4-2-1 ONE-PIECE HEADER @ Automotive online store

4-2-1 ONE-PIECE HEADER Up to 2 lbs. lighter than 2-piece headers Perfect combination of clean look, light weight and superior ground clearance Mandrel-bent tubing Two CNC-machined middle flanges. CARB exempt (EO D-370-8). Shipped separately from factory. NOTE: SKU numbers ending in F are factoryshipped and may take a little longer to reach you.
SKU: 10101-2006325

Continental Trac A/T Tire priced from $62.00to $115.00.
Manufacturer: Continental
SKU: Continental Trac A/T Tire
Category: Automotive Parts and Accessories Parts Tires

The JET Performance Power-Flow’s innovative bore design gives you gainsin the mid-range power band and increases overall fuel economy without the annoying whistle.
Manufacturer: Jet
SKU: 350
Category: Automotive Accessories. Air Intakes

Treat you Jeep Wrangler or CJ to a brand new top with one of these economical kits by Bestop. See again through crystal-clear windows, or the new tinted window version. Replacement tops are designed to fit like a glove over the factory original top and door hardware. Installation is quick and easy. Just cut off the old and slip on the new. Factory-match colors assurethat "showroom new" look. Tops are now available with Sun-Block windows for the three rear windows, instead of the standard clear windows. Door skins and all windows (zip-in for Wrangler) are included in all Replace-a-Top models.Please note that Bestop Replace-a-Tops will ONLY fit over the original top and door frames which were supplied with the vehicle new. If in doubt as to the origin of your top and door frames, please use our "LivePerson" customer service to contact one of our representatives or call toll free to speak to our customer service at 1-800-745-6037 (US and Canada) or 610-701-3336 for international customers. Original Top Replacement Tops are manufactured by Bestop to the same exact OEM standards as the tops they make for major manufacturers. ** Door Skins also available separately.**
SKU: 31032 04
Category: Miscellaneous

MOTORCYCLE BATTERY HYDROMETER 5 color-coded balls show battery's condition 5"L hydrometer stores in acid-proof case Gets into small motorcycle batteryfill holes
SKU: 10101-2006082

MULTICOLORED EAGLE EMBLEM WITH AMERICAN FLAGS Emblem mounts to any flat surface with self-adhesive backing Self-stick backing adheres to metal, plastic and fiberglass Superbly detailed cast metal emblem adds sparkle and style to any cycle! Patriotic red, whiteand blue crossed stars-and-stripes flags are behind a spreadwing eagle.
SKU: 10101-2006678

ENGINE-COOLING FAN - ELECTRIC Less than 3-3/4” thick for easy installation on all vehicles! Replaces power-wasting, engine-driven fan Can be used as an auxiliary cooling fan on air-conditioned or trailer towing vehicles Built-in shroud improves airflow Choice of 3 sizes...puller or pusher with or without thermostat Powerful pancake-style motor, 10 plastic blades, blade guard. Models with adjustable electronic thermostat go on automatically at 150°-240° F; models without thermostat include manual on/off switch. Fans canoperate as a pusher (mount in front of radiator) or puller (mount in back of radiator). Includes nylon installation rods (mount through radiator core), hardware, instructions. 12V. Please note: Vehicles that require additional cooling or vehicles with large V8s should use 2 fans—both in front or in back.
Manufacturer: DERALE
SKU: 10101-2000833

HATCHBACK-STYLE 2-WAY STEREO BANDPASS SYSTEMS Angled box design ensures effortless installation(and a great fit) in hatchbacks, pickups, van…almost any vehicle Full stereo sound without spending a fortune Frequency response: 30 Hz to 36 kHz One top-quality carpeted MDF enclosure. Two high-power polypropylene woofers. Two super-horn piezo tweeters. Two bass reflex vents for added bass response. Two black steel waffle grilles. Specially-treated black rubber edge suspension. Bumped and vented motor structure. High-temperature Kapton voice coil. Quick-connect input terminals. 4-ohm impedance. Click on item SKU# for additional information.
Manufacturer: Pyramid
SKU: 10101-2001241

