DIAMOND-TREAD STEEL REAR STEP BUMPERS @ Automotive online store

DIAMOND-TREAD STEEL REAR STEP BUMPERS Diamond-tread surface for safe, nonslip footing Tough rear-end protection, add-on towing capability and the convenience of a step—allin one custom-styled unit Choose rear step bumper for full-size pickups, vans and SUVs or compact and mini pickups Massive welded bumper meets Federal V-5 safety specifications. Heavy-gauge steel bumper face, step plate and black hitch plate. Set includes license plate lights, steel mounting hardware and instructions. Corrosion-resistant finishes. All have black hitch plate. Cannot be shipped express.
SKU: 10101-2004736

"CC" AND "DD" TRAILERLIGHT CONVERTER KITS Provide trailer with 3 tail-light functions—running, stop and turn signal Mount inside vehicle For Class I, II, III and IV hitches
Manufacturer: Acar
SKU: 10101-2004477

Protect your investment with these unique locking nuts. Similar to the wheel lock principle, a special socket is required to install or remove the locking nut to help prevent theft. Each set includes one socket and two nuts.
SKU: 97003 01
Category: Miscellaneous

PRECISION SHORT-THROW MANUAL SPORT SHIFTER B&M for the edge in looks and performance! Engineered using the strongest materials available for performance you can count on year after year Super-tough CNC-machined 303 billet stainless steel shafts provide the best geometry for smooth, precise shifting...every time Designed to fit/function properly with car's factory boot, insulation and console surround Easy to install with simple hand tools Quality engineering and input from some of the world's top racers and tuners make these shifters theprofessionals' choice for the street! Includes instructions. Mfr. million-mile warranty.
SKU: 10101-2001175

40-PC. FUSE KIT WITH TESTER Just put this handy little kit in your glove compartment—you'll always be ready for a blown fuse! Includes 40 top-quality fuses: 8 small boxes,each containing 5 of the most popular 3-, 5-, 7.5-, 10-, 15-, 20-, 25- and 30-amp blade fuses. You'll also get test/puller with lamp that glows green to indicate a good fuse so you won't waste time and money replacing a working fuse. 2 choices: for standard ATO sizes and for mini sizes.
Manufacturer: Littlefuse
SKU: 10101-2005171

HANDLEBAR-MOUNT SPOTLIGHT Produces 70,000 candlepower AND doubles asa hand-held spotlight when removed from bracket. The ideal travel companion for your hunting, fishing or camping trips…great for nighttime road emergencies Approximately 4-1/2" diameter black plastic housing with 5-1/2 ft. coiled cord (cord stretches to 9-1/2 ft.). Hooks up directly to your 12-volt battery source. Mounting bracket included.
Manufacturer: C M P
SKU: 10101-2003450

The Sunport is not just a single top. It is a modular system that gives you more options than any other top on the market! Constructed of two separate pieces, the Sunport allows you to independently roll up the back windows, take off the cockpit cover, or take the entire top off for open-air cruising. Whatever the weather or your mood dictates!It's the ultimate in versatility! Requires one screw-on channel (supplied) but otherwise uses your existing hardware.
SKU: 61036 09
Category: Miscellaneous

REPLACEMENT SHIFTER KIT Perfect for restorations Maintains stock look while restoring smooth, like-original shifting. Kit includes everything needed to replace old or worn-out shifter: shift lever, housing, boot, plastic knob and spring. Parts install easily and fit perfectly—no modifications required. For all air-cooled Volkswagen Type I Beetles and KarmannGhias through '67.
Manufacturer: EMPI
SKU: 10101-2001164

ULTRA-THIN TRANSMISSION OIL COOLER Only 3/4" thick—mounts in front of radiator Agitator fins in copper tubes for maximum heat dissipation Without auxiliary transmission oil cooler, you vehicle can overheat thetransmission, radiator and engine, causing expensive damage. These oil coolers feature a high-capacity inner agitator. As hot oil flows through precisely spaced openings, the agitator revolves clockwise and counter-clockwise, ensuring double heat extraction. Oil temperature is dramatically reduced. Includes line adapter to eliminate cutting transmission oil lines. Also comes with universal mounting brackets, high-temperature/pressure hose, hardware, instructions. Coolers can be transferred from one vehicle to another. Note: Installation in '83-95 Ford vehicles requires adapter fittings (sold separately). How to Order. Determine total weight of vehicle only, or of vehicle plus trailer. Order by total weight.
Manufacturer: DERALE
SKU: 10101-2000991

