GAS TANK STRAP @ Automotive online store

GAS TANK STRAP Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and maytake a little longer to reach you.
SKU: 10101-2005722

CHROMED WATCHBAND-STYLE MOTORCYCLE BELT Features popular chrome-plated die-cast 3-row style watchband-like links for middle section Black-dyed genuine leather end sections 5 sizes available Metal-reinforced belt tip. Chrome-plated metal buckle (nonremovable) and keeper. Approx. 1-3/8"W. How to Order: Measure waist size over pants where belt is normally wornand order corresponding size. If between size ranges, order the larger size belt.
SKU: 10101-2000030

HIGH-SPEED TREAD MOTORCYCLE TIRES (TUBE) Inner tubes and rim strips sold separately Dig-deep tread for improved stabilityand more responsive handling plus great mileage Micro-slots provide improved wet-weather handling and improved grip for better cornering and stability, plus ensure reduced heat buildup. Meet or exceed DOT highway specifications. Full-depth center groove to channel water out of the way. High-speed rated tires ("H" rated tires withstand speeds up to 130 MPH) EXCEPT Style 9. 2-ply nylon cord construction with 4-ply rating (load range "B") except (A) which have a 6-ply rating (load range "C"). Note: Ply figures given are ply ratings ("PR" as shown on tire), not actual polyconstruction. All are tube-type except (B) which is tubeless. Tubeless tires can be used on tube-type wheels with an inner tube and rim strip (sold separately). How To Order. Before ordering, check tire size found on current tire sidewall or as listed in owner's manual, then order the same size tire. If ordering a wider tire, be sure to allow sufficient clearance and check the manufacturer's recommended rim widths (RRW) and load ratings (LR) to help determine which tire is best. (RRW) Given in inches. (LR) Given in pounds for each tire (based on a tire inflated to the psi indicated on sidewall); add front and rear load ratings to determine TOTAL for cycle. (SIS) Standard inch sizes Tire Width x Rim Diameter.
Manufacturer: Cheng Shin
SKU: 10101-2003940

PANEL BENEATH REAR WINDOW/REAR VALANCE Increase your car's resale value by replacing rusted-out or damaged fenders and panels Improve car's appearance…help restore original look Heavy-gauge, cold-rolledsteel panels are die-formed to fit perfectly! Prime coated (except where noted which are plain steel) to help prevent rust and allow easy painting (some surface prep required). Weld-on, rivet-on or screw-on installation (welder or rivet gun not included).
Manufacturer: American Designers
SKU: 10101-2000557

INTERIOR STORAGE COMPARTMENTS AND BOXES Great replacements for worn originals or parts which were not included Rugged, long-lasting black ABS plasticEasy-to-install glove compartments, dash-mount storage compartments and fender-mount storage boxes are perfect replacements for originals…or add that always-valuable extra storage space.
Manufacturer: Quality Craft Corp
SKU: 10101-2007496

1978-86 CJ WITH6 CYLINDER AND WITHOUT POWER BRAKES
SKU: 51303 00
Category: Miscellaneous

CARBON FIBER REAR WING Genuine carbon fiber looks great with less weight! Maximizes downforce at rear for improved stability Serves as a sun shade to keep interior cooler Installs using existing holes—no drilling required. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and maytake a little longer to reach you.
SKU: 10101-2001871

TYPE 1 RALLY SCOOP Signature grille! High temperature, epoxy based dry carbon-fiber 3K twill composite material Pre-installed 3M™ PT 1500 OE approved, double-faced tape Installs in minutes with basic hand tools—no drilling required. 14"W x 16"L. Mounting hardwareand step-by-step installation instructions included. Made for non sunroof vehicles.
Manufacturer: 3dCarbon
SKU: 10101-2010197

DUAL WHEEL VALVE STEM EXTENSIONS WITH HEAVY-DUTY BRACKETS Make filling and checking air pressure quick and easy Features "live stem" design to prevent airleaks even if damaged Rugged braided stainless steel extensions with wire stabilizer to prevent movement Ideal for use with any brand of wheel simulators. Easy to install. Limited one-year warranty.
Manufacturer: PHOENIX
SKU: 10101-2004010

