console. Front-mounted outlet provides power for your 12Vhand-held spotlight, electronic toys, etc. Integrated interior light in padded console lid automatically goes on when lid is opened. Always-handy first aid kit is also included. 24"L x 10"W x 13.5"H. Complete instructions and hardware included. Will not fit in 1997-up Wrangler TJs.
Manufacturer: Bestop
SKU: 10101-2007489

SEAT BELT SHOULDERPAD Smooth genuine black leather with colorful, take-notice design Riding comfort never felt so good or looked so hot! Prevents seat belt from chafing your neck Matching steering wheel cover sold separately.
SKU: 10101-2006854

DELUXE DASH REPAIR KIT Repair cracks, splits in hard vinyl dashes yourself and save. Deluxe kit includes: seven 1/2-oz. bottles of color compound; grain compound; vinyl cleaner; clear vinyl finish; clear hard plasticrepair compound; grain papers; spatula; color guide; instructions. Chemical air dries. Iron not included in deluxe kit.
SKU: 10101-2000715

PISTON RING SET Available in standard size onlyFor air-cooled Volkswagen Sedans and Transporters
Manufacturer: GRANT PISTON RING
SKU: 10101-2005226

CUSTOM-FIT STAINLESS STEEL DOOR EDGE GUARDS Dress-up accents protect door edges against chips, nicks and scratches Choose polished finishor durable, bonded-on black PVC finish Fit beautifully and won't sag or slip like universal edge guards. SAE 51434 stainless steel guards won't rust or corrode. Install in minutes. Hold tight without drilling or glue.
SKU: 10101-2009152

AEROSTYLE GRILLE GUARD Protects grille from on-road debris 3-1/2"W x 2-1/4"H crossbars with 5/16" thick side plates. Keeps a new vehicle looking good and its resale value high. Adds an aerodynamic oval touch to an older model. Includes mounting provisions for auxiliary or off-road lights. Modular trouble-free assembly. Some drilling required. Includes hardware and instructions. NOTE: SKU numbers ending in F arefactory shipped and may take a little longer to reach you.
Manufacturer: Grizzly
SKU: 10101-2004915

REAR AXLE NUT COVERS Showroom chromedcover-ups and decorations! Shock mount covers and swing-arm accents sold separately Chromed CNC machined billet aluminum covers fit over left and right side axle nuts. Included set screws secure covers and allow quick removal as needed. Sold in pairs only.
SKU: 10101-2006692

Yokohama RY103 Tire priced from$116.00 to $183.00.
Manufacturer: Yokohama
SKU: Yokohama RY103 Tire
Category: Automotive Parts and Accessories Parts Tires

INFLATE 'N SEAL™ SEALANTREFILL For use with Inflate 'n Seal™ one-step tire repair and inflation system 12-oz. bottle.
Manufacturer: Interdynamics
SKU: 10101-2004015

PERFORMANCE ACCESSORIES™ BOLT PLATE ADAPTERFor swing - away tire carriers.
Manufacturer: Perfornance Accessories
SKU: 10101-2004746

STEEL VALVE COVERS WITH "350" OR "454" LOGO Adddress-up styling and customized touch Choose low-rise covers or high-rise covers (for engines with high-lift rocker assemblies) For '58-86 Chevrolet engine Baffled and designed for perfect fit. Note: Require push-in oil breather cap, oil filler cap and gaskets (not included). Sold in pairs. Check local emission laws before ordering.
SKU: 10101-2005528

EXTEND-A-TRUCK™ HITCH Easily transports 10- to 18-ft. loads that are toolong to fit safely in pickup. Supports loads up to 350 lbs. and up to 4 ft. wide. Makes it easy to move large items such as extension ladders, lumber, canoe, drywall, sailboat, etc. Prevents damage to bed. Installs in seconds in Class III hitch with 2" receiver. Height is adjustable up to 6-1/2". Tie-down points on outside of horizontal arm.
Manufacturer: Darby
SKU: 10101-2004447

REPLACEMENT FENDERS FOR CLASSIC VW Repair rusted and dented fenders with perfect-fit, die-formed and shaped replacement fenders Heavy-gauge primer-coated steel prohibits rust Fit '54-79 VolkswagenBeetles and Super Beetles (except where noted) Easy bolt-on installation. Finish with epoxy filler (sold separately) and paint.
SKU: 10101-2000331