HIGH-PERFORMANCE CAMSHAFT Choose from 2 performance levels Camshaft available individually or in a kit with valve lifter High-volume oil pump for camshaft available separately Here's the fast, easy way to add torque and power to your Volkswagen.Great for street use because camshaft doesn't require high RPMs and idle to perform properly. Made of top-quality materials for accuracy and long, dependable service. For '61-79 Volkswagen 1200cc, 1300cc, 1500cc and 1600cc air-cooled engines. NOTE: '71-79 vehicles REQUIRE early-style oil pump sold separately. Not legal for sale or use on California pollution-controlled motor vehicles.
SKU: 10101-2005268

SUPERTOP® FOR JEEPS WITH FACTORY FULL STEEL DOORS Limited Time Offer: Bestop® Mail-in Rebate! Buy a Supertop for Wrangler models and get a $50 REBATE from Bestop! Please use the link below for complete details. Offer good on purchases from 8/1/05 through 12/30/05. Available with clear or tinted rear side windows and rear curtain Patented Belt-Rail™ channel attachmentsystem—eliminates drilling for snaps! A complete replacement Jeep soft top that uses your existing factory full steel doors. Bestop-exclusive bow-tensioning system for smoother operation and easier installation. Replaceable rear side windows and rear curtain window zip out for an open-air ride. Scoop-counted, nylon-coiled #10 YKK zippers. Instructions, all new galvanized, powder-coated hardware plus free installation video included. The Bestop Closer Look Guide will give you detailed information about Bestop's most popular Jeep soft tops.
Manufacturer: Bestop
SKU: 10108-2002750

CHROMED STEEL LOUVERED AIR CLEANER Choose from 2 custom-fit carburetor sizes Replacement filter element sold separately For '54-74 Volkswagen Beetles, Super Beetles and Transporters Increases airflow for improved performance. Washable foam element. Compact—approx. 5-1/2"W x 2-7/8"H overall. 2"H cover has eleven 4-louver rows. Offset base, smogtube and clamp-style mount. Check local emission laws before ordering. NOTE: Not legal for sale or use on California pollution-controlled motor vehicles. This product is intended for off-road or racing use only and is not intended or applicable for highway use.
Manufacturer: EMPI
SKU: 10101-2005368

TOURING AND CRUISER BIAS-PLY TUBELESS TIRES Built to take the loads and handle the roads! "H" tires rated for speeds up to 130 MPH Advanced casing technology combines low rolling resistance and cooler running for extended tire life and more mileage Multi-arc tread contour for light/neutral turn in and better cornering stability. Sequential tread pattern ensures terrific wet and dry traction plus minimum noise. The LI (Load Index) inthe listing is a numerical code associated with the maximum load a tire can carry (see Load Index Chart below) and a letter rating indicating the maximum speed at which a tire can carry a load corresponding to its load index (see Speed Rating Chart below). Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. LOAD INDEX (LI) CHART Provides the maximum load a tire can carry. It's given in pounds for each tire (based on a tire inflated to the psi indicated on the sidewall). Add front and rear load ratings to determine the TOTAL LOADING RATING for cycle. LOAD INDEX (LI) CHART LI LBS 48 397 54 467 56 494 57 507 62 584 69 716 71 761 74 827 76 882 77 908 80 992 81 1019 83 1074     SPEED RATING CHART CODE MAX. SPEED H 130 MPH    
Manufacturer: Avon
SKU: 10101-2010025

FLUSH-MOUNT ROTOR COVER LIGHT KITS Add auxiliary running lights to each rotor cover for a factory installed look Choose 6-light or 4-light kit For '88-2000 Honda Gold Wing® models Include 2 chromed light-mounting brackets (mount flush to rotor covers) and either 6 or 4 lights. Lights have 1-3/4"D chromed metal housings. 1-3/4" x 1-1/8" diamond-shaped amber impact-resistant lenses plus 12-volt replacement single-filament bulbs. Installation requires removal and drilling of rotor covers. Include mounting/wiring hardware and instructions. Replacement bulbs for flush-mount light kits sold separately. 6-Light Kit. Mounts to original '98-2000 style rotor covers or to '98-2000 style replacement rotor cover replacement kit. 4-Light Kit. Mounts to original '88-97 style rotor covers or to '88-97style rotor cover replacement kit.
SKU: 10101-2003523

PET PAD SEAT PROTECTORS Keep your seat clean and dry and your pet comfortable Attach to seat with adjustable straps Easy to clean—hose off and hang up to dry Pet Pads feature a PVC-backed waterproof 420-denier polyester top, 210-denier rip-stop nylon backplus soft and high-loft DuPont® Hollofill insulation in between. Comfortable for your pet…or your kids after a long day at the beach or soccer game. Entire Pet Pad is bound with 2" black webbing, double-needle sewn to withstand lots of abuse. Click on item SKU# for additional information.
Manufacturer: Covercraft
SKU: 10101-2006900

The finishing touch for your vehicle. Smooth fitting tailored Spare Tire Covers are available in many factory-matched colors. Looks great with a matched Bikini Top too! Order by tire diameter for the best custom fit. 5 sizes and most factory match colorsto choose from.