REAR 1-1/4" ADD A LEAF KIT Affordable, bolt-on lift for the rear of your Jeep® Cherokee! Powder coated gray or zinc plated for the ultimate protection from the elements Engineeredfor dependable service on or off-road
Manufacturer: WP Warrior Products
SKU: 10101-2010404

POWDER-COATED ALTERNATOR Add a show-quality look to your engine with a colored powder-coated performance alternator! Select the alternator the is perfectly matched to yourvehicle's amperage demands One-wire alternator is capable of both one- and 2-wire applications Performance tested and ready to supply power to your ignition or audio system. Assembled with deep-groove drive pulleys. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2009467

2-STAGE SHOCK SENSOR Detects vibration from attempted break-in. 2-stage sensor warns vandals (whenlight impact is detected) or instantly triggers alarm (upon hard impact). Plastic case. With instructions.
Manufacturer: Valiant
SKU: 10101-2001330

LOWER SIDE COVERS Custom fit…showroom chrome-plated! Replace the drab gray or color-matched piece between the upper engine side cover and rear step cover For '88-2000 Honda GL1500 models Fit and mount like originals…install easily using existing hardware.ABS plastic. Pair for left and right sides. Includes instructions.
SKU: 10101-2005446

2-TONE VELOUR SEAT COVERS Rich polyester velour looks much more expensive than it is! Not only elegant, but durable and long lasting as well Covers protect new or existing seats or rejuvenate old or worn upholstery. Provide complete coverage of the entire cushion, sides and backrest areas. Meet or exceed original-equipment material standards. Feature strong double-stitched and reinforced seams. Pleated center insert comes in a complementary color. Foam or fiberfill padding for maximum riding comfort. Color-matched, tri-laminated polyester trim ensures a snug, smoothfit. Covers attach easily with included elastic strap hooks, rings and instructions for a factory-installed look. For factory-original seats only. Will not fit aftermarket or conversion seats. Front sets include 2 front buckets or one front bench seat. Matching headrest and armrest covers sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. To receive a color fabric sample(s), call (877) 927-7427 and request the color(s) you would like.
Manufacturer: Autocraft
SKU: 10101-2006868

Dunlop SP Sport 01 A Tire pricedfrom $71.00 to $333.00.
Manufacturer: Dunlop
SKU: Dunlop SP Sport 01 A Tire
Category: Automotive Parts and Accessories Parts Tires

PREDATOR FRONT AND REAR BUMPER GUARDS Strong welded one-piece design for style and rugged protection Durable 2" diameter tubing (.049 wall) 1/4" thick side plates with black rubber bumper strips Install easily in factory mounting holes—no drilling for most applications. Mount over factory bumpers—no modificationsrequired. Can be used with any side tubes…rear bumpers can be used with factory 2" receiver hitch. Hardware and instructions included. Limited warranties: 5 years for black, lifetime for stainless steel. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2009487

Daystar combines their fully welded round tube reinforced shackles with their famous rifle drilled greasable shackle bolts and then tops it off with grease grooved polyurethane bushings. SuperGreasable Shackles are available in lengths that are longer than stock shackles to provide extra lift. Shackles feature 3/8" thick tig welded side plates and are zinc plated yellow for good looks and durability. The urethane bushings have grease grooves to channel the lubrication to provide a smoother ride over ordinary shackles. Shackles come complete and are sold in pairs. This kit is for the rear of '76-'86 CJ7.Designed for Stock Springs
SKU: 16052 234
Category: Miscellaneous

3- AND 4-WAY HIGH-POWER SPEAKERS Ultra high power—the result of the superior midrange/tweeter magnets Premium-quality cone delivers sound quality and deep bass reproduction conventional cones can't approach Pure aluminum diaphragm enhances sound quality and extends high-frequency response Titanium dioxide film coating dramatically improves high-frequency response. Woofers feature metal-sputtered olefin/aluminum diaphragms forstrength and improved sound. Rolled butyl rubber edge. Sharp looking—titanium-colored grilles and black cones. Super resistant to extreme temperatures and vibrations. 4 ohms. Sold in pairs.
Manufacturer: JVC
SKU: 10101-2001281

