SUNRIDER W/O DRS YJ/CJ7 BLACK DENIM @ Automotive online store

Imagine taking the best soft top for Jeep in the world, and making it even better! The Sunrideris a whole new way to look at open top convenience. You can fold the whole top down, but you don't have to. The front of the top quickly flips open to let the sunshine in. Think of the convenience on days when the weather is constantly changing from sun to spitting rain. The Sunrider attaches to the body of the vehicle with a track system. This eliminates snaps of old-fashioned soft tops for Jeep and gives a continuous clean looking weather tight seal.Like any other Supertop, you can fold down the entire top without removal from the top frame and all hardware stays on the Jeep. No loose parts to get lost. All of your favorite Supertop features like removable (and replaceable) windows, EZ Open Tailgate hardware, black powder coated aluminum and steel hardware are part of the package. Each Sunrider is complete with every piece of hardware that you need. Most hardware is factory pre-assembled to cut down on installation time. Nothing extra to buy! The Sunrider is available for all '79-'00 Cj7 and Wrangler vehicles, in factory matched colors.
SKU: 11004 15
Category: Miscellaneous

DIGITAL TIRE GAUGE Maintain proper pressure in your vehicle's tires to minimize tread wear, increase gas mileage and improve handling Simply enter tire's recommended pressure on the gauge dials, push the "on" button and attach gauge to tire valve Compare actual pressurereading to recommended psi and add/reduce air as needed Easy-to-read LED display. Range: 5 to 99.5 psi. Accuracy: ±2% (1 psi). Long-lasting lithium battery included. Limited 2-year warranty.
Manufacturer: Slime
SKU: 10101-2003998

FACTORY-STYLE AND CUSTOM-STYLE REAR WINGS Beautifully made, quality constructed and easily paintable to match your car's color scheme A great way to dress up an older car or add extra, take-notice styling for a newer model Some drilling may be required, depending on application. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reachyou.
Manufacturer: JSP
SKU: 10101-2001872

SPRING SHACKLE LIFT KITS Provide either3/4" or 1-1/2" lift Kits include 2 heavy-duty steel shackles, high-tensile bolts and self-locking nuts For '72-95 Jeep® CJs and Wranglers 2 bolt positions (except Wranglers). Shackles for Wranglers have 1 bolt position to lift up to 2". For CJs, select kit for threaded type, front and rear. Kits for Wranglers accommodate front and rear.
Manufacturer: Perfornance Accessories
SKU: 10101-2005898

EXTRA-LONG "HOLDS ALL" RACK STRAPS Great when hauling larger items 1"W x 14"L stretch to 30"L Soldin pairs.
Manufacturer: ATV Logic
SKU: 10101-2007168

EZ CAM XR™ CAMBER KIT Corrects the handling and ride of your lowered car! Reduces wear on expensive performance tires Easy-to-install kitallows ±1.75° of camber correction 2 bolts included.
SKU: 10101-2005944

FUEL INJECTOR CLEANER Removes power-robbing deposits on fuel injectors and intake valves Uses patented AMFT technology to treat and lubricate the high-friction internal metal surfaces of your engine/transmission Proven patented formula bonds to the metal surfaces to minimize friction and to lower operating temperatures Simple maintenance resulting in a smoother running and longer lasting engine and transmission. Improves gas mileage, maximizes engine overall performance and stops engine knock and ping. Also helpsclean dirty carbs, combustion chambers, manifolds and ports. 12-oz. container.
Manufacturer: Prolong Super Lubricant
SKU: 10101-2000813

SNODANNA™ NEOPRENE FACE MASKS Keep warm during cold-weather activities and winter conditions Water-resistant stretchy neoprene material providesmaximum warmth br
Manufacturer: Zan Headgear
SKU: 10101-2009900

MIG WELDING NOZZLE REAMER For use with portableMIG welder 3 hardened steel blades ream splatter buildup from inside of nozzle. Approx. 4"L.
Manufacturer: Clarke Power Products
SKU: 10101-2007562