STEERINGSHAFT Replace worn or defective originals King bolts and link pins also available Complete with universal joints.
SKU: 10101-2006018

SUSPENSION CONTROL ARM BUSHING KIT Tough black polyurethanebushings withstand hard performance use to outlast and outperform stock rubber bushings…a step up from original! Ensures better handling and faster responds Kit includes upper and lower bushings (without shells, with sleeves) for right and left front suspension.
Manufacturer: Prothane
SKU: 10101-2005797

CYLINDER SHROUDS, COOL TINS AND ENGINE HARDWARE KIT Perfect replacement for original or great add-on accessories Available in 2 finishes For Volkswagens with Type I orType II engine
Manufacturer: Dee Engineering
SKU: 10101-2005355

Have your tire size available when you order because Bestop makes several different sizes of tirecovers. Why? So they fit perfectly without puckers or gaps and look absolutely great. If you want a tire cover that fits, buy a Bestop tire cover.
SKU: 61071 15
Category: Miscellaneous

Here's a great way to lift a '93-'98 Grand Cherokee to fit 30" and most 31" tall tires without spending lots of time and money in the process. It's a simple yet wellengineered method of suspension lift. The Kit includes coil spring spacers for the front & rear along with longer bump stops. Allows for greater tire clearance without compromising the factory ride quality and with a less complex installation.
SKU: 76058 704
Category: Miscellaneous

These are the original and only genuine Bikini Tops allowed to use the name. They are the #1 accessory for your Jeep. Bestop quality will long outlast the competition. Quick to attach and small to stow away, these sun tops to more than just look good. They protect your font seats and dashboard from sudden showers,and they keep them cool when parked in the blistering sun. Safari Bikini Tops take the idea a step further, and extends the coverage all the Way to the rear of your Jeep. Factory-matched colors in genuine (original spec) Haartz material. **need channel #11122.00 to install**
SKU: 11131 15
Category: Miscellaneous

SLIM-LINE MINI 55-WATT HALOGEN DRIVING LIGHT Replaceable 55-Watt H3 Halogen bulbs Clear glass lenses Only 2" high for effortless mounting even in the most compact spots. Matte black high-impact plastic housing are approx. 6-5/8" W x 2"H x 3-1/8" D. Includes 2 lights, wiring, switch, hardware and instructions. For 12-volt negative-ground systems. Replacement driving lens sold separately.
Manufacturer: Eagle Eye
SKU: 10101-2003728

6" X 9" 4-WAY SPEAKERSYSTEM 4 separate speakers in one for the best sound around! 300-Watt peak power Unbelievable 100-oz. magnet circuit! Big power-handling capacity. Ferrofluid-enhanced aluminum voice coil. Low-down bass, smooth mid-tones and the sweetest highs possible! Frequency response: 40-25,000 Hz. 4-Ohm impedance. Wiring, mesh grilles, hardware and instructions included. Each speaker has a 6" x 9" white injected poly woofer, 3" polymer midrange, 2" dome tweeter and 1/2" ceramic tweeter. Sold in pairs.
Manufacturer: Pyramid
SKU: 10101-2001256

SUSPENSION BUSHINGS Absorbshock better and eliminate bushing play Precision designed and made to exact tolerances Improve the handling and performance of vehicle. Prothane™ is a leader in the field and famous for the consistent superior quality of its products. Bright red for a hot performance look.
Manufacturer: Prothane
SKU: 10101-2005786

Built for hard core off road enthusiasts with 1/8" thick steel plate and reinforced with 1/4" thick center reinforcements. Semi-hidden winch mount design accepts all major brand winches including Warn, Superwinch, Ramsey & Mile Marker. Mounts to the vehicle frame utilizing existing bumper mount holes. The winch fairlead mounts securely to the front of the bumper. Features mounting holes for auxiliary lighting and tow hooks. Black textured powder coat finish.
SKU: 78006 802
Category: Miscellaneous

ELECTRICAL MANUAL Covers engine starting/charging systems, lights, gauges, accessories.Also details how to read diagrams, use test equipment.
Manufacturer: Haynes Manuals
SKU: 10101-2006752