CHROME-PLATED HEAVY-DUTY STEERING SHAFT Heavy-duty 7/8" steering shaft for sand rails with roll bars—a must when off-roading plus it adds a bright custom touch For your Dune Buggy Type I chassis 3-bolt flange Shaft support with bearing (sold separately) ensures easiest installation of steering shaft. Shaft support with bearing requiredwhen you have a full roll cage. 60" shaft (cut to length).
Manufacturer: EMPI
SKU: 10101-2006058

STREET TREAD MOTORCYCLE TIRES (TUBE/TUBELESS) Designed for use as a tubeless tires (on mag-style wheels) or tube-type tires (on spoke wheels) High-speed rated tires ("H" rated tires withstand speeds up to 130 MPH) Choose from 2 front and 2 rear tread styles Tubeless tires can be used on tube-type wheels with an inner tube and rim strip (sold separately). Meet or exceed DOT highway specifications. 2-ply nylon cord construction with4-ply rating (load range "B") or 4-ply construction (load range "B"). Note: Ply figures given are ply ratings ("PR" as shown on tire), not actual ply construction, except for Styles G and H, which are ply construction. How To Order. Before ordering, check tire size found on current tire sidewall or as listed in owner's manual, then order the same size tire. If ordering a wider tire, be sure to allow sufficient clearance and check the manufacturer's recommended rim widths (RRW) and load ratings (LR) to help determine which tire is best. (RRW) Given in inches. (LR) Given in pounds for each tire (based on a tire inflated to the psi indicated on sidewall); add front and rear load ratings to determine TOTAL for cycle. (SIS) Standard inch sizes Tire Width x Rim Diameter. (MS) Metric sizes Tire Width in millimeters/Sidewall Height as a percent of tire width H (tire speed rating) Rim Diameter in inches. (A) 4-ply tread with 3-ply sidewall (B) 3-ply tread with 2-ply sidewall (C) 2-ply tread with 2-ply sidewall
Manufacturer: Cheng Shin
SKU: 10101-2003943

RACER STAINLESS STEEL GRILLE INSERT Featuring NeveRust™heavy-gauge stainless steel with bright mirror finish Custom-fit insert made for looks and performance Clamps on easily over existing grille—no drilling, no cutting, no need to remove any grille component Bold elliptical pattern for maximum airflow! Installation requires only the stainless steel hardware and hex key included. Limited lifetime warranty.
Manufacturer: Putco
SKU: 10101-2004857

POLYESTER BUCKET SEAT PADDING KIT FOR VOLKSWAGEN® Kit for one front bucket seat Includes everything needed to restore like-new comfort. 1" thick resilient polyester bottom and back-rest cushions, carpeted underlay spring cover, hog rings, instructions. Some trimming may be required.Buy 2 kits for both front seats.
Manufacturer: T M I
SKU: 10101-2007070

DELUXE BUCKET TOURING SEAT KIT Replaces damaged or worn stock seat with comfortable, great looking touring seat! Available in 4 colors to match original seat color For '75-87 Honda Gold Wing® GL1000, GL1100 AND GL1200 models Saddles are deeper and wider than on standard seats for more comfort, support and less forward sliding. Passenger's saddle is contoured to allow extra leg room. Mounts to original existingseating pan. Bucket saddles are designed for greater support and an easier ride. Features top leather-look marine-grade vinyl upholstery. Super-tough upholstery will survive long exposure to sunlight, rain and temperature extremes. One-piece molded polyurethane foam cushion—precise-density foam won't break down or weaken even after prolonged use. Good-looking diamond-pattern upholstery is double-stitched with no-rot thread and is attached to cushion to simplify seat installation. Seat installs on original-equipment seat base-pan—no special tools needed. Mounting instructions included. NOTE: Seat cannot be returned for credit, refund or replacement if altered, modified, abused or damaged by customer. Cannot be shipped express.
SKU: 10101-2007011