COVER-OVER HEADLINER KIT Replaces worn-out, sagging headliner on any vehicle with a board-type headliner Matching headliner material by the yard sold separately Can be easily installedover old headliner or on bare roof if old headliner has been removed. Headliner fabric covers entire roof area and is supported with wire bows (included) which must be fitted to roof. Headroom reduced by approx. 1/2". Some drilling and trimming required. Operation of dome light not affected. Kit includes headliner, mounting hardware and instruction. Kit does not include or require headliner board. For truck installation, molding is required around roofline. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. To receive a color fabric sample(s), call 1-800-603-4383 and request the color(s) you would like.
Manufacturer: Acme Auto Headlining
SKU: 10101-2002949

REPLACEMENT THROTTLE BODY INJECTOR ASSEMBLY Completely remanufactured and set to meet or exceed OEM specifications Replaces malfunctioning original to help restore performance, improve gas mileage and reduce emissions Disassembled, cleaned and re-engineered using factory-authorized methods Worn parts are replaced. Failure-prone parts are replaced with upgraded components.Pre-tested before shipment. Includes troubleshooting guide. Sold outright—no trade-in necessary. Subject to core availability. Assembly is returnable for exchange only; sorry, cannot be returned for credit or refund. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: ARI Rebuilders
SKU: 10101-2005653

DELUXE CONTOURED SKIRTED WINDSHIELD Enhances looks, improves aerodynamics and provides protection against the wind Unique 4-point adjustable handlebar and fork mounting For most cycles Durable 3/16" thick high-visibility acrylic windshield (available in clear of light gray tint) is approx. 30"W x 34"H overall (22"H from top of headlight cutout). Extended sides and lower leg skirts maximize protection for hands and legs. Leg shields are approx. 12"L from top of headlight cutout. Meets or exceeds DOT specifications. Special Mounting System. 4 small plates are chemically bonded to windshield—no drilled holes to cause breakage and cracking. Upper handlebar andlower fork mounting brackets fit onto these plates and allow trouble-free adjustments/alignments. Windshield installs/removes easily as needed. Mounting hardware has nonglare black finish. Cannot be shipped express. (A) Trimming may be required to clear radiator.
Manufacturer: National Cycle Inc
SKU: 10101-2000674

DRY-TO-WET CONVERSION KIT Convert your drynitrous system to a wet system for harder-hitting doses of nitrous Injects nitrous with the soft plume nozzle The finest atomization available! Kit includes fuel lines, nitrous lines, solenoid and nozzle.
SKU: 10101-2009824

Supertop! The name says it all. And it's loaded with state-of-the-art features. All Supertops come equipped with a patented track installation system. This eliminates snaps and give a continuous clean-looking weather tight seal. Supertops fold down on your Jeep without removal from the top frame and all of the hardware stays on the Jeep. No loose parts to get lost. Premium features include: Click-Shut two piece doors with flat paddle type handles, removable (and replaceable) windows, black powder coated aluminum and steel hardware.Each Supertop kit iscomplete with every piece of hardware that you need. Most hardware is factory pre-assembled to cut down on installation time. Nothing to extra to buy. Also has EZ Open tailgate hardware (for Wrangler and CJ7). VHS installation video is included with Supertops for use on vehicles up to 1995. Supertops are available for all Jeeps from 1955 to 2000 in a great selection of factory matched colors. (See additional pictures for additional information)
SKU: 11110 09
Category: Miscellaneous

LOW-BACK FRONT BUCKET SEAT Manufactured to exacting specifications at one of the largest original-equipment seating manufacturers! Features a poured-foam insert covered by heavy-duty automotive-grade fabric Not only looks great but is comfortable, too! For early model CJs but also fits Wranglers through 2002. An economical solution for replacing worn factory-original seats. Deep contoured seat with spring suspension is firm yet comfortable. Approximately 19-12/"W x 22"H x 18"D at base. Note: 1997-2002 Wrangler modelsrequire front seat adapter sold separately (Driver Side SKU# 50ZX9026N; Passenger Side SKU# 50ZX9027T).
SKU: 10101-2006975

A whole new way to accent the rear of your '97-'00 Wrangler! These heavy-duty aluminum pieces fit over the top lip of your rear bumper and the body lift and the tailgate liftover to protect the finish and look great. Choose bright aluminum or black finish. Some drilling required.
SKU: 13113 08
Category: Miscellaneous

AXLE BEAMASSEMBLY PARTS KIT For '66-68 Volkswagen Beetles (except Super) and Karmann Ghias with 4-hole brake drums Required to install complete axle beam assembly (Sold Separately)
SKU: 10101-2001071