REPAIR MANUAL For most American and imported cars, trucks, vans Features illustrations, specifications and exploded views Saves you money on repairs and maintenance—do it yourself! Comprehensive,detailed, step-by-step procedures for troubleshooting, repairing and maintaining all systems (including electrical and emission control).
SKU: 10101-2006802

This KeyRing with the new Carabiner style is tough enough to stand up to constant contact with other keys. The perfect gift for your friend and relatives - for any time of year.
SKU: 15176 01
Category: Miscellaneous

MB421 UNION STATION LEATHER MOTORCYCLE BOOTS FOR MEN Tough Goodyear® welted construction and 2.2mm thick full-grain black leather uppers with heavy-duty stitching throughout Boots can be resoled and reheeled for years of dependable wear Custom-sized full-cushion insoles add to the overall comfort and great fit…they're removable and machine washable 10" leather upper. Heavy-duty, oil-resistant rubber soles are nonskid, nonslip and nonmarking. Rear zipper opening makes slipping boots on/off a snap. Freedom Flex™ Construction (described below), leather texturing, stitching and classic hardware. Boots are available only in the size listed and in medium width. Sold in pairs. How to order: Check the size inside a current andcomfortable pair of shoes or boots and order the same size. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Freedom Flex™ for Instant Comfort! Freedom Flex™ Construction ensures freedom of movement and walking comfort right out of the box! No stiff, uncomfortable break-in period needed. It's like combining the ease of a leisure shoe with the look and toughness of a biker boot.
Manufacturer: Carr
SKU: 10101-2000038

REPLACEMENT CONVERTIBLE REAR WINDOWS Custom-tailored, complete, ready-to-install window assemblies fit perfectlyNot a complete top, but a rear curtain to replace damaged or discolored rear windows Tailored to fit perfectly Plastic rear windows (for cars originally equipped with plastic windows) are clear, tough and flexible, with water-repellent trim. Approved in all states. Glass rear windows (for cars originally equipped with glass windows) are made with tempered safety glass. Available with or without laminated rear defroster, as original.
Manufacturer: Kee Auto Top Manufacturing
SKU: 10101-2002694

VIP STYLE SOFA/BEDS Thick foam cushion on fully sprung frame Reclines flat to form a comfortable bed Soft front skirt provides easy accessto under-seat storage Full-sprung 16-gauge tubular steel frame. DOT certified and flame retardant plush fabric. Middle and rear bed may be combined for larger bed surface. Limited 3-year warranty. To receive a color fabric sample(s), call (800) 529-4486 and request the color(s) you would like. Shipped separately from factory. NOTE: SKU numbers ending in FE are factory shipped by truck freight.
Manufacturer: Qualitex
SKU: 10101-2006999

M3 STYLE MIRRORS Custom-fit replacementmirrors for your car Paintable black finish Blue tinted, non-glare glass Includes one left-side mirror and one right-side mirror. Installs using existing holes and hardware. Sold in pairs.
Manufacturer: Arospeed
SKU: 10101-2010185

CONSTANT VELOCITYJOINTS GKN® CV joints replace originals perfectly For water-cooled Volkswagens
SKU: 10101-2001132

Eliminate swaying and diving when cornering or carrying heavy loads with the patented coil-over spring and collar set-up. Push-Pull actionof spring creates self leveling effect to control body roll. Helps prevent nose diving during hard braking. Features 9-stage velocity sensitive valving, hardened and chrome plated piston rod, adjustable aluminum collar assemblies and urethane bushings. Lifetime Limited Warranty! **Specify Year, Model, & Suspension Lift amount of your vehicle when ordering**
SKU: 16013 06
Category: Miscellaneous

OE-STYLE FENDER FLARES Great low price! Install easily—no drilling or screws! Heavy-gauge ABS plastic is tough, UV resistant andwon't warp, sag Computer designed and precision cut for each application-fit perfectly Install securely using unique clip system. Charcoal gray color—easily paintable to match truck. Complete 4-pc. set for front and rear wheels.
SKU: 10101-2008747