FAIRING LOWER/ENGINE AIR SCOOP PANEL Paintable, molded of super-strong, high-impactblack ABS plastic to original specifications Front insert panel sold separately For Suzuki and Yamaha sport bikes Available for left or right side. Mounts to cycle using existing hardware. Some drilling of replacement part required.
Manufacturer: Maier Mfg
SKU: 10101-2006719

SHORTOVERRIDERS (BUMPER GUARDS), BRACKETS AND BOLTS For '52-67 Volkswagen Beetles and Super Beetles Short overriders (bumper guards) are a pair of Euro-style guards with a lower profile than originals and no tube holes. Bolt easily to front or rear bumper face bar. Some drilling required for rear bumper installation. Bumper brackets for complete bumper assembly or bumper face bar replace originals perfectly. Choose pair of brackets in chrome-plated or black painted finish. Chrome-plated bumper bolts are a package of 4 for use on complete bumper assembly or bumper face bar.
SKU: 10101-2009803

DASH PAD COVER Shipped separately from factory. NOTE: SKU numbers ending in F arefactory shipped and may take a little longer to reach you.
SKU: 10101-2008204

RECEIVER MOUNT FOLD DOWN BIKE CARRIERS Heavy-duty 2" tubular steel is powder-coated for superior corrosion/rust resistance No more stretching to load and unload your bikes! Single clamp securely holds and simplifies mounting and removal of 2 bikes. Clamp is lockable to prevent theft (2 keys included) and rubberized to protect bike's finish and cables. Long vertical bike support can be removed when carrier is not in use. No tools needed. No need to remove entire carrier from receiver hitch. One-time installation to hitch. Fold-down design for easy access to therear of your vehicle and mounting/dismounting of bikes. Adapters and accessories sold separately.
Manufacturer: Steel Force
SKU: 10101-2004381

EXTRA-CAPACITY REPLACEMENT GAS TANK Limited 3-year warranty Gas tank mounting straps (sold in pairs) available separately Twice the capacity of original-equipment tank (38-gal. vs. 19-gal.)…twice the driving range. Replaces behind-rear-axle tank except on 1980-1989 pickups with dual exhaust which can also replace main tank. Heavy-duty steel is nickel/tin plated inside and out for complete rust resistance. Electrically welded seams are reinforced for greater strength…individually pressure tested for leaks. 34-1/2"W x 13-1/4"H x 26-1/2"L. Installs easily. Won't affect ground clearance, but spare tire must be relocated. Includes:tank, lock ring, rubber "O" ring, spacers, bolts (to extend original-equipment straps), instructions and adapter kit (to modify and remount existing sending unit). Note: Fuel gauge will remain on "Full" longer because of increased tank depth. Not for diesel fuel.
SKU: 10101-2009795

AIR-COOLED VOLKSWAGEN ENGINE INTERCHANGE MANUAL An indispensable guide to rebuilding, modifying, tuning, carburetionand ignition—for classic air-cooled Volkswagen engines Discover which parts will fit your engine and what they'll do for it The User's Guide to original and aftermarket parts Looking for advice on which parts to use for everything from mild increases to full race performance? This easy-to-use reference manual gets you there with detailed information on parts, tuning recommendations, stock part interchange specifications and part numbers, plus a whole range of what's available in the aftermarket. You'll find easy-to-understand coverage of crankshafts, cylinder heads, connecting rods, cylinders and pistons, camshafts, valve train, carburetors and more. Get all your questions answered in more than 140 pages, filled with more than 300 photos and illustrations to guide you quickly and easily.
Manufacturer: Motorbooks
SKU: 10101-2006754