FRONT HEADLIGHTSECTION STEEL REPAIR PANEL Repairs or replaces rusted or damaged area perfectly For driver's or passenger's side For Volkswagen Karmann Ghias Extends 2-1/2" back from tip of fender. Does not include headlight and assembly. Restores original look. Welds or rivets on easily. Die-formed 20-gauge steel. Primed—some surface preparation required before painting.
Manufacturer: Tabco
SKU: 10101-2004883

HAIL BUSTER BODY REPAIR TOOL KIT Chosen by the pros—body shop workers, auto dealers, paintless dent technicians, etc. Specially-designed to repair minor damage (shallow door dings, light hail damage, etc.) easily and quickly Most effective on smaller dents, but can remove dents up to the sizeof a baseball The Hail Buster Kit is perfect for dents smaller than 1-1/2" diameter. Twisting feature simplifies operation. No fillers, no painting and safe for all OEM finishes! Easy as 1, 2, 3! Attach a glue stud to the center of the dent using the special ultra-strong glue, attach the tool and pull out the dent! Use the Release Agent to remove any left-over glue on the painted finish. Mini glue gun, glue stick, Release Agent, glue studs, finishing tool and detailed instructions included.
SKU: 10101-2004078

LUBRICANT-BASED R-12 AND R-134A A/C FLUSH Effective flushes sludge anddebris from the A/C system or component Non-flammable lubricant-based flush can be mixed with residual mineral oil, POE and PAG oils Compatible with system components, O-rings, seals, gaskets and hoses High-solvency rate. Ozone safe and biodegradable. Use with an A/C flush kit for optimum results. One quart. Note: Not for sale in Wisconsin.
SKU: 10101-2002880

INTERIOR CARGO TRAY Temporary extra storage space for times when you have extra cargo! Removes easily when notin use Can be used with rear seat folded forward or down Provides additional cargo-carrying capacity. Around town or around the country, load carriage has just improved. 100-lb. capacity.
SKU: 10101-2004632

MINI BULLET AUXILIARY LED MARKER LIGHTS WITH CUTOUTS AND SIDE LENSES Custom styled! Extra styling! Increased illumination! Added nighttime visibility! Light bank plus custom side cutouts add up to extra lens area on both left and right sides of lights! 3-section light bank includes15 LEDs (5 in the center and 5 on each side) 12-volt lights mount on saddlebags, fairing, travel trunk, fender or anywhere space permits. 2 pigtail wire connections allow use as markers, running lights or as auxiliary turn signals or auxiliary brake lights. Bullet-shaped showroom chrome-plated die-cast metal housing features approximately 1-1/8"L cutouts and impact-resistant plastic lenses. Overall size without 1/4"H pedestal: 2-1/2"L x 1" diameter. Include removable 8mm threaded hollow mounting stem plus hardware. Drilling required for mounting. Sold in pairs.
SKU: 10101-2003405

CUSTOM-FIT HEADLINERS AND MATCHING HEADLINER MATERIAL Great custom tailoring for your vehicle Completely sewn and ready to install For cars, full-size vans and Suburbans Made from factory original patterns. A variety of colors available. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. To receive acolor fabric sample(s), call 1-800-603-4383 and request the color(s) you would like.
Manufacturer: Acme Auto Headlining
SKU: 10101-2002941

2" DIAMETER ILLUMINATED AMMETER GAUGE Displays -60 to +60 amps—black dial, white numerals and black or chrome bezel Flashing indicator lights show only that systems are working Gives actual reading Chromed mounting panels include all fittings and instructionsfor 6- or 12-volt.
Manufacturer: Equus
SKU: 10101-2008875