COIL SPRING COMPRESSOR Fits inside any coil with an internally mounted shock up to 6"OD overall Single action turns central shaft For use on springs made of up to 3/4" diam. spring steel Smooth bearing action and heat-treated steel construction ensure quick and safe compression. Use with impact or hand tools. Noclamps required. Not for MacPherson struts. Not for use on Fiat vehicles.
Manufacturer: MIT
SKU: 10101-2004154

WIND-UP LED FLASHLIGHT Generate power anywhere, anytime! Built in wind-up mechanism generates the power to operate flashlight that has 3 LEDs! ABS body with polycarbonate lens Mechanical flywheel generator (high-speed and strength-saving) creates the electricity. Wind-up for 1 minute and operate flashlight for 40 minutes. Super-bright LEDs (15,000 MCD) give as much or more light as standardbulb flashlights. No battery to buy, replace or throw away. Great for: hiking, camping, around the house, power failures and roadside emergencies. Dimensions 2"W x 2"H x 5-1/2"L
SKU: 10101-2010116

3000 SERIES STEPGUARD® CENTER GRILLE GUARD WITHFREE $40 JC WHITNEY® GIFT CERTIFICATE Front-end protection plus a FREE $40 JC Whitney® gift certificate…order now!* Exclusive 2-1/4" diameter StepGuard® cross bar offers convenient access to hood or engine—a must for lifted trucks or high-ground-clearance SUVs Drilled one-beam profile with tough rubber extrusions Step area is compressed into the steel—not cut out—to retain its strength plus it's oversized for more grip No-drill frame-mount installation. Modular design speeds up installation and reduces shipping costs. Predrilled auxiliary light position in cross bar (lights not included). Black powder-coated finish. Limited 5-year warranty. Includes instructions. Complete Grille/Brush Guard also available (14910G). Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. *Gift certificate will be mailed separately.
Manufacturer: Go Rhino
SKU: 10105-2004838

POLYURETHANE LEAF SPRING AND SHACKLE BUSHING SET Greater spring stability during off-road driving Reduces vibration onthe street Precision engineered—the last bushings you will ever need to buy!
Manufacturer: Dee Engineering
SKU: 10101-2005973

EAGLE SEAT COVERS Set yourselfapart with this exclusive JC Whitney design! Detailed, full-color design features a soaring eagle and waving flag on a blue sky background Design is transferred to fabric through dye sublimation process…image will not fade, run or bleed Cover fits any high-back bucket seat (driver or passenger side) without armrest. Black 100% polyester fabric goes great with any interior color scheme. Machine washable. BUY 2 AND SAVE!
Manufacturer: Elegant
SKU: 10101-2006894

FRAME HEAD BOTTOM PLATE Repair rusted and dented plate with this perfect-fit, die-formed and shaped plate Heavy-gauge primer-coated steel prohibits rust Fits '65-79 Volkswagen Beetles Installs easily with screws, by welding or by riveting (welder or rivet gun not included).Finish with epoxy filler (sold separately) and paint.
SKU: 10101-2000415

FRONT STRUT BARS Eliminate flexing in front unibody andupper strut mounts for radically better handling and steering accuracy! Heavy-gauge aluminum bars with rigid steel mounts. Most available in silver, red, blue or high-tech carbon-fiber look. Easy to install.
SKU: 10101-2006188

75-WATT NOTEBOOK COMPUTER POWER INVERTER Now youcan use your notebook computer or other electrical devices anywhere there's a 12-volt power source Simply plug your notebook computer, DVD player, camcorder or video game into the inverter, then plug inverter into any 12-volt outlet or cigarette lighter Top-quality inverter built specifically to power electronic devices Gray iMac plastic housing with one 110-volt input. Low battery alarm. Overlead protection. 75 Watt continuous (150 Watt peak). 36" power cord plugs into 12-volt outlet or cigarette lighter socket. Approximately 5-1/2" x 4" x 1-3/4". Airline power adapter sold separately.
Manufacturer: Wagan
SKU: 10101-2001675

Yokohama Avid T4 Tire priced from $40.00 to $99.00. The Yokohama Avid T-4 allows true Yokohama-style driving enjoyment to be available more economically.The Avid T-4 provides performance levels of handling and grip along with long treadwear, enhanced ride comfort and reduced noise levels to meet a driver's everyday needs.
Manufacturer: Yokohama
SKU: Yokohama Avid T4 Tire
Category: Automotive Parts and Accessories Parts Tires