TAILLIGHT ASSEMBLY Replaces OEM #68008-73A Meets or exceeds DOT standards For '73-99 Harley-Davidson® Sportsters and Big Twin models Complete assembly includes backing plate with chromed outer rim, wiring harness, socket, 12-volt bulb and tough red acrylic lens with clear section on top for license plate illumination. Doesnot fit FXWG or FXST models.
SKU: 10101-2003571

WarnRock Crawler bumpers incorporate many years of severe off-road experience to deliver a tough, durable and uniquely designed Bumper. Features of the front bumper include tapered ends for increased approach angles, welded eyelets to mount D-Rings and pre drilled holes to mount auxiliary lighting. The rear bumpers have a 2" receiver for towing or mounting accessories. Warn bumpers are laser cut form 3/16" steel, then CNC formed, robotic welded for precise fit and finally powder coated for durability. **Does not include winch mount plate or D-rings**
SKU: 12022 402
Category: Miscellaneous

25,000-LB. GOOSENECK HITCH The only way to tow large trailers with gooseneck attachment 25,000-lb. gross towing weight capacity, 6,250-lb. vertical loadInnovative tubing with super-tough finish (withstands 500-hour salt-spray test) 2-5/16" ball included. Mounts easily in existing fifth wheel rails. If rails are not already installed, order required installation sold separately (47ZX2263X).
SKU: 10101-2004376

NYLON LOOP TWIST CARPET BY THE YARD Coordinates door panels, trunk and cargo area with custom-tailored floor carpeting Completes the look! Tough high-pile tightly-locked twist weave stands up to hard wear. Durable long-lasting nylon. 39"W. Sold in completeyards only. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. To receive a color fabric sample(s), call (877) 927-7427 and request the color(s) you would like.
Manufacturer: Newark Auto Products
SKU: 10101-2007227

Don't let that mess get to your carpet! Great all season weather protection. Rain, mud, snow and other muck can't escape the deep ridges and channels of WeatherTech mats. Made of durable, highly flexible rubber, and now available in 3 great colors! The valleys and channels hold up to 1.5 quarts of water before spilling over. When it comes time to clean them up, get out the garden hose, because the non-stick finish makes it a breeze. For CJ, Wrangler Jeep vehicles, Suzuki, Amigo and Sidekicks. Some trimming may be required to fit. New gray and tan mats do not have the red stripe trim.
SKU: 14056 009
Category: Miscellaneous

Mimics shape & look of optional step on '97-'00 Wranglers, but made of rugged aluminum. Supported by tough steel support brackets. Molded step area is heavy-duty non skid pattern. Sold in pairs, they bolt directly toframe on preexisting holes. '99-'00 vehicles will require drilling. Will not fit on 2002 and newer Wrangler.
SKU: 12524 01
Category: Miscellaneous

Our most popular caps areback! Available in 7 great colors. Great hues with bold Jeep logos and contrast stitching. Easily adjusted to fit. Colors: 00-Black, 01-Red, 02-Olive, 03-Blue, 04-Forest, 05-Natural, 06-Khaki
SKU: 15116 03
Category: Miscellaneous

OFF-ROAD ALTERNATING FLASHER LIGHTS KIT WITH SMOOTH LENSES Sealed beam lenses are smooth for long-distance illumination Replacement sealed beams sold separately Powerful 4-1/2" diameter sealed beam lightsMounts easily to front end. Kit includes 2 lights, alternating flasher and hardware. For 12-volt negative-ground systems. Available in 3 colors.
SKU: 10101-2003490

CHROME-PLATED CRANKSHAFT FAN BELT PULLEY Brilliant chrome plating is polished to a mirror finish adding sparkle to your engine For 1955-1985 Chevrolets Chromed steel pulley maintains belt alignment. Easy, bolt-on installation. No modifications required. Will not fit harmonic balancers with dowel pin retainers. Note:Pulley diameter may vary slightly from original and require a different size belt. Diameter listed is overall outside diameter of pulley.
SKU: 10101-2005210

SEAT RELEASE HANDLE Handle attaches directly to the broken post on the driver or passenger side HELP! Hard-to-Find Parts saves you money by offering a replacement handle only, not the entireassembly Quick and easy installation NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2007082