CUSTOM-FIT HIGH-PERFORMANCE COMPETITION HEADERS A must for engines with a restrictive exhaust manifold that can limit operating efficiency and result in sluggish performance Ideal for street or strip—at a fraction of the cost of a Super Competition race header! More HP! Improved mileage! The feel and sound of a smooth-running performance engine! The easy way to add horsepower to your engine for a big performance boost! These competition Holley® headers are designed for the value-conscious enthusiast with a stock to mildly modified engine. They help restore power by letting your engine "breathe" better, operate more efficiently and run cooler. You'll enjoy faster acceleration and get more miles on a gallon of gas. Custom designed of durable 16-gauge mild steel tubing with tuned lengths for maximum performance. Long-transition collectors ensure reduced back pressure for increased exhaust flow. 5/16" machined flanges with welded O-rings make a perfect sealing surface. Superior weld design lasts longer under extreme weather/temperature conditions. Easy to install on stock replacement and most aftermarket heads with an angle-plug configuration. Will not fit most aftermarket racing heads with raised exhaust ports. Headers, gaskets and hardware included. Not equipped with smog fittings. Sold in pairs. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. FOOTNOTES A = Will not fit air injection manifold. Header with air injection fittings available on special order. B = For 1980-present cars, reducers available with oxygen sensor by special order. C = Will not fit angle plug heads. D = Will bolt on the popular aftermarket B-S heads with modifications to heads and header. E = Will bolt on the popular aftermarket B-A heads with modifications to heads and header.F = Will not fit Dart/Windsor head or cars with C-6 automatic transmission. G = Fits 2 V heads only. H = Fits 4 V heads only for vehicles without C-6 transmission. I = Some factory heads do not have bolt hole in end. Holes must be drilled and tapped to ensure proper sealing. J = Installation requires power steering bracket (sold separately; SKU# 49ZX0528TF). K = Installation requires air conditioning bracket (sold separately; SKU# 49ZX0526X for left side, SKU# 49ZX0527N for right side).
Manufacturer: Hooker Headers
SKU: 10101-2006329

BUG ME VIDEOS Show how to maintain, diagnose and repair air-cooled Beetle, Super Beetle, Ghia or early Bus Volkswagen vehicles Created by an expert Volkswagen mechanic with over 35 years experience Watch and learn what is involved in performing a particular repair job before you get started! Detailed description of every step of the job plus the necessary tools required. Provide information on how systems work,why they go bad and how to fix them. Written for the novice, but invaluable to the experienced mechanic.
Manufacturer: Bug-Me
SKU: 10101-2006763

2-TONE NYLON MOTORCYCLE COVERS Top half protects your bike'sfinish from the elements, dirt, debris and tree sap Bottom half is designed to withstand engine exhaust heat Tough, durable, water-repellent nylon won't harm finish Elasticized front and rear hems help hold cover in place. For indoor or outdoor storage. Vented panels allow moisture to escape. Storage bag included.
SKU: 10101-2010148

AMBER LED OPERA LIGHTS Extra lighting and extra visibility for your GL1800! Mount easily with adhesive tape above cylinder head Wire plugsinto existing wiring harness Running light and turn signal functions included. Sold in pairs.
Manufacturer: Big Bike Parts
SKU: 10101-2010423

CORNER LIGHTS Ditch those dull dark lenses and add new visibility to your corner lights with clear lenses! Install in minutes Street legal when used with amber bulbs Sold in pairs. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shippedand may take a little longer to reach you.
Manufacturer: In Pro Car Wear
SKU: 10101-2010129

GEAR BAG Tough, weather-resistant Rhino Hide™ material, reinforcedwith Rhino Rib™ in the center panel for added strength New Mud Guard™ zippers with Kolpin® molded pulls lock out the dirt and debris that can damage stored gear Carry handles and sturdy shoulder straps for easy transport Fold flat for compact storage.
Manufacturer: Kolpin Outdoors
SKU: 10101-2009430

HYDRAULIC JACK, JACK STANDS AND CHOCKS SET Saves big bucks over purchase of individual pieces Heavy-duty steel with baked-on enamel finish Everything you need to work safely under car All components conform to ANS/ASME safety standards. Cannot be shipped express. Set includes: Hydraulic Floor Jack: 2-ton capacity; adjustable height 5.3" to 15.2"; front roller-bearing wheels and rear swivel ball-bearing wheels for easy maneuvering; overload protection and quick-release valve; carry handle. Overall 8.9"W x 5.7"H x 21.1"L. Weighs approx. 27 lbs. Ratcheting Jack Stands (pair): 4-ton capacity/pair; notched saddle safely holds vehicle (including unibodies) without damage. 4-leg design for maximum stability; self-engaging cast-iron pawl is locked inby load; combination release lever/carry handle. Adjustable height 10.3" to 16.3." Weighs approx. 5-1/2" lbs. each. Wheel Chocks (pair): Keep car from rolling. 3.3"W x 3.5"H x 4.1"L. 8 oz. each. Collapsible for storage.
Manufacturer: Torin Jacks
SKU: 10101-2008291

HOOD BUMPER WEATHERSTRIPPING OEM quality Easyto install Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Metro Molded Parts
SKU: 10101-2000260

The Rock Crusher line of Briefs, Windjammers and Tonneau covers are constructed ofdurable "Haartz" U.S. made fabric, which is the same fabric used in factory soft tops.
SKU: 11152 117
Category: Miscellaneous

