HIGH-PERFORMANCE ALTERNATOR @ Automotive online store

HIGH-PERFORMANCE ALTERNATOR Durable, long lasting and ready to go—factory load tested prior to packaging for maximum performance upon installation Assembled using a machined deep "V" steel drive pulley—reduces the chance of high RPM belt failure Compatible with stock wiring harness Provides sufficient output at lower RPMs, eliminating engine stall atlow idle. Capable of both one and 2 wire applications. Hand detailed and inspected to ensure the highest level of custom acceptance possible. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2005066

T-TOP SEAL WEATHERSTRIPPING An economical way to repairdamaging rain and annoying wind leaks OEM quality Easy to install Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Metro Molded Parts
SKU: 10101-2008728

CRESCENT® SAE 4-PIECE PIVOTING-HEAD COMBINATION PROFESSIONAL-QUALITY RATCHETING WRENCH SETSimply flip wrench over to reverse the ratchet—faster than any other hand tool! Ratchet feature turns bolt with just a 5° swing versus a 30° for standard wrenches! 72-tooth ratchet mechanism is specially heat treated for strength Get your jobs done fast with THE BEST from Crescent®. 180° pivot head reaches into spots regular wrenches can't! Pivot feature also keeps ratchet in contact with fastener to maximize leverage and increase turning torque. Mirror-finished chrome-vanadium steel for durability and corrosion resistance. Ratchet feature eliminates need to lift and reposition wrench for each swing. Wrenches meet ANSI load specifications. SAE wrench sizes: 3/8", 7/16", 1/2", 9/16".
Manufacturer: Crescent
SKU: 10101-2007950

Treat you Jeep Wrangler or CJ to a brand new top with one of these economical kits by Bestop. See again through crystal-clear windows, or the new tinted window version. Replacement tops are designed to fit like a glove over the factory original top and door hardware. Installation is quick and easy. Just cut off the old and slip on the new. Factory-match colors assure that "showroom new" look. Tops are now available with Sun-Block windows for the three rear windows, instead of the standard clear windows. Door skins and all windows (zip-in for Wrangler) are included in all Replace-a-Top models.Please note that Bestop Replace-a-Tops will ONLY fit over the original top and door frames which were supplied with the vehicle new.If in doubt as to the origin of your top and door frames, please use our "LivePerson" customer service to contact one of our representatives or call toll free to speak to our customer service at 1-800-745-6037 (US and Canada) or 610-701-3336 for international customers. Original Top Replacement Tops are manufactured by Bestop to the same exact OEM standards as the tops they make for major manufacturers. ** Door Skins also available separately.**
SKU: 31032 01
Category: Miscellaneous

SIDE MARKER LIGHT AND FRONTPARKING/TURN SIGNAL ASSEMBLIES Custom-molded to replace original assemblies perfectly! Driver's or passenger's side available Meet or exceed all DOT and SAE requirements. Easy bolt-on installation with existing wiring and bulb holder.
SKU: 10101-2003470

STEEL SEAT FLOOR TO REAR FLOOR STEP BRACE REPAIR PANEL Repair rusted or damaged areayourself! Less expensive than shop prices For Jeep® CJs and Wranglers 19-gauge cold-rolled steel. Fits over or replaces original section. Can be welded in place. Trimming of original section may be required. Some bodywork experience may be necessary.
SKU: 10101-2000443

1976-79 CJ5 W/6 & 8 CYL,T-150 TRANS, COLLAPSED LENGT 18.25"
SKU: 52301 01
Category: Miscellaneous

Goodyear Cargo G26 Tire pricedfrom $114.00 to $131.00.
Manufacturer: Goodyear
SKU: Goodyear Cargo G26 Tire
Category: Automotive Parts and Accessories Parts Tires

PIAA 1400 Ion Dichroic Fog Kit priced from $195.00. PIAA 1400 Ion Dichroic Fog Kit pricedfrom $195.
Manufacturer: PIAA
SKU: PIAA 1400 Ion Dichroic Fog Kit
Category: Automotive Parts and Accessories Parts Accessories