The latest and greatest in suspension for the serious off-roader, new TJ Rock Ready Kits include 6" or 8" coils & sub-frame assembly with integrated transfer lowering kit! The re-engineered geometry of the suspension(with extending flex links) allows for only 1.5 degree of chamber/caster change through a "full cycle" of the 4-link suspension. Machined front bumper stop spacers prevent excessive axle travel, and extended drop pitman arm compensates for the lift - providing smooth & easy steering. The adjustable Flex Track Bar relocates the track bar to thetop of the axle - thereby reducing the track bar angle and eliminating bump steer. It has 24" of total travel. This track bar configuration works with some other manufacturer's kits, but it will not work w/straight sway bar end links. D.O.T. certified stainless steel braided & coated brake lines with HD off-road fittings are 50 states legal. Front double quick disconnect sway bar endlinks, rear disconnect sway bar links, a replacement H.D. steering stabilizer and rear bump stop spacers round out these superior kits. 8" system include an adjustable flex rear track bar - optional on 6" lift.
SKU: 16117 501
Category: Miscellaneous

N-TERCOOLER Boosts HP on supercharged or turbocharged cars where a conventional nitrous system is not an option! Uses either nitrous or CO2 to dramatically reduce air inlet temperatures More power for your supercharged or turbocharged car! Dyno tests prove that a turbocharged Honda equipped with this unit increased its baseline by an astounding 52 HP! Just imagine what it will do for you! Easy bolt-on installation—mounts directly to theintercooler. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2005739

CHROME-PLATED FAIRING EDGE MOLDING Replace your original color-matched edgemolding with bright-chromed ABS plastic molding One-piece accents with reinforced mounting tabs snap easily into place just like originals Sold in pairs only.
SKU: 10101-2000613

FUEL INJECTION WIRING HARNESSES Complete harness with all OE factory style connectors Transplant your EFI engine without having to be an electrical expert Easier than ever to swap a fuel-injected engine into a non-EFI car!Plug & Play harness eliminates the need to modify bulky OE harnesses…no need to run to a junkyard to find one that will work. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Painless Wiring
SKU: 10101-2005644

HEADREST SHAFT COVER LIGHTS Silver housing, white lens and colorful LEDs create just a touch of light to the headrest area Easy to install…lights mount onto theshafts of the headrest Connect wires to your 12-volt system Easy to install and look great! Sold in pairs. On/off switch included. Recommended for show use only. Check local laws before ordering.
Manufacturer: APC
SKU: 10101-2003713

Borbet Type S Silver w/Machined Lip Wheels priced from $109.00 to $159.00. Borbet Type S Silver w/MachinedLip Wheels.
Manufacturer: Borbet
SKU: Borbet Type S Silver w/Machined Lip Wheels
Category: Automotive Parts and Accessories Parts Wheels

POWER CABLE 4 or 8 gauge 25-ft. spool available in red or black insulation Get the most out of your auto or home stereo system! 8-gauge cable recommended for peak output up to 500 Watts. 4-gauge cable recommended for peak output over 500 Watts?or if cableis to be used in a 20-ft. or longer single length.
Manufacturer: East Penn
SKU: 10101-2001594

1- TO 2-TON POWER PULLER WITH 2 HOOKS Allows a 1-ton power pull with 10-ft. lift or a 2-ton power pull with 5-ft. lift Convertible quick-change feature allows double pulling power using 2 or 3 hooks Heavy-gauge steel is galvanized against rust and hardened at all stress points. Drop-forged hooks handle heavyloads; steel frame and ratchet guard. Trouble-free automatic thumb-control let-down release for maximum safety. Quick-change pulley. With 13 ft. of 3/16" aircraft cable and heavy-duty, hardened frame bolts. Lightweight, easy to carry and store. Weighs only 6 lbs.
Manufacturer: Peak Power Products
SKU: 10101-2007852

"Smooth out your bed rails with the sleek, limited-edition look ofBushwacker’s SmoothBack bed caps. Guaranteed for life - the rugged Dura-Flex material won’t fade, crack or warp. Easy 3M tape-on installation. "
Manufacturer: Bushwacker
SKU: 362
Category: Automotive Accessories. Bed Caps & Bed Rails