CHROME-PLATED CUSTOM-FITCASE GUARDS Protect your engine and frame components 3-point mounting on each side to protect front and sides. Rugged 1" diam. chrome-plated steel. Chrome-plated Case Guards with Touring Foot Pads. 2-1/4" x 3-1/4" thick black pads are grooved to prevent slipping and adjust for maximum comfort. Designed to fit models with stock exhaust systems. May not fit models with aftermarket exhaust systems.
Manufacturer: MC Enterprises
SKU: 10101-2004939

6" TFT/LCD MONITOR WITH BUILT-IN TV TUNER Mounts to any surface with adjustable stand (included) Hooks up to your DVD player or VCP/VCR Full-function remote control for easier operation TFT/LCD color monitor for superior picture quality. Digital LCD mini TV with wide-view angle. 4:3 aspect ratio. Output jack allows use of headphones (not included). Features: automatic tuning system; all-supplement channel receipt with 160 preset channels; blue background display; timedautomatic on/off; TV calendar displays year, month, date; A/V input; AC or DC power. Telescoping TV antenna included. 7.08"W x 5.90"H x 1.45"D.
Manufacturer: Pyramid
SKU: 10101-2001625

BESTOP® TAILGATE ENTRY GUARD Protect against scuffs and scratches or hide a damaged sill on older models Tough ABS composite materialwith matte black finish Can be painted to match color scheme Easy to install without drilling. Sold as one guard. The Bestop Closer Look Guide will answer many of the questions you might have about these Bestop products.
Manufacturer: Bestop
SKU: 10101-2010796

SIMULATED SHEEPSKIN SEAT COVERS The look and feel of sheepskin for a lot less! Knit-lined backing stretches to fit high- and low-back bucket seats snugly. Soft and luxurious yet heavyweight acrylic fur covers entire seat and affords year-round comfort. Installs with elastic straps and "S" hooks. Machine washable. Seat range dimension: 22"W x 34"H seat back, 22"W x 26"D seat bottom. See STANDARD-FIT SEAT COVER CHART. Low-backbucket seats with or without headrest. High-back bucket seats (tapered and non-tapered)…also low-back buckets with adjustable headrests (headrests will be covered). To make sure your seat cover(s) will fit right, we are indicating approximate seat dimensions; please refer to that fit range before ordering.
Manufacturer: West Coast Sheepskin
SKU: 10101-2006939

Ultra tear-resistant, oil-resistant and ultra cool. Provides extra protection for shocks& steering stabilizers. Boots sold individually.
SKU: 16021 04
Category: Miscellaneous

CENTRA-POD SPEAKER ENCLOSURES At last! A solution to the sound problems in your Jeep®! Enclosures mount under the dash in front of the shifters and direct unobstructed sound toward you and your passenger Designed so speakers will be angled right at the ears of the people in the front seats Made of super-tough1/8" plastic, they'll complement vehicle's factory interior. Mount easily to the floor in your '76-95 CJ or Wrangler without modifications (some drilling required). Enclosures can also be installed in earlier models, but minor modifications and at least 6" of unobstructed area with uniform curve between shifters and firewall are required. Hardware and instructions included.
Manufacturer: Select Increments
SKU: 10101-2001246

BODY REPLACEMENT AND REPAIR PANELS FOR VW Repair rusted and dented body sections with perfect-fit, die-formed and shaped body panelsHeavy-gauge primer-coated steel prohibits rust Install easily with screws, by welding or by riveting (welder or rivet gun not included); hoods, hood hinges, running boards and rear deck lids bolt on. Finish with epoxy filler (sold separately) and paint. NOTE: SKU numbers ending in E are freight shipped from JC Whitney warehouse by truck.
SKU: 10101-2006084

HEATING/AIR CONDITIONING MANUAL Step-by-step procedures guide youthrough troubleshooting, repair and maintenance. Information on various components and diagnostic tools needed. Repair specs. Over 200 pages.
Manufacturer: Haynes Manuals
SKU: 10101-2006749