DIFFERENTIAL SPIDER GEAR KIT Shipped separately fromfactory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2001143

COLD WEATHER MASKS Great protection against windburn Choose soft acrylic/cotton blend knit or stretchable nylon mask Specifically designed for motorcyclists and snowmobilers Masks are thin enough for comfort under a helmet, yet thick enough to provide face and neck protection even in cold weather. Blackonly. One size fits all.
Manufacturer: R C First Enterpries Inc
SKU: 10101-2000118

TURN SIGNAL AND REFLECTOR GRILLES Dress up your bike with bright chrome-plated custom accents Easy mounting with self-adhesivepressure-sensitive backing Chromed metal grilles feature contoured cutouts Sold in pairs.
SKU: 10101-2003460

DUAL-SCALE TORQUE WRENCH Reads0-600 in.-lbs. and 0-691 cm.-kgs. 3/8" drive, 17-1/2"L
SKU: 10101-2007931

SEAT BELT TENSION ADJUSTERS Relaxes tightness to improve comfort. Won't affect performance of belts. Relieves annoying tension. Attaches easily without tools. Black plastic. Pair for 2 belts. Forfront seat shoulder belts: Attach to door pillar mounting post over seat belt anchor point. For all front or rear seat belts: Fits all shoulder and lap belts.
Manufacturer: Peko
SKU: 10101-2006855

Imagine taking the best soft top for Jeep in the world, and making it even better! The Sunrider is a whole new way to look at open top convenience. You can fold the whole top down, but you don't have to. The front of the top quickly flips open to let the sunshine in. Think of the convenience on days when the weather is constantly changing from sun to spitting rain. The Sunrider attaches to the body of the vehicle with a track system. This eliminates snaps of old-fashioned soft tops for Jeep and gives a continuous clean looking weather tight seal.Like any other Supertop, you can fold down the entire top without removal from the top frame and all hardware stays on the Jeep. No loose parts to get lost. All of your favorite Supertop features like removable (and replaceable) windows, EZ Open Tailgate hardware, black powder coated aluminum and steel hardware are part of the package. Each Sunrider is complete with every piece of hardware that you need. Most hardware is factory pre-assembled to cut down on installation time. Nothing extra to buy! The Sunrider is available for all '79-'00 Cj7 and Wrangler vehicles, in factory matched colors.
SKU: 11101 33
Category: Miscellaneous

X-MONITOR FOR DIESEL ENGINES Monitors exhaust temperature, turbo boost pressure and transmission temperature—all at the same time!Driver's side "A" Pillar mounting for at-a-glance viewing—won't restrict field of vision Monitor face flashes a warning when any of the pre-set limits are met or exceeded It's hard to have too much turbocharger boost pressure; however, too little boost pressure under a heavy load can result in high operating temperatures that can damage your drivetrain. With the X-Monitor, you will instantly know how hard your automatic or manual transmission/differential is working. By giving you the ability to protect your truck against engine, turbo and transmission wear or failure, you'll be able to extend the life of your drivetrain. Easy-to-install kit includes: digital-display monitor, housing, module all necessary wiring, hardware and instructions.
Manufacturer: B D Diesel
SKU: 10101-2009536

FLAMES GRAPHICS Red flames add a bold, bright splash of color to the sides of your truck! Big—2feet long and 8" high! Durable high-density vinyl with super-strong self-adhesive backing Graphics adhere easily, conform beautifully and won't harm vehicle's finish. Sold in pairs.
SKU: 10101-2006576

Sold individually Now, a new neoprene face fabric gives "TheSeat with Guts" wet-swimsuit, drenched-dog water protection! As in all Trailmax seats, the Aqua Sport's Atlas Frame, V-ROR Springs and Ultimate Foam team up to deliver smooth sailing on the road and an extra level of support on the beach or trail. Plus an adjustable, reclining back with a mesh pocket and enhanced bolsters help you maintain the optimal position for steering, throttle and brake control. (Wear your seatbelt at all times) Comes fully assembled. Include mounting hardware.
SKU: 24272 115
Category: Miscellaneous