Highly polished stainless steel Hood Hingepair perfectly matches factory mounting holes for easy assembly. Fits all CJs and Wranglers from '87-'95.
SKU: 13005 13
Category: Miscellaneous

"Get an advanced copilot with turn-by-turn voice commands and touch-screen controls packed into one simple unit. The Garmin StreetPilot C320 GPS Navigator comes ready to load withregional maps, using the included USB cable and MapSource software. "
Manufacturer: Garmin
SKU: 436
Category: Accessories. Digital Compasses & GPSs

BOW TIE BOLT KIT "Bow Tie" emblem stamped on each bolt head! Adds the finishingtouch to your Chevy's engine compartment Kit includes all bolts and washers (where applicable) for: intake manifold, valve cover, water outlet, water pump, timing cover, fuel pump, oil pan, distributor hold-down, exhaust header or manifold. Small block kit includes bolts for both extended and short water pump. Big block kit includes bolts for extended water pump only.
Manufacturer: GARDNER WESTCOTT
SKU: 10101-2005395

ELECTRIC SOLENOIDVALVE . Replacement for old or worn part
Manufacturer: Wolo
SKU: 10101-2009032

TRANSLUCENT AIR FILTERStainless steel filter with colored translucent plastic heat shield! Heat shield deflects heat to allow cooler air into engine for operating efficiency and long filter life Stainless steel filter never needs oiling Fits up to 3" intakes. 4" diameter x 5" high. Replaces existing filter. Stainless steel clamp included.
Manufacturer: Toucan
SKU: 10101-2005547

LEAF SPRING Corrects leaning, bottoming and rear-end sag restoring car to original height Improves traction and reduces sway for more complete control and safer, easier steering For American cars Oil-tempered heat-treated alloy steel for uniform strength and spring action. Feathered edges and inserts ensure smooth, quick action. Recommend installing in pairs to distribute weight equally for a more level ride. Note: Spring shackle bushings not included with springassembly. Stock numbers ending in "F" are shipped separately from factory. HD=Heavy Duty; SW=Station Wagon. Cannot be shipped express.
SKU: 10101-2005965

FLEXIBLE EXHAUST TUBING Choose T430 stainless steel or T304 anti-magnetic stainless steel T304 steel won't rust even in salt water usage! Extra-strong interlocked construction won't kink or unwind. Tubing wall thickness: 0.010" for 1-1/2" to 2-1/2" tubing; 0.018" for 3" to 6" tubing. Outside diameter is 1/8" larger than inside diameter (I.D.) size. Available in 5-, 11- and 25-ft. lengths (fully stretched—allow extra length for bends). T430 TUBING Good grade of stainless steel contains 17% chromium…resists rustin automotive use. Resists damage from fresh water and oxidizing chemicals (nitric acid, etc). Not for marine use. T304 ANTI-MAGNETIC TUBING Premium grade of stainless steel contains 8 to 10% nickel plus 17% chromium. Resists rust…even in salt-water applications. Excellent for automotive and marine use. Resists mineral salts, sea air and chemical environments. NOTE: SKU numbers ending in E arefreight shipped from JC Whitney warehouse by truck/air freight.
SKU: 10101-2006251

GASKETAND SEAL KIT Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2005532

EAGLE HEAD WITH FLAG BODY MAGNETIC GRAPHIC SET Himsl-designed freedom eagles with magnetic backing for quick installation, effortless design changesand quick removal Graphic follows body contours…can be cut to cross over door jambs and body gaps Fade-resistant .015" thick vinyl with magnetic backing won't fall off—it's been tested at 100 MPH! Make your car, truck, cycle or tractor a real standout with this patriotic accent. Set includes 2 large (5"H x 22-1/2"L) eagles/flags and 4 flame licks (1-1/2"H x 3"L).
SKU: 10101-2006577

12-SPOOL PRIMARY WIRE ASSORTMENT Stranded copper wire for excellent conductivity. Color-coded plastic insulation for easy hookup. Kit includes 2 spools of 18-gauge wire, 5 spools of 16-gauge and 5 spools of 14-gauge. Each spool has 25 ft. ofwire.
Manufacturer: East Penn
SKU: 10619-2007592