DELUXE HAND RIVET GUN KIT Includes gun and 250 assorted rivets in 6 sizes Rivets hold securely, especially where vibration is a problem or where back side is inaccessible Easy-to-handle gun weighs less than 1-1/2 lbs. For use on copper, brass, tin, lead, steel, aluminum, pewter and zinc—virtually any material! Rivets won't easily rust or corrode or come loose. Kit includes heavy-duty rivet gun, powerful enough to do jobs fast. Gun has non-rust zinc alloy die-cast body with strong drop-forged handles and rubberized grips. Chain lock keeps handles closed. Durable fulcrum pin. Also included are 4 specially-hardened nosepieces for 3/32", 1/8", 5/32" and 3/16" diameter rivets. Nosepieces store in gun. 250 assorted aluminum rivets with steel mandrels in the following diameters: 1/8", 5/32" and 3/16". Griprange of 1/64" to 1/4". Hand wrench that stores in handle also included.
SKU: 10101-2008062

Perfect for pulling a personal watercraft, camper trailer or even a small boat. A drawbar style hitch allows you to correctly line up the bar with the trailer coupler. You can remove the ball mount when it is not needed, preventing you from banging into it with your knees and preventing thieves from "borrowing" it without your permissiion. All hardware, a neat protective receiver cover and easy to follow installation instructions included in your kit.
SKU: 62019 01
Category: Miscellaneous

HIGH INTENSITY DISCHARGE (HID) 6" ROUND LONG RANGE LIGHT KITS Produce jaw-dropping 600,000 candlepower per light! Patented 3-axis Daylighter® shock-mount base...competition rated Precision-ground optical glass lenses for perfect beam pattern and maximum clarity Also ideal on commercial, agricultural or industrial applications High Intensity Discharge (HID) technology provides much brighter, whiter light with less power and heat for a longerlife. Kit includes: pair of HID lights; 35-watt ballasts with plug-in terminals; fully assembled pre-terminated relay harness with weather proof plug connectors and illuminated push button switch; in-dash or under dash mount switch; mounting hardware; step-by-step wiring instructions and 2 exclusive KC™ HID covers. Accommodates 9-Volt to 16-Volt automotive type power supplies. 23-year warranty. NOTE: KC HID Lights are serial-numbered and serviced at KC only.
Manufacturer: KC Hilites
SKU: 10101-2010291

ON/OFF SWITCHES Choice of 4 illuminated colors or non-illuminated Easy to install in panel or dash Illuminated switches light when turned on Tough polycarbonate switches have colorful translucentlevers, positive on/off operation. Heavy-duty rated at 16 amps for 12-volt systems. Solderless blade-type terminals with connectors.
Manufacturer: Bonatrade International
SKU: 10101-2005011

SPORT SEAT SHIELD BENCH SEAT PROTECTOR Petproof! Kidproof!Waterproof! Durable nylon with waterproof urethane coating Protect seat from tough conditions—after a workout, day at the beach or rainy day Keeps expensive seats looking good despite your active lifestyle. Stretch material designed to fit a variety of seat models and sizes. A great way to cover old, worn upholstery. Machine washable.
Manufacturer: Grant
SKU: 10101-2006905

Consists of one Heavy-Duty Hook, Cable Clip, and all Nuts and Bolts. Unique design matches existing front frame holes on CJ's or Wranglers without any drilling. TJ fronts are a pair.
SKU: 12107 02
Category: Miscellaneous

COMPETITION RUSH SEATS Base mountedusing brackets (sold separately) Deep-sided bucketed support for comfort and stability on the road or track THE competition seat! Integral headpad, shoulder and lower back supports for a snug, comfortable seat. Perfect for high speed cornering! Full-steel construction with solid back and base for intrusion protection. Deep sides provide maximum lateral support. 5-point harness facility (harness sold separately). Durable nylon fabric with perforated vinyl headpad and side patches. Embroidered badge at top of seat.
SKU: 10101-2010357