MODEL RS1100 REMOTE STARTER WITH KEYLESS ENTRY AND 1 TRANSMITTER Start your vehicle's engine and accessories from the convenience of your home or office! Programmable run time of 5, 10 or 15 minutes with 400-ft. range Loaded with features! Keyless entry with built-in relay. Remote trunk release plus visual run-time confirmation, dome light supervision and parking light confirmation. 4-button remote transmitter with dedicated start/stop buttons. Fully programmable by remote. Pit-stop feature lets you pop into a store (with your key) while vehicle continues to run. Automatic cold start. Tach or tachless operation. For fuel-injected vehicles with automatic transmission only. To speed up installation, order T-harness (sold separately). If your vehicle has a factory anti-theft system, order bypass module (sold separately). Limited lifetime warranty. Note: Installation requires splicing wires into the ignition harness. Please read and follow directions very carefully. For technical assistance or installation information, call the toll-free installation help line at(800) 878-8007 or go to www.bulldogsecurity.com for online assistance.
Manufacturer: Bulldog
SKU: 10101-2001427

RUNNING BOARD STRIP LIGHTS 8" leads can be wired into your 12-volt lighting system Available in 3 lengths to customize and dress up vehicle For vans, pickups, RVs and 4x4s Make it easier to see at night and in bad weather. Anodized aluminum channels with built-in amber light strips attach easily—some drilling required. Low current draw. Hardware included. Soldin pairs.
Manufacturer: Vista
SKU: 10101-2003502

STONER CARPET CARE KIT Preferred by professional auto detailers, dealers, collectors and enthusiasts to clean, sine and protect their vehicles More shine in less time! Kit Includes: XENIT Natural Citrus Cleaner and Remover (removes adhesives and other sticky substances) Upholstery and Carpet Cleaner Fabprotex Fabricand Carpet Protector One nylon carpet brush One cotton towel
Manufacturer: Stoner
SKU: 10101-2000722

STEREO DIN CONTROL PANEL Uses the empty stereo DIN slot, the empty space in your dash orglove compartment, etc., to create the ultimate racing control panel Accepts up to 4 cover switches (sold separately) Essential for all kinds of lights (fog, HID, strobe, interior), gauges, neon kits, nitrous and more Includes 2 different-size DIN plates, brackets and hardware.
SKU: 10101-2005009

CAL-VU SPORT MIRRORS Add an aerodynamic, sporty look to your pickup Manual-to-electric conversionkit available separately Order the manual mirrors to replace originals or add a new look. Order the electric mirrors to replace existing electric mirrors (plugs into original-equipment harness) or to convert manual mirrors to electric (requires conversion kit sold separately). Numbers ending in "F" are shipped separately from factory.
Manufacturer: Street Scene
SKU: 10101-2008355

TORQUE PLUS HP™ TURBO DIESEL POWER KIT Extremely versatile and completely adjustable to suityour vehicle and your needs System uses LP gas which acts as a catalyst with the diesel fuel to burn more efficiently (almost 100% burn vs. 70% to 80% normally) Adds up to 75 HP, 125 ft./lbs. of torque Increases horsepower, torque and fuel economy. You can turn system on or off at any time from inside the cab. Precision engineered and calibrated for maximum efficiency and dependability. Propane can also be used, but the power increase will not be as constant as the LP gas. For all GM 6.5L and Duramax, Dodge Cummins and Ford Power Stroke turbo diesels. Complete with everything for installation on your turbo diesel except the LP gas storage bottle. Includes converter, filter solenoid, load valve, venturi fitting, water fittings, mounting bracket, high-pressure hose and fittings, wiring, illuminated toggle switch, hose clamps, electrical connectors, vapor line hose and instructions. LP gas storage bottle can be purchased where agricultural products or forklifts are sold. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Wegner Automotive Research
SKU: 10101-2005762

AUTO ELECTRICITY & ELECTRONICS MANUAL Covers principles, construction applications and diagnosis For all makes and models of cars. Includes everything from the basics (soldering and the use of test lights) through detailed descriptions of special tools and equipment. Two full chapters on wiring with clear, easy-to-read diagrams. Definitions of technical terms, precise methods of troubleshooting plus information to make rapid repairs. Also covers air bag, anti-lock brakes and electronictransmission/transaxle control systems. Over 520 pages. 1300 illustrations.
Manufacturer: Goodheart Wilcox
SKU: 10101-2006751