DOG BONE ELECTRICAL ADAPTER Theonly electrical adapter with a built-in handle to make unplugging easy! Convert RV power to accommodate any campground hookup Dog bone-style is more heat resistant than basic adapters All RVers should have an electrical adapter on hand since the campground they visit may not have the same amperage power supply. Ensures a dependable power source by easily connecting to RV campground's AC power with the Power Grip™ adapter. One-year warranty. Power Grip™ 30 AMP 25' Extension Cord sold separately (Item # ZX268579).
Manufacturer: Camco
SKU: 10101-2010366

BESTOP® REPLACE-A-TOP™ Use your factory-original frames and bows...will not fit with any aftermarkethardware Made with genuine Haartz™ fabric, same as our factory-original soft tops and in factory-matching colors Exclusive scoop-counted #10 YKK zippers for durability and easy operation DOT-approved clear windows or optional 31% tint on selected applications All windows and seams are heat-sealed for watertight construction Factory-spec T-135 industrial thread in all seams for mildew-resistance and strength Made in the USA If you have factory full steel doors on your '88-95 Wrangler, Replace-a-Top™ will not fit. See Bestop® Supertop™ for proper application Get the same fit, color and quality of a factory-original top for much less than dealer price! Simply install Replace-a-Top™ over your existing factory-original hardware. It's the most economical way to replace your old, worn-out fabric. The Bestop Closer Look Guide will give you detailed information about Bestop's most popular Jeep soft tops.
Manufacturer: Bestop
SKU: 10101-2002726

PREMIER RECLINING LEATHER SEATS "Big Ol' Texas" sew pattern for an updated look Adjustable pneumatic lumbar support for added lower back support High-gloss simulated burl-wood console Sewn-on map pocket on the rear of each seat. Genuine premium leather seating area with color-matched vinyl on the back and sides…just like OE. Designed for style and comfort. Soft, high-density, super-resilient virgin polyurethane foam padding plus the no-sag spring suspension ensure travel comfort and superior support. Adjustable headrests. Each seat adjusts independently and slides backward/forward 7". Fold-down center module features built-in hidden storage compartment under the seat for yourbeverages, CDs, cassettes and other valuables. Top of console includes padded armrest, drink holder, change tray plus an extra hidden compartment. Armrest folds up for third passenger seating. Kit includes driver and passenger seats, center console/seat module and seating frame. Seats will not fit trucks with existing integrated seat belts. Seat adapter brackets required for installation; sold separately. Shipped from factory in 4 cartons which may arrive separately. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: OUTLAND SPORT
SKU: 10101-2006948

HIGH-PRESSURE OIL RELIEF VALVE KIT Performance engine part for air-cooled Volkswagen Increase oil pressure from 40to 60 lbs. For air-cooled engines.
Manufacturer: EMPI
SKU: 10101-2005261

Heavy-duty light guards are Xtreme protection for '97-'00 Wranglers. Protects lenses from branch slaps on the trail, or just looks aggressive on the street. Sold in kits, choose only the parts you need, or the whole set. Works great with Xtreme Rear Sets. New hardware is included for installation. Tools needed are hex keys and a screwdriver. Some drilling on side marker sets. Black only. Made in USA. Will not fit the Sahara models.
SKU: 13107 32
Category: Miscellaneous

CUSTOM-FIT CARPETING FOR PICKUPS Choose nylon or polypropylene Detailed with sewn-in contours for a perfect fit Covers front section up to the seat with no exposed front floor space Exposed edges are protected/strengthened with reinforced binding. Padding adds a comfortable feel underfoot and insulates against noise andvibration. Color-matched/coordinated driver's heel pad protects a high-wear area. Adds new life to an older interior without spending a lot. Carpeting by the yard sold separately. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. To receive a color fabric sample(s), call (800) 603-4383 and request the color(s) you would like.
Manufacturer: Auto Carpet Systems
SKU: 10101-2007246

AIR VOLUME CONTROL REGULATOR Gauge accurately measures 0- to 160-psi in 10-lb.increments Gives you full control of air pressure of all air-driven tools with 1/4" inlet
SKU: 10101-2007667

CLEAR HEADLIGHT GUARDS Low-cost protection For all GL1500s Clear, impact-resistant acrylic guards are contoured to fit perfectly. Heat-resistant hook/loop fasteners for easy installation and remounting. Includes instructions. Extended guard covers headlight and right- and left-sideposition lights.
SKU: 10101-2003820