TURN SIGNAL/WARNING LAMP FLASHER Replaces malfunctioning original perfectly Assures that turn signal and hazard warninglamps are operating properly Three prong for easy plug-in installation For '71-95 Volkswagen
Manufacturer: C E C Industries
SKU: 10101-2003363

Bridgestone Dueler H/T D840 Tire priced from $94.00to $111.00.
Manufacturer: Bridgestone
SKU: Bridgestone Dueler H/T D840 Tire
Category: Automotive Parts and Accessories Parts Tires

FRONT STEP Shipped separately from factory. NOTE: SKU numbers ending in F are factory shippedand may take a little longer to reach you.
SKU: 10101-2001857

MOTORCYCLE COVER CABLE AND LOCK Use to securecover and reduce risk of theft 31" plastic-covered wound cable with lock and 2 keys
Manufacturer: Dowco
SKU: 10101-2004499

WINDSHIELD ACCENT PANEL Replaces stock panel perfectly and covers that unsightly seam between windshield and fairing! Mounts to original-equipment fairing only using existing bolts For '80-87 GL1100 and GL1200 Interstate™, Aspencade®, Limited Edition and SEi modelsMade of steel.
SKU: 10101-2000639

TUBELESSMOBILE HOME TIRES Bias-ply tires replace originals perfectly DOT approved Choice of sizes and load ranges
Manufacturer: Duro Tire
SKU: 10101-2003958

Bridgestone 603V Tirepriced from $88.00 to $88.00.
Manufacturer: Bridgestone
SKU: Bridgestone 603V Tire
Category: Automotive Parts and Accessories Parts Tires

Bring your 258 engine into the 21st century. The Mopar Performance electronic fuel injection kit is the most comprehensive conversion kit on the market today. The kit replaces the stock intake manifold& carburetor and other major components to create true multi-port injection. Multi-port injection has a fuel injector for each cylinder that is activated sequentially in conjunction with the firing order to precisely control the individual cylinder's fuel requirements. This provides smooth trouble free operation that is free from flooding and flat spots.This kit is computer controlled and will self adjust to run equally well at sealevel to above 12,000 feet. Many components are based on '95 production Jeep parts that are readily available. The kit is emissions legal in all 50 states. Requires vibration damper. Add part 17005 50 or 17005 51.
SKU: 17005 00
Category: Miscellaneous

It's Jeep Live! Coming to your town. Not really, but this cool tee is reminiscent of the ones everyone wore in the 70's and 80's. You know the ones with the band on the front and the tour dates on the back. RockOn!
SKU: 15150 76
Category: Miscellaneous

How about a rugged steel replacement for your long suffering tailgate? Our tailgates are precision engineered for an exact fit. All holes are pre-punched and it comes primered. Needs some prep for painting. Plese specify the year andmodel when placing your order.
SKU: 12504 00
Category: Miscellaneous

RHINESTONE SKULL MOTORCYCLE BELT Features chrome-plated die-cast skulls with rhinestone eyes and hinged, movable jaws for middle section Black-dyed genuine leather end sections with1/4" chrome-plated flat-top stud accents 6 sizes available Metal-reinforced belt tip. Chrome-plated metal buckle (nonremovable) and keeper. Approx. 1-3/8"W. How to Order: Measure waist size over pants where belt is normally worn and order corresponding size. If between size ranges, order the larger size belt.
SKU: 10101-2000027

Optional carpeted covering for the InstaTrunk (#14047.01 and #14047.02)
SKU: 14058 09
Category: Miscellaneous

RECEIVER-MOUNT COMBINATION BALL HITCH/PINTLE HOOK For towing trailers with ball coupler or lunette rings Mounts in all 2" receiver tubes Up to 12,000-lb. gross tow weight rating and 2,400-lb. vertical-load rating New design allows towing of just about any trailer on the road! Design also eliminates need for a costly assembly consisting of a ball hitch, pintle mount and mounting hardware. Slides into and secures easily in existing receiver hitch. Spring-action lever locks unit in place on top of ball. Dual-locking setup for safety. Stores underseat or in trunk when not needed. Accepts pintle rings and lunette eye couplers. Heavy-duty drop-forged steel with corrosion-resistant powder-coat finish. Hitch ball made of hardened chrome-moly steel. Do not exceed rated capacity of receiver tube.
Manufacturer: Buyers Products
SKU: 10101-2004373