REVERSE IDLER GEAR OEM #640417 For Jeep® T-90 transmissions For '46-78 Jeep® vehicles using T-90 3-speed transmissionswith the following tag numbers: AS1-T90C; AS3-T90C; AS1-T90L; AS2-T90L; AS3-T90L; AS4-T90L; AS5-T90L.
Manufacturer: TOPLINE
SKU: 10101-2001010

MASTER LINK REPAIR KITHelpful for emergency roadside repairs Order by chain size (standard or heavy-duty) 3-pc. kit includes pin link, cover plate and spring clip Note: For maximum safety, spring clips should only be used once.
SKU: 10101-2001020

MYLAR® TAPE Ensures neat, professional-looking seams Reflects heat and prevents absorption of dirt, fuel, oil, water, etc. in insulation Heat-resistant acrylic adhesive ideal for engine compartmentsIdentical to Mylar® aluminized 1/2-mil. facing. Attractive and easy to clean. 3"W. 18-yard roll.
SKU: 10101-2002967

PROTECTIVE COVERS Cover made of Kimberly-Clark's new Sentrex™ fabric Soft and water-resistant fabric protects against the sun's UV rays, rain and snow Breathable fabric allows any trapped moisture to evaporate. Also stops bird droppings, tree sap, etc. from ruining finish. Light gray color is slightly reflective to help prevent sweltering heat buildup inside the van. Dust-proof when used indoors. Non-abrasive cover slips easily over van. The elasticized front andrear hems and tie-down cords (slip through the reinforced, non-scratch grommets) hold cover in place. Double-stitched, overlapping seams for greater strength. Washable and fast-drying—no stretching or shrinking. Folds up easily and stores compactly. Choice of 3 sizes. Note: If van has been converted and includes exterior accessories (rear-mounted spare or ladder), we recommend ordering the next larger size.
Manufacturer: Covercraft
SKU: 10101-2004574

HOOD-TO-COWL SEAL For all hardtops and convertibles Custom-extruded and molded automotive-grade rubber with smoothfinish like original Replaces torn, cracked or missing original perfectly. Helps restore like-new look. Eliminates water leaks, whistling and rattles.
Manufacturer: Soff Seal
SKU: 10101-2008593

CENTRIFUGAL ADVANCE DISTRIBUTOR High performance Modified "009" advance ensures maximum power curve for smoother, faster acceleration and throttle response Centrifugal advance eliminates vacuum chamber andpossible diaphragm failure, power loss during acceleration. Easy to install—replaces original perfectly (vacuum outlet in carburetor must be plugged). Includes points, condenser, rotor and cap. Fits the following: 55-79 Beetle, Super Beetle, Bus and Transporter; 56-74 Karmann Ghia; 63-74 Fastback and Squareback; 73-74 Thing. Replacement tune-up kit for distributor (includes points, condenser, rotor) and replacement cap sold separately. Note: For carbureted vehicles only; will not fit vehicles with fuel injection. Not for sale or use on California pollution-controlled motor vehicles.
Manufacturer: BOSCH
SKU: 10101-2005083

FLAME BUCKET SEAT COVER Black plush velour seat covers overlayed with a bright flame design The perfect alternative totraditional flame seat covers keeps your seat looking great even after heavy use Hot cover-up for any bucket seat. Cover has plush velour front with stretch knit back and cushioned backing for extra comfort. Installs easily in minutes—no tools needed. Does not fit over armrest.
SKU: 10101-2010251

12-VOLT AIR COMPRESSOR AND CARRYING CASE Simply open the case, plug into the lighter socket, attach chuck to tire and flip a switch Powerful 260-psi compressor adapts to inflateair mattresses, camping equipment, basketballs, etc. Self-contained carrying case also includes 28" air hose with quick-connect chuck and 10-ft. power cord with cigarette lighter plug. The easy-to-read 2" diam., 270° sweep gauge measures 0- to 260-psi. For use at night, illuminate work area by removing the 2" diam. high-intensity work light and plugging the 10-1/2 ft. power cord into the cigarette lighter socket or into the 12-volt outlet built into the compressor case. Adjustable magnetic base allows light to be positioned right where it's needed. Cord retracts neatly into the light housing. Heavy-duty blow-molded plastic case. 11" x 9-1/2" x 4-3/4". On/off compressor switch.
Manufacturer: Autotek
SKU: 10101-2007531

Eibach Anti-Roll Kit priced from $242.00 to $491.00.