ALL-SEASON WINDSHIELD COVER Anti-theft feature with locking handles inside your vehicle Guaranteed not to rip or tear Efficient sunscreen during hot summer days The WeatherBuster™ is made of a space-age polyester fabric and is laminated with a silver aluminum mylar film developed for the space program and widely used as a thermal barrier. Protects vehicle's dash from harmful UV damageduring hot summer days. In the winter, it protects your windshield from frost and ice. Will not stick or crack during freezing temperatures. Rolls up for easy storage. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2010492

CUSTOM-FIT TOURING AND SPORT SEAT KITS Replace your stock seat with a comfortable double bucket or stylish sport seat Seats feature premium black vinyl cover (double stitched for strength) and one-piece molded polyurethane foam cushion Cover is attached to cushion for easy installation Custom fits your original stock seat base pan…no special tools required. Kits include instructions. Motorcycle seat kits cannot be returned for credit, refund or replacementif altered, modified, abused or damaged by customer. Cannot be shipped express.
SKU: 10101-2007008

CUSTOM-FIT SEAT BRACKETS Required for installation of Tenzo-R Reclining Sport Seats Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and maytake a little longer to reach you.
Manufacturer: Tenzo R
SKU: 10101-2010215

BODY FENDER SPOON SETMade of drop-forged, heat-treated steel All spoons in this 3-pc. set can be used for spreading hammer blows 3-pc. set includes 10" light slapping spoon, 14" spoon dolly with long extension handle and 17" curved spoon with thin blade.
SKU: 10101-2004076

When an off road racer wins a raceit's a safe bet KC Daylighters have lit the way. Engineered to last with a super-bright polished parabolic reflector, rugged features include a competition-proven flexible base and bulb mounting system, and 100 watt 200,000 candlepower quartz halogen output. Best of all, there's a 23-year limited warranty to prove it. Available individually or in pair-packs, either way a distinctive hard protective cover is included pair packs included. Pair packs include a switch and wiring.Choose from chrome plated, black painted or gleaming long-lasting stainless steel housings. Check local regulations about auxiliary before purchase.
SKU: 97026 03
Category: Miscellaneous

VIDEO IN A BAG Completely portable! Everything fits into one easy-to-carry bag Includes VCP and 4" TFT/LCD monitor! Plug and play! Simply plug unit into 12-volt outlet (in your vehicle) or 120-volt outlet (in your home or motel) and enjoy that classic movie! Take your entertainment everywhere with you! Mounts between seat for rear-passenger viewing (straps included). Speakers are built into the monitor. Monitor includes color, brightness, tint and volume controls. Stereo VCP has front controls. Heavy-duty carry case.Includes 12-volt power cord plus two 120-volt AC home adapters. Approximately 11-1/2"W x 22"H x 4-1/2"D.
Manufacturer: Pyle
SKU: 10101-2001641

SEAT COVERS Yesterday's look made with today's quality! Authentic design colors andmaterials Piping on seats is made from an exclusive extrusion process for a solid color throughout—no cords or strings to show through due to wear
Manufacturer: TMI
SKU: 10101-2009894

Our custom-cut Floor Mat Sets are manufactured from durable high grade automotive carpeting. Mats feature a special rubber spiked backing to insure that your mats stay put. The easiest way to save wear and tear onyour carpets. Adds extra sound deadening too. Front and rear mats included-Black
SKU: 64054 01
Category: Miscellaneous

Rear drive shaft, overall length collapsed is 33". Used for'81 CJ8 with 4 & 6 cylinders and T-170 transmission, or for '82-'86 CJ8 with 4 cylinders and T-4 or T-5 transmission.
SKU: 52301 07
Category: Miscellaneous

HotchkisTuning Competition Anti-Roll Bars priced from $299.00 to $585.00. Hotchkis Tuning anti-roll bars improve handling and reduce body roll. Turn in with confidence and late brake in the corners with Hotchkis Tuning's track-tested, lightweight hollow bars. Anti-Roll Bar Kits include front and rear bars, greasable bushings, a
Manufacturer: Hotchkis Tuning
SKU: Hotchkis Tuning Competition Anti-Roll Bars
Category: Automotive Parts and Accessories Parts Suspension