Michelin Pilot Alpin Tire priced from $79.00. Most high performance and grand touring automobiles demand an even greater edge in winter conditions when they need to mix with snow and ice, as well as, still provide responsive handling on dry winter roads. Michelin's Pilot family of low profile, high speed tires now includes the Pilot Alpin which blend winter weather traction with excellent levels of wet and dry traction.The Pilot Alpin features a directional high contact tread design to help maintain good traction on wet and slush covered roads while it bites into snow with its independent tread blocks and high density sipes. The Pilot Alpin even gives these sipes the same patented Torque-Locking feature found on Michelin's ultra high performance all-season radials to enhance dry road performance and handling. The Pilot Alpin alsofeatures Michelin's high-compliance tread rubber compound which remains flexible at lower temperatures for greater grip and better handling when temperatures ...
Manufacturer: Michelin
SKU: Michelin Pilot Alpin Tire
Category: Automotive Parts and Accessories Parts Tires

CHROME-PLATED 7" HEADLAMP REPLACEMENT SEALED BEAMS For all dune buggies, custom cars, hot rods, antique cars, trucks and tractors—meet DOT requirements High/low sealed beam bulb Add a sleek custom look to your vehicle and withstand rough treatment! Bullet-shaped, 7-3/16" diam. x 6" deep. High and low sealed beam bulb. Easy-to-adjust single-boltball mount. Sold in pairs. Flexible conduit set available separately.
SKU: 10101-2003808

STAINLESS STEEL RADIATOR HOSE WITH END CAPS The end of ugly rubber hoses…forever! Hot finishes/colors brighten your under-hood area Corrosion-resistant 300 series stainless steel hoses can be shaped into anyconfiguration to create a unique look and aid in cooling…made to withstand vibration! Hose end caps are 6061-T6 billet aluminum. Kit includes one hose and 2 hose end caps.
Manufacturer: Mr. Gasket
SKU: 10101-2000887

CITATION SUNGLASSES Shatter-resistant polycarbonate lenses provide 99.9% UVprotection while the scratch-resistant coating extends the life of the lens Perfect for men and women! Meets ANSI Z87.1 specifications Wraparound glasses with rubberized temple tips and one-piece lens. Features a nylon frame that's strong and impact resistant yet extremely lightweight. Soft PVC nosepieces ensure greater comfort even after long wear. Sold in pairs.
SKU: 10101-2000221

Breyton Wheelspriced from $99.00 to $1175.00. Breyton Wheels Exclusively for BMW
SKU: Breyton Wheels
Category: Automotive Parts and Accessories Parts Wheels

TRI-LEVELER™ SET Enjoy level parking on rocky or uneven terrain without spending a fortune! Set levels RV by raising tires 1-1/2", 2-3/4" or 3-7/8" Easy to use—simply drive your tires onto leveler to the height desired Strong, lightweight honeycomed resin construction.Works with single and dual wheels. Built-in carry handle. Set of 2 plus storage box. Limited one-year warranty.
Manufacturer: Camco
SKU: 10101-2008289

REAR TAILLIGHT SEALS Replaceyour Beetle's worn or damaged taillight seals Seals between the housing and fender Install using existing hardware Sold in pairs.
Manufacturer: EMPI
SKU: 10101-2009981

9" CEILING-MOUNT FLIP-DOWN TFT/LCD MONITOR WITH NEON LIGHTS TFT/LCD monitor—far superior picture quality than conventional LCD monitors On/off, color and brightness controls Front-panel power pushbutton controls Ready to enjoy! Compact, concealed design for easier installation in more vehicles. Simply plug monitor into your DVD player or VCP, then hook up DVD player or VCP to your radio and listen to your movie through vehicle's sound system. NTSC/PAL system. Viewing angle: 30° left and right, 30° top, 10° down (angle can be adjusted manually). Neonlights put on a real show in your vehicle! Ultra-slim design. High-resolution display. 16:9 aspect ratio. VCR/VCD/DVD/game play sign input. On-screen display menu. Automatic power-off. Auto alarm. 2 video inputs. Dark gray housing. Includes infrared remote control, wire harness with noise filter plus RCA jacks for video in/video out and 12-volt power and ground leads with fuse. Note: If your vehicle does not have RCA input jacks, order FM modulator (sold separately; SKU# 48ZX4964X) to listen to sound through vehicle's speakers.
SKU: 10101-2001629

CHROME-PLATED HEADLIGHT RING Custom-fit to replacedamaged originals perfectly Order according to OE fit.
Manufacturer: EMPI
SKU: 10101-2009973

Kosei K1 TS Silver Painted Wheels priced from $119.00 to $300.00. Kosei K1 TS Silver Painted Wheels.
Manufacturer: Kosei
SKU: Kosei K1 TS Silver Painted Wheels
Category: Automotive Parts and Accessories Parts Wheels