While the Eibach Pro-Kit Springs represent the major tuning device for your suspension, additional roll stiffness can be achieved by using the Eibach Anti-Roll Kit. Anti-roll bars furtherreduce body roll and allow fine tuning of your vehicle's suspens
Manufacturer: Eibach
SKU: Eibach Anti-Roll Kit
Category: Automotive Parts and Accessories Parts Suspension

STAGE 2 SUSPENSION 4" LIFT KIT Lifts front 4", rear 2-1/2" Front leaf spring, frontshock kit and shock boots sold separately For 1999 Ford Super-duty pickups Kit includes: full-length rear add-a-leaf springs and 1" billet blocks with U-bolts; 2 front and 2 rear ES 3000 gas shock absorbers (boots sold separately); track arm bracket (allows centering of axle); forged dropped pitman arm to retain all factory steering geometry; polyurethane heavy-duty bump stops; Pro Comp™ sway bar end links for full articulation. Requires Pro Comp 4" front leaf springs (sold separately) NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Explorer Pro Comp
SKU: 10101-2009180

When the repair job is difficult, you need all of the information and help that you can get. Chilton repair manualscan walk you through jobs from basic maintenance, to driveline and engine overhauls. Accurate photographs and drawings show a vehicle just like yours as you work. Each manual features vacuum and wiring diagrams (except '45 - '70 CJ Manual: Wiring only). A must for do-it-yourselfers.
SKU: 19008 01
Category: How-To Guides

V-FORCE POWER CONTROL MODULE Modifies ignition curve and air/fuel ratio for maximum horsepower and accelerationDramatically improves 1/4 mile ETs Easy "plug 'n play" under-the-hood installation Designed with a 20MHz RISC microprocessor to optimize the ignition spark advance and recalibrate the fuel map. LED readout. On/off override switch.
Manufacturer: Jet
SKU: 10101-2005093

CUSTOM-FIT DUALFRONT SPEAKERS Mount in same space as single (mono) original factory speaker—retains look Plug directly into Custom Autosound® radios (sold separately) Feature large cobalt ferrite magnets, high-performance tweeters and foam bases. High frequency response. No cutting required. 2 speakers included. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Custom Autosound
SKU: 10101-2001250

The Aluma Tire Stop is sturdier than a stock stamped tire stop. Makes a great cellular antenna mount. You can't bend this one! Aluminum construction fits all CJ & Wrangler vehicles through '95. Mounts to factory holes with existing hardware.
SKU: 13008 02
Category: Miscellaneous

SOUND-DEADENING PADS Waterproof rubberized pads cut easily. Can be heat treated (up to 300° F) to mold to irregular or embossed surfaces. Self-adhesive backing for easy installation. Meet OEM specifications. Available for floor boards, door panels and vertical surfaces.
Manufacturer: Evercoat
SKU: 10101-2002976

These new Fender protector panels match your other diamond plate and cover previous rock-chips andbranch slaps while protecting your front fenders from further damage. Attractive diamond plate rounds out your very aggressive look.
SKU: 12532 02
Category: Miscellaneous

ALUMINUM AIR INTAKE KITS ANDCOLD-AIR EXTENSION KITS Increase power and add a performance look Polished 6061 aluminum tubing is mandrel bent to fit your car perfectly The diameter of tubing is custom formed for each application, ensuring the best possible airflow NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Injen Technology
SKU: 10101-2005541

PAD FOR TRANSMISSION MOUNT For installation of transmission mount on '53-64Ford pickups with 332-428 V8 engine
Manufacturer: Trans Dapt
SKU: 10101-2001024

Koni Sport Strut priced from $124.00 to $266.00.