PETERSEN AUTOMOTIVE CORP. PORTABLE CAR AND TRUCK RAMPS For all vehicles with up to 8"W tires Heavy-duty 2-pc. Ramps:6,000-lb. axle weight, 10,000-lb. GVW capacity per pair. Lift car 7-1/2". Welded heavy-gauge steel. Detachable ramps with embossed surface. Rubber feet prevent slipping. Ideal for low-clearance vehicles. 11"W x 8-1/2"H x 36"L. 1-pc. Ramps: 4,000-lb. axle weight., 6,500-lb. GVW capacity per pair. Lift car 8". 10"W x 9-1/4"H x 33"L.
Manufacturer: T & D Metal
SKU: 10101-2004722

3-PIECE H.V.L.P. SPRAY GUN KIT Dual set-up allows for 2 types of applications Control knob on side of gun lets you regulate pattern output Air inlet: 1/4" Versatile spray gun kit includes 2 guns for different uses. 1.4mm needle and nozzle set is for lighter coats such as high-quality base or clear-coat applications. 1.7mm needle and nozzle set is for heavier applications usingprimers, for surfaces and filler. Locking pressure regulator with gauge completes the 3-piece set. Operating pressure: 15-45 psi. Average air consumption: 7.0-9.0 cfm. Kit also includes 1 -liter aluminum gravity-feed paint cups.
Manufacturer: Titan
SKU: 10101-2004086

PERFORMANCE ACCESSORIES™ SWING-AWAY TIRE AND GAS CAN CARRIERS Heavy-duty carriers securely hold up to 39" tire without rattles For Jeep Wrangler YJ or TG Choose tire carrier or combination tire and gas can carrier (holds 2 jerry cans) Spin-on mount accepts mostaftermarket wheels Carriers swing out for easy access—heavy-duty hinge and internal-mount brackets close with a 500-lb. lockable draw latch Can be used as a high-lift jacking point (175-lb. load rating). Includes CB antenna mount (antenna not included). Bolt plate adapter sold separately. Questions? Log onto www.performanceaccessories.com.
Manufacturer: Perfornance Accessories
SKU: 10101-2007143

PIAA Super Wht 168 Bulbs priced from $15.00. PIAA Super White 168Replacement Bulbs priced from $15.
Manufacturer: PIAA
SKU: PIAA Super Wht 168 Bulbs
Category: Automotive Parts and Accessories Parts Accessories

SUICIDE HINGEKIT There is nothing cooler than suicide doors! Billet hinges MTG plates Requires professional installation. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Electric-Life
SKU: 10101-2010225

CAT-BACK EXHAUST SYSTEM Triple-pass-tube racing muffler plus big-bore, constant-cross-section 16-gauge aluminized tubing for maximum exhaust flow without restrictions Fully polished T304 stainless steel oval muffler case completely welded with no glass or seams to blow More power for street and strip plus the evil Warlock™ sound! Big 4-1/2" stainless steel welded-on tip with rolled edge. Bolts easily in minutes to original-equipment system without modifications. Huge 2-1/4" tubing for Acura and Honda. Kit includesnecessary mounting hardware.
Manufacturer: Airmass
SKU: 10101-2006416

DIE-CAST ENGINE MODELS These 1/6 scale replicas are sure to be any collector's favoritePerfect for automotive enthusiasts of all ages! Unique, innovative, detailed and authentic
Manufacturer: Liberty Classics
SKU: 10101-2000230

EXTERNAL-MIX AIR BRUSH KIT Sprays acrylics, lacquers, dyes, inks and enamels External-mix siphon-feed gun with adjustable (3/4"W to 2"W) spray pattern. Operates on 15- to 50-psi pressure. Kit includes 3/4-oz. jar, 6-ft. vinylhose, propellant can regulator and valve. Propellant not included.
Manufacturer: Badger Air Brush
SKU: 10101-2004096