OIL FILTER COOLERS Convert your oilfilter into an oil cooler and save hundreds of dollars on engine repairs and replacement! Collars work like a heat sink to lower oil temperature to safe water temperature level Excellent for protecting the engine when off-roading Protects filter from debris and rocks while adding a custom look. Collars install quickly and stay secured with a stainless steel clamp (included). No lines to install or fittings to leak. Won't interfere with airflow through radiator.
Manufacturer: Cool Collar
SKU: 10101-2000859

STEP BUMPER BOX HITCH Built-in safety chain holes for fast, easy hook-up! 5,000-lb. gross load capacity, 500-lb. tongue weight capacity Heavy-duty steel plate. Mounting holes allow easy bolt-on installation to existing holes (spaced8"-9" apart) in step bumper. Hardware included. Accepts regular or deep drop 2" square ball mount (not included). Rust-resistant, black powder-coated finish.
Manufacturer: Acar
SKU: 10101-2004370

REPLACEMENT BRAKE MASTER CYLINDER With fluid reservoir Large 22mm single-circuit piston for maximum braking power For dune buggies and sand buggies with Volkswagen Beetle frame Compact—fluid reservoir mounts on top ofcylinder. For use with 2- or 4-wheel brake setups. Steel mounting threads.
SKU: 10101-2008435

REAR SHOCK MOUNTS Allow installation of up to 4 additional shock absorbers on rear suspension Provide extra control over off-road terrain Please note: Fabrication of an upper shock mount will be required. Sold in pairs.
Manufacturer: Dee Engineering
SKU: 10101-2007390

CHROME-PLATED NUT AND BOLT COVER-UP KIT Dazzling, chrome-plated, custom-styled cover-ups for dull or rusted nut and bolt heads! Cover all visible and apparent nut and bolt heads not originally factory chrome-plated For Honda, Kawasaki, Suzuki and Yamaha models Chromed covermade of super-tough aerospace GFP™ polymer to retain their showroom sparkle even after years of hard rides. Simply press on—multiple serrations grip full length of nut or bolt head. No adhesives. Remove with small screwdriver or knife. Please Note: Not for exhaust nuts and bolts or round hex-head bolts. Covers sold separately by size. Nut and Bolt Covers—by size. Order by wrench size.
Manufacturer: MC Enterprises
SKU: 10101-2006701

DOUBLE-DECK REAR WING WITH PAINTABLE END CAPS Priced low to give you the look you want without squeezing your wallet Designed to enhance your car's lines and contours Made of top-grade fiberglass—strong, durable and exceptionallylightweight Approximately 9" high. Third brake light included. Some surface prep required before painting. Easy bolt-on installation to trunk lid; some drilling required. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2001928

MOUNTING ANTENNA PAD WEATHERSTRIPPING OEM quality Easy to install Shipped separately from factory. NOTE: SKU numbers ending in F are factory shippedand may take a little longer to reach you.
Manufacturer: Metro Molded Parts
SKU: 10101-2003385

Add comfort and convenience. A large carpeted lockable storage compartment, padded armrest, twin multi-drink holders and factory matched colors add up to the best padded console on the market. New heavy duty hinge and lock rail. Hardware, mounting bracket and step-by-step instructions included. Not to be confused with cheap imitations, this is Genuine Bestopquality. Fits all CJ and '87-'95 Wrangler models. Console Measures 24"x7.5"x13"
SKU: 24021 07
Category: Miscellaneous

NEXT GENERATION EURO TAILS A unique combination of clear lens, sharp housing plus unique red reflector lens that uses original clear bulbs! Lens assembly meets all DOTrequirements Easy to install A new look for a new generation!
Manufacturer: APC
SKU: 10101-2003546

BESTOP® SEAT SLIDER Replaces bent, broken or rusted risers on original-equipment seats, TrailMax™ seats and other aftermarket seats Converts stationary front seat to adjustable seat—allow 6" fore and aft movement Fits eitherdriver's or passenger's seat. Set of 2; order one set per seat.
Manufacturer: Bestop
SKU: 10101-2007083

CHROME-PLATED MUFFLERS Replacement style restores bike's original look Reduce back pressure and restore performance and acceleration lost due to a faulty muffler! For '70-on BMW cycles Reverse-cone mufflers made of chromed cold-rolled, heavy-gauge carbon steel. Mechanical metal baffle core never needs replacement. Welded-on mounting tab. Slip on over existing original size and styleexhaust pipes only. Measure outside diameter before ordering. Use original mounting hardware, clamps and brackets to install.
SKU: 10101-2006470