KONI Sport shock absorbers (painted yellow) were developed for sporting drivers by focusing on exceptional road holding and handling properties, combined with an acceptable levelof comfort. KONI Sport shock absorbers are also available as part of KONI
Manufacturer: Koni
SKU: Koni Sport Strut
Category: Automotive Parts and Accessories Parts Suspension

Add a racy touch as you cover your cargo with a classic! Speedsturr Wing Lid joins a half-century tradition you candrive all over town.
Manufacturer: Gaylords
SKU: 273
Category: Automotive.Tonneau Covers

Complete Jeep tune-up kit. All you need to tune up your vehicle all in one box. Kits include: Oil Filter - OEM specifications (USA made), Air Filter - Premium Quality, Spark plug wireset - High performance suppression cable, Cap & Rotor - USA made, Spark plugs - Champion Brand and a Fuel filter.
SKU: 55126 001
Category: Miscellaneous

We have all of the necessary accessories to make your installation and use of the new winch complete. Each Winch requires a mount plate, and a hardware kit appropriate for the year of your vehicle. We also have fairlead covers, and full covers. Don't forget the essential pulley blocks, chains and recovery straps! Mount plates are #12119.40 ('97-'00 Wrangler), #12119.300 ('87-'95 Wrangler) and #12119.200 ('45-'86 CJ) Chain with grab hooks #92141.500
SKU: 92141 500
Category: Miscellaneous

The finishing touch for your vehicle. Smooth fitting tailored Spare Tire Covers are available in many factory-matched colors. Looks great with a matched Bikini Top too! Order by tire diameter for the best custom fit. 5 sizes and most factory match colors to choose from.
SKU: 91072 17
Category: Miscellaneous

CUSTOM-FIT CLASS III RECEIVER HITCH For trucks, SUVs, vans and cars Revolutionary rust-resistant finish exceeds 500-hour spray-testing—that's equal to 5 winters! Custom designed for easy bolt-on installation to vehicle's frame with minimal or no drilling for most applications Up to 10,000-lb. GTW (Gross Towing Weight) when used with a weight-distributing hitch, 3,000- to 6,000-lb. weight-carrying capacity, 300- to 600-lb. tongue weight. Long, wide frame brackets for maximum strength and load distribution. Attach to vehicle's frame with minimal or no drilling. Long, wide frame brackets for maximum strength and better load distribution. Dip process coats inside of receiver channel—the first place rust normally occurs. Includes wiring connector bracket for easier electrical hookup and no dangling wires. Accepts 2" square ball mounts in a variety of lengths, drops and rise to level trailer tongue. Ball mounts sold separately. Meets or exceeds SAE standards. Do not exceed rated tow capacity of towing vehicle. Limited lifetime warranty. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. SKU numbers ending in E are freight shipped from JC Whitney warehouse by truck/air freight. How To Order Trailer Hitches. Determine the Gross Towing Weight (GTW) and tongue weight (TW) of your trailer. The GTW is the weight of the trailer fully loaded and ready for towing. The TW is the downward push exerted on the hitch ball by the trailer coupler. Check your owner's manual to find the maximum GTW and TW for your vehicle. Important: Do not tow the trailer if either the GTW or the TW exceeds the towing vehicle's maximum towing capacity. Order ball, ball mount and wiring connectors separately. Wire code letters indicate the connectors or converters that are recommended for the Class III hitch. Other accessories that may complete your desired towing package: ball mount; trailer ball; pin and clip; receiver tube cover; hitch lock; safety chain; bike carrier; taillight connector; plug-in T-connector; taillight converter; brake controller; weight distribution; sway control;hitch light; transmission cooler. Wire Code Letters P Power isolation converter is required C Standard converter is required W 4-wire connector is required T T-connector harness with necessary built-in converter or power converter may be available (plugs directly into your vehicle's wiring harness) Order all converters and connectors seperately. Weight Rating (in lbs.) With Ball Mount With Weight-Distributing Hitch Rating Code GTW TW GTW TW F 3,000 300 4,000 350 G 3,000 300 5,000 550 H 3,500 300 3,500 300 I 3,500 300 5,000 550 J 3,500 300 6,000 600 K 3,500 500 10,000 1,000 With Ball Mount With Weight-Distributing Hitch Rating Code GTW TW GTW TW L 5,000 500 5,000 500 M 5,000 500 7,500 750 N 5,000 500 8,000 800 O 5,000 500 10,000 1,000 P 6,000 600 6,000 600 Q 6,000 600 10,000 1,000 GTW=Gross Trailer Weight TW=Tongue Weigh
Manufacturer: Hidden Hitch
SKU: 10101-2009930