LEATHER RIDINGJACKETS Absolutely no effort is spared—it will be the most comfortable you've ever worn! Smooth, supple, top-grain cowhide jackets feature expert tailoring and detailing throughout Stops the wind, resists abrasion and simply looks great Zippered pockets, Thinsulate® lining and more!
Manufacturer: Carr
SKU: 10101-2000085

SKULL AND CROSSBONES BELT Black-dyed heavy-duty stud-accented leather end sectionsdecorated with chrome-plated 5/16" diameter flat-top studs Chrome-plated removable metal buckle Chrome-plated middle links feature black-etched skull and 2 sets of crossbones, keepers and reinforced belt tip Measure waist where belt is normally worn (over pants). Then order the corresponding size. If waist is between size ranges, order the next larger size belt.
SKU: 10101-2000022

UNIVERSAL BILLET ALUMINUM ELECTRIC WATER PUMP KIT SAVE $20! You've been robbed—your current water pumpis stealing up to 15 horsepower from you each time! This affordable replacement maximizes the horsepower needed to improve the performance of your vehicle Kit includes durable billet bracket with anodized finish, pulleys, 12-volt electric motor, belts, fasteners and switch. Please note: Water Pump not included.
Manufacturer: PROFORM
SKU: 10101-2009544

LEATHER CYCLE HATS AND CAPS Made of black-dyed, soft, natural-grained leather with reinforced stitching Look great even after long, hard wear Choose from a variety of popular and classic styles
Manufacturer: Carr
SKU: 10101-2000075

ELECTRONIC TACHOMETER Ideal for low-revving street and off-road engines. Tough! Shock-resistant heavy-duty glass-filled polyester case. Reads 0-4,000 RPM. Illuminated, large 3-3/8" diam. black face with whitepointer (270° sweep), white numerals and orange international RPM symbol. Polished stainless steel bezel. Accurate solid-state electronics. Fast pointer response. Mounts easily in dash—approx. 3-3/8" diam. opening, 2-5/8"D clearance required. Can be mounted on or under dash or on steering column with mounting housing sold below. For all 4-, 6- and 8-cylinder gas engines with 12-volt negative-ground and ALL ignitions.
Manufacturer: Datcon Instrument
SKU: 10101-2008903

HITCH RACK Fits existing 2"receiver hitch Provides additional cargo-carrying capacity Around town or around the country, load carriage has just improved
SKU: 10101-2004462

FRONT FENDER TRIM RAIL Adds a bright, custom-fit, chrome-plated new touch to your bike Custom-formed rail made of triple-chrome-plated 1/2" diameter steel tubing For Honda, Kawasaki, Suzuki and Yamaha models Contoured to flow with the lines of front fender. Looks factory installed. Bolt on easily to original fender mounting bracket using existing hardware. Includes all needed additional hardware and instructions. Not for use with fender tip accents. NOTE: This is a custom-fit item. The image shown is a representation of this item for a specific year, make and model. The item you receive may look somewhat different in order to accommodate yourspecific motorcycle.
Manufacturer: MC Enterprises
SKU: 10101-2008738

Ultra Heavy-duty flame-cut shackles provide approximately 11/2" of lift for extra tire and groundclearance. MIG welded and jig-built these shackles are complete with US made hardware for a total installation. Shackles are 8.25" long. Sold in pairs.
SKU: 16046 02
Category: Miscellaneous

SOFT FORM-FITTING HEADWRAP Wrap absorbs perspiration and oil to keep you cooler and your helmet interior cleaner A colorful way to keep hair in place (prevents "helmet hair and itch") and the sun off the top of your head Wide tail protects back of neck from sunburn2-way stretch DuPont Antron/Lycra® with tie straps in back. One size fits all. Machine washable.
Manufacturer: R C First Enterpries Inc
SKU: 10101-2000012

HIGH-FLOW CATALYTIC CONVERTER Higher flow than most aftermarket converters Polished heat shield Stainless-steel construction Meets these EPA displacement requirements: Up to 5.9L engine with vehicle testweight of 6,000 lbs.
Manufacturer: SUPREME
SKU: 10101-2009548

INSTRUMENT PANEL Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a littlelonger to reach you.
SKU: 10101-2008225