BLACK LEATHER FANNYPACKS Adjustable black nylon web belt with quick-release black plastic buckles Lined compartment and pockets with black zippers or flap closure (with hook/loop fasteners) Tired of sitting on your wallet or keys? Need extra pockets for small stuff or cell phone? Here's the perfect solution!
SKU: 10101-2000050

The Rack is different from other overhead racks for Jeep. It was designed to accommodate your hardtop or folding soft top, as well as to do a great job with your cargo! No bars running from front to rear to interfere with your top. Sturdy front and rear sections are self supporting, and feature quick releases to attach & remove each section in seconds. Attaches to existing windshield bolts at the front, and to spare tire at the rear. Perfect for canoes, kayaks and even plywood. Made of durable black epoxy painted steel to resist corrosion. Also holds two bicycles - mounted vertically - to keep bikes from crashing together. Versions for '87-'95 & '97-'00 Wrangler. Supports up to 150 lbs. Optional mirrors and ski rack sold separately.
SKU: 12031 00
Category: Miscellaneous

POLYESTER HALF-COVER Protect the top of your Honda Gold Wing® from the elements and birds! Great overnight protection (no more morning-dew seats) and summer sun protection (say goodbye to scorching seats and instruments) Extremely lightweight— goes on and comes off easily! Custom-tailored strong 75-denier polyester cover featuresreinforced and double-stitched seams. Weighs a lot less than most covers. Urethane coating keeps water and moisture away from your bike. Elasticized full-wraparound bottom hem and rustproof, nonscratching grommets (one on each side) with 2 stretch tie-down cords ensure a snug fit and no blow-off. Soft interior panel won't scratch windshield. Medium-light gray color.
SKU: 10101-2004509

REPLACEMENTSHACKLE KIT High-quality steel for superior strength for 1987-95 Jeep Wrangler. Comes complete with shackle, plate, stock rubber bushings and self-locking nuts
Manufacturer: Crown Automotive
SKU: 10101-2005901

STRAIGHT TAILPIPE TUBING Available in 7-ft length. Constructed of heavy-gauge steel with strong electricallywelded seams.
Manufacturer: Maremont
SKU: 10101-2006250

SUSPENSION SYSTEM KITS All components are designed to work together to ensure the best performance possible! "Get it dropped right the first time" for a radical new look plus improved performance! Choose the suspension kit that's just right for your vehicle!Kits drop front 1.8", rear 1.8". (A) Kits drop front 2.0", rear 2.0". (B) Kits drop front 1.5", rear 1.5".
SKU: 10101-2005837

Doors that are easy to remove for quick conversion into an adventure machine, are sometimes removed by the wrong people! Same pick-proof tubular locks as our high security boxes and consoles. Installs quickly for peace of mind. No drilling required. Bolts are zinc plated, not black**
SKU: 11150 01
Category: Miscellaneous

Supertop! The name says it all. And it's loaded with state-of-the-art features. All Supertops comeequipped with a patented track installation system. This eliminates snaps and give a continuous clean-looking weather tight seal. Supertops fold down on your Jeep without removal from the top frame and all of the hardware stays on the Jeep. No loose parts to get lost. Premium features include: Click-Shut two piece doors with flat paddle type handles, removable (and replaceable) windows, black powder coated aluminum and steel hardware.Each Supertop kit is complete with every piece of hardware that you need. Most hardware is factory pre-assembled to cut down on installation time. Nothing to extra to buy. Also has EZ Open tailgate hardware (for Wrangler and CJ7). VHS installation video is included with Supertops for use on vehicles up to 1995. Supertops are available for all Jeeps from 1955 to 2000 in a great selection of factory matched colors. (See additional pictures for additional information).