HYDRAULIC STEERING STABILIZERS Prevent steering wheel "kick" caused by ruts and potholes Ensure safer, easier handling at all times and over all roads Choose heavy-duty or extra-heavy-duty Reduce wear on tires and front-end parts. Act like a powerful shock absorber to protect steering systems against excessive side-to-side motion. Eliminate constant fighting with steering wheel. Allow complete control when carrying an unbalanced load or when steering balance is upset after original tires are replaced by larger, wider ones. Extra-heavy-duty units are 2-3/8" OD with 1-3/8" bore and 9/16" chrome-plated induction-hardened rod. Heavy-duty are 1-3/4" OD with 1-3/16" bore and 1/2" chrome-plated induction-hardened rod. Replacement units reuse factory mounting brackets. Easyto install. No special tools, welding or modifications needed. Hardware and instructions included.
Manufacturer: Rough Country Suspension
SKU: 10101-2006042

Excellent power producing exhaust systems for the enthusiast who wants the most from his or her Jeep. These systems are engineered to give you maximum pulling power and feature heavy duty construction for off-road use. Features smooth, mandrel bent, 14 gauge aluminized tubing for non-restrictive flow. The Superflow muffler's fully welded case has baffled chambers to produce more power and a mellow sound. The polished stainless exhaust tip will not rust. Installe easily behind the catalytic converter.
SKU: 17606 01
Category: Miscellaneous

CHROME-PLATED GAS TANK TOPCOVER Replaces dull original black cover perfectly! Easy to mount For '99-2000 Yamaha XVZ1300 Royal Star Venture models Showroom chromed die-cast ABS plastic cover. Mounts with existing hardware.
SKU: 10101-2006626

CHROME-PLATED COIL COVER Custom dress-up sparkle for your bike! Mounts to coil bracket using existing hardware ReplacesOEM #31606-65TA.
SKU: 10101-2005466

AUTOMATIC TRANSMISSION SUPER REBUILD KIT Precision-made parts replace worn parts perfectly! All parts meet or exceed original-equipment specifications Kit includes everything needed to restore smooth, efficient transmission operation. Parts are designed for extra-long service life. Front band, all friction plates, steel plates, all rings, most-used bushings, front and rearseals, filter, modulator (where required), complete gasket and rubber set included.
Manufacturer: SPX Filtran
SKU: 10101-2001031

TRIM RINGS FOR STANDARD & RALLY-STYLE STEEL WHEELS Original-style retention system Choose from chrome-plated ABS plastic, chrome-plated stainless steel, chrome-plated steel & stainless steel Grip-tight fasteners snap into existing wheels. For all wheels that accept full wheelcovers. Please Note: Cannot be used with full wheel covers. Set of 4.
Manufacturer: Coast To Coast
SKU: 10101-2003856

ABOVE-THE-WRIST LEATHER CUT-OFF GLOVES Black drum-dyed cowhide leather—soft, supple, lightweight & unlined for a better grip, surer control Cut-off finger design for freedom of movement Popular above-the-wrist styling! Adjustable leather strap with hook/loop closure on backof glove ensures a snug fit plus effortless on/off.
SKU: 10101-2000063

"Putco Virtual Horizontal Grille adds a contemporary look to your truck or SUV. Installs over existing manufacturer’s grill. No drilling, cutting or removal of anyfactory grille component required."
Manufacturer: Putco
SKU: 135
Category: Automotive.Accessories.Billet Grilles