MANUAL REMOTE REPLACEMENT MIRROR Replaces damaged outside mirror perfectly Installs like original—noholes to drill Same construction and black mirror head as original (except where noted) Functions like originals. Save on high dealer's costs. Passenger's side mirror has convex glass.
Manufacturer: Cipa
SKU: 10101-2008314

Thebracket for the '97-'00 Wranglers attaches to the factory bumper without drilling.
SKU: 96080 51
Category: Miscellaneous

COMPLETE PERFORMANCE WIRE SETS 8mm wires for maximum spark energy 500 Ohms/ft. produces a hotter, longer-lasting spark Custom fit! TBI=Throttle Body Injection MPI=MultiportFuel Injection SFI=Sequential Fuel Injection
Manufacturer: Mr. Gasket
SKU: 10101-2005104

CARGO RESTRAINT SYSTEM The ultimate cargo net for any size load! Secures cargo better (with less movement) than less expensive flexible bungee nets Prevents gear from sliding around & damaging truck Approx. 6 x 7-ft. net fits all truck beds. Commercial-grade 2" polyester webbing is strong enough to secure the biggest loads. Multiple grommet locations accommodate a variety of different-sized loads. System can be used with most tie-downs (notincluded). Color: gun metal gray. Limited 1-year warranty.
Manufacturer: Bednet
SKU: 10101-2004621

Full length side Bars extend from wheel arch to wheel arch & support up to 300 lbs. You'll appreciate subtle details like the hemispherical endcaps & pressed steel step area with no-slip step plates. No drilling is required for installation.
SKU: 71201 800
Category: Miscellaneous

CAB FLOOR REPAIR PANEL Available for driver's or passenger's side For '73-87 Chevy/GMC full-size pickups, Blazer, Jimmy and Suburban models Die-formed steel is shaped like original,then painted with special primer to resist rust and allow easy painting. Weld-on or rivet-on installation (welder or rivet gun not included). Easy drop-in installation. Approx. size 24-1/2"W x 33-1/2"L.
Manufacturer: Tabco
SKU: 10101-2000397

CARGO AREA LINER/TRUNK LINER Lightweight leakproof rubber Won't crack or break for as long as you own your vehicle—it's guaranteed! Extra-high 3" lip contains sloshesAnti-skid surface prevents cargo slippage. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2007463

MECHANICAL SECONDARY RACE SERIES CARBURETOR Affordable high-performance racing carb beats the competition! Billet throttle base plate and metering block means no warping or porosity problems Tunable features allow easy customization High-flow main body is dyno-proven horsepower and torque gains. Billet throttle base plate features a welded throttle shaft with power valve blowout protection. Solid billet metering block.
Manufacturer: PROFORM
SKU: 10101-2009461

HEAVY-GAUGE STEEL BOLT-ON FRONT FENDER Replaces rusted or dented fender perfectly Heavy-gauge steel For Jeep® vehicles Available for driver's or passenger's side. Trouble-free bolt-on installation. Ready to install?drilled mounting holes and prepunched flanged holes. Primer coated. Normal surface prep required beforepainting. Cannot be shipped express.
Manufacturer: Omix Ada
SKU: 10101-2000351

AIR SCOOP Improves airflow throughvents Installs easily—no drilling required Made to withstand a lot of hard riding Increases the efficiency of heater and air conditioner.
Manufacturer: Smittybilt
SKU: 10101-2006521

FLEXIBLE EXHAUST HOSES, ADAPTERS AND CONNECTORS Patented molded construction ensures free flow of exhaust fumes and full conformance to OSHA standards Convoluted construction maintains 250% elongation and 1750 lbs. tensile strength even after crushing by a vehicle Designed to withstand the rigors of automotive shop service Maintains flexibility and durability while withstanding exhaust pipe and gas temperatures up to 600° F.Adapters and connectors sold separately.
SKU: 10101-2007703

CYCLE WHEEL TIE-DOWNS Can be used to hold down small gear on cycle or ATV rack Available inblack with yellow stripe Secures wheel to trailer for greater stability 1" x 36"L polypropylene strap has spring-release nickel-plated steel buckle.
SKU: 10101-2004415