NOSZLE™ DIRECT-PORT EFI NITROUS SYSTEM Now you can install an individual-cylinder nitrous system on your Mustang GT 4.6L without drilling a single hole in your intake! Injects additional fuel where it was designed to be, offering the HUGE HORSEPOWER GAINS of "wet" nitrous oxide injection without the dangers of "hosing" Adjustable 100 to 125 horsepower gains without modifications…monster 300 horsepower gains possiblewith some modifications (see note below) Safe! Easy! Powerful! System precisely atomizes fuel injector fuel and enrichment fuel for MAXIMUM POWER (small atomized droplets evaporate more easily). Spray is aimed directly at inlet valve. Unique spray geometry prevents the spray bounce-back into the intake plenum that can cause cylinder-to-cylinder fuel variations. No fuel puddling that can cause backfires and damage. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Calibration. Jetting included for 100-125 additional horsepower. Flexible high-pressure hoses allow jets to be easily retrieved from nozzles. Individual cylinder calibration compensates for intake manifold and cylinder-head design variations. Easy Plug-and-Play Design. Nozzle fits between injector and manifold. No drilling, reaming, welding or gluing of manifold. No need to remove manifold. No bending of tubes—2002 NHRA-approved flexible high-pressure hoses accommodate any engine configuration. Fits ALL fuel injectors: Delphi, Bosch, Siemens, Magnet Marelli, Sagem, Keihin and Denso. Complete. Includes 8 NOSzles, electronic wide-open throttle switch harness, 10-lb. nitrous bottle, nozzle, solenoid, brackets, jetting, RPM window switch (safeguards against rev-limited-induced backfires), fuel/nitrous lines, comprehensive instructions. Some drilling required to install components. Please Note: Gains up to 125 HP can be achieved with stock engine components/parts. Higher gains (up to 300 HP) require upgrades like forged pistons and stand-alone fuel system.
Manufacturer: NOS
SKU: 10101-2005730

BILLET OIL FILTER ADAPTER Locate your oil filter inalmost any position Convert to a remote or premium aftermarket oil filter for engine protection Allows use of a spin-on filter Billet aluminum adds a finishing touch to engine
Manufacturer: Dee Engineering
SKU: 10101-2002800

HIGH-BEAM AND WARNING LIGHT FLASHER Converts high beams or warning lights and handles up to 20 amps (10 amps per side). Solid-state circuitry maintains constant flashpattern. Includes flasher, terminals, wiring, switch, instructions. For 12V systems.
Manufacturer: North American Signal
SKU: 10101-2003499

TIGERTOP™ Preshrunk extra-heavy-duty fabric with flexible vinyl coating for long life and good looks Limited 1-year warranty Can be used 4 ways for the greatest riding comfort Hard-to-find tops for older off-road vehicles! Durable .040 vinyl windows approved in all states for perfect visibility. Heat-sealed windows and 1-pc. single seams for snug year-round weather-tight protection and comfort. Extra-wide removable doors with curved zippered windows that roll out of the way and store neatly. Rear window has covered zipper to keep cold air out and heat in…rolls up and stores neatly inside. Adjustable bow release bracket lets you raise or lower top in minutes. Secures easily to the windshield. Front hooks into the groove on windshield and formsa weather-tight seal—no pushing, no threading, attaches with snaps. Complete with doors, bow, all hardware and instructions for trouble-free installation. Note: SKU numbers ending in F are factory shipped and may take a little longer to reach you. The Bestop Closer Look Guide will give you detailed information about Bestop's most popular Jeep soft tops.
Manufacturer: Bestop
SKU: 10101-2002728

TURN SIGNAL SWITCH ANDCOMPONENTS FOR 1946-1995 JEEP VEHICLES NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2005014

CONVERTIBLETOP BOOT STORAGE BAGS Protects your expensive convertible top boot from dirt and damage when not in use Durable black vinyl with soft fleece backing prevents scratches
Manufacturer: Newark Auto Products
SKU: 10101-2002710

REVERSIBLE CLASS III AND IV HITCH BALL MOUNTS Raise orlower hitch ball to proper level Fit all 2" square Class III and Class IV receivers and box hitches Black finish
SKU: 10101-2004324

MARKER LIGHT MOUNTING BLOCK Chrome-plated, 2-pc. die-cast block with hollow assemblybolt For mounting of any auxiliary light on 1/2"OD or 5/8"OD rails
SKU: 10101-2003413

PT CRUISER TAIL LAMP COVERS Replace your stock look with chrome ABS plastic tail lamp ring covers Converts a 2 color, 2 piece tail lamp into high-tech 3-piece look Designedto add a high-chrome look to your PT Cruiser exterior Covers install easily with 3M™ tape. Set of 2. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Autotecnica
SKU: 10101-2009443

AC - HIGH-PRESSURE CUT-OUT SWITCH KIT Protects compressor and air conditioning components from excessive pressure during R-12 to R-134a conversions Cuts off compressor at excessive pressure (398 psi), allows compressor to resume operation when pressure drops to safe 315 psi For most '78-'93 cars, vans and pickups Kit comescomplete with everything needed to install this system in most '78-'93 vehicles with 3/16" high-side port: 90° steel port adapter and high-pressure switch, electrical pigtail harness with boot and instructions. Easy to install.
Manufacturer: CLASSIC TOOL DESIGN
SKU: 10101-2002824

Dusters, Tonneaus - call them what you like, they provide protection and a clean smooth look. Available in a wide assortment of sizes and factory-match colors. Models are available for Jeeps without soft tops, Jeeps with Supertops and Jeeps with factory tops. Quick to cover and quick to remove. Easy installation - attaches to a track mounting rail. Protects from mud, rain, etc. Looks great with a Bikini Top and a Windjammer. Versions available for all CJ7/Wrangler vehicles from '80-'00. **Duster deck covers will not fit some CJ7 models with a roll bar assembly**#11154.xx for '97-'00 Wrangler with factory soft top #11157.xx for '97-'00 Wrangler with hard top #11054.xx for '92-'95 Wrangler with factory soft top #11058.xx for '92-'95 Wrangler with hard top #11056.xx for '92-'95 Wrangler with Supertop #11051.xx for '87-'91Wrangler with factory soft top with 1/2 steel #11057.xx for '80-'86 CJ7 and '87-'91 Wrangler with hardtop #21051.xx for '80-'86 CJ7 and '87-'91 Wrangler with Supertop
SKU: 11051 10
Category: Miscellaneous

LED-ACCENTED LICENSE PLATE FRAME LEDs with red lens can be used as either an auxiliary brake light or as a running light to help improve cycle's visibility for safer nighttime riding Showroom chrome-plated heavy-duty die-cast metal frame has approximately 1/2"W sides, 5/8"H bottom, up to 1"H top and is approximately 1/4" thick overall Top of frame is accented with a 12-LED light bank (2 rows of 6) Lights are housed in a removable 1" x 3-7/8"L x up to 3/4"D chrome-plated metal housing witha 1" x 3" red plastic lens. Accepts 4" x 7" license plates. Mounting holes are 5-3/4" and 2-3/4" apart center to center and may require drilling of license plate and existing mounting bracket. Frame mounts using existing hardware and has approximately 12" of pigtail wiring for easy hookup.
SKU: 10101-2001742

BACK-UP BULBS Back up safely and confidently! Choose 20-watt back-up light/warning alarm combination or 50-watt back-up bulb These warning systems areas easy to install as changing a light bulb. No wiring required—simple plug-in installation. Bright halogen bulbs illuminate rear view for safer backing up at night.
Manufacturer: Design Tech
SKU: 10101-2001378

XENON SUCTION-CUP-MOUNT STROBE WARNING LIGHT Plugs easily into cigarette lighter socket Replacement Xenon flash tube sold separately Producesapprox. 60 flashes per minute in all directions 6"H x 4-1/2" diameter rubber suction base. Includes 8-ft. cord. Fits easily in glove compartment. Corrosion-proof high-impact plastic dome. Low current draw. For 12-volt negative-ground systems.
SKU: 10101-2003482

REAR RACK ORGANIZER 3 big zippered pockets with foam base organize and protect clothes, thermos, camera, tools and other valuables Largecenter area accommodates a cooler or box (not included) Weather-protected fabric organizer attaches to any standard rear rack—8 adjustable straps included Webbing straps hold tools or act as cargo tie-down points.
Manufacturer: Classic Auto Accessory
SKU: 10101-2007176

Dunlop Radial Mud Rover Tire priced from $86.00 to $168.00. The Dunlop Radial Mud Rover is Dunlop'sultimate off-road tire. The super aggressive lug pattern delivers maximum forward and side grip, and the wide open pattern provides excellent self-cleaning capabilities. The alternating shoulder lug scallops increase lateral grip, and the variable pitch tread design breaks up noise frequency cycles for a suprisingly quiet ride. The Radial Mud Rover is available with outlined white letters with black serrated letters on the reverse.
Manufacturer: Dunlop
SKU: Dunlop Radial Mud Rover Tire
Category: Automotive Parts and Accessories Parts Tires