Designed to work with '76-'86 CJ7's & '87-'95 Wranglers that have full steel doors.
SKU: 11002 10
Category: Miscellaneous

GEN X 2 NITROUS UPGRADE SYSTEM Makes Your EFI Nitrous System Safe! Everything needed to protect your engine against damage caused by a nitrous system failure!Prevents your investment from running too rich or too lean Includes bottle heater, pressure gauge, fuel pressure safety switch, blow-down fitting/tube and purge valve.
SKU: 10101-2005740

CUSTOM-TAILORED CONVERTIBLE TOP BOOTS Replace your VW's original convertible top boot perfectly Choice of heavy-duty vinyl or top-quality cloth Snaps on like original Includes all necessary hardware and instructions. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reachyou.
Manufacturer: Acme Auto Headlining
SKU: 10101-2002711

SUPERCHARGER KIT Big 40% to 50% horsepower gains without gear noise or high pressures! The most practical, efficient and quiet centrifugal supercharger available! Hyperdyne™ Impeller delivers more low-RPM torque and horsepower than the competition Powerdyne runs cooler, reducing under-hood temperatures and ensuring a denser air/fuel charge for greater efficiency and maximum horsepower output. Silentdrive™ internal belt-drive system eliminates need to tap into engine oil system for lubrication—no oil lines, no oil reservoir, no rattle, whine orproblems common to gear-driven superchargers. Complete—includes everything you need for a professional installation. Advanced curved-blade Hyperdyne™ Impeller "grabs" the air to produce more pressure and flow at comparable RPM than any other centrifugal supercharger. At low speeds, it generates boost levels unmatched anywhere! Bolt-on installation—easier than other superchargers. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
Manufacturer: Powerdyne Automotive
SKU: 10101-2009411

JACOBS FC-1000/FC-2000PERFORMANCE IGNITION SYSTEM KITS Kit combines the best performance, power, precision and control in one super-tough package! The best-bang-for-your-buck ignition ever offered! Delivers up to 10,000 RPM for 8-cylinder vehicles, up to 20,0000 RPM for 4-cylinder vehicles with NO HIGH-END DROP OFF! System ensures the most complete and sustained ignition for easier starts, stronger pulling, lower ETs, smoother idle, reduced plug fouling and crisper throttle response. Capacitive discharge ignition with HEXFET solid-state firing technology and silicone-controlled rectifiers provides consistent, reliable and stable multisparking across 22° of crankshaft rotation—the spark interval stability of this analog ignition is superior to most digital ignitions. Perfect for race classes that prohibit digital engine controls. All circuits are encapsulated in a high-tech composite material to protect against extreme g-load impacts, hard acceleration and temperature extremes. Kit can be submerged in water for long periods. Special internal filters and low internal RFI reflectivity of the aluminum housing eliminate interference and line noise common to other ignitions. With connections for mag pick-up triggers, dedicated tachometer/EFI output lead and conventional input signal lead. All supply leads are soldered for maximum strength and corrosion resistance and feature built-in over-current protection. For 12-volt negative-ground systems. Due to the extremely high output of this system, Jacobs recommends use of the C-4 coil (sold separately) to prevent overloading original-equipment coil.
Manufacturer: Jacobs
SKU: 10101-2005126

WEBER PROGRESSIVE 2-BBL. CARBURETOR KIT Accelerate with 2-bbl. performance, cruise with 1-bbl. economy! Includes Weber32/36 DFEV carburetor with electric choke Includes carburetor (jetted for each application), aircraft-grade cast aluminum center-section manifold with zinc-plated isolated runner and heat riser tubes, EMPI chrome-plated air cleaner with washable gauze element and necessary hardware. Use with stock end castings (not included).
Manufacturer: EMPI
SKU: 10101-2005620

Look on any serious off-road Jeep and you will find polyurethane suspension bushings. Unlike common rubber bushings which lose their shape, and get softer over time, self-lubricating urethane bushings last and last. Polyurethane is not susceptible to the elements that destroy rubber such as oil, road salts, ultraviolet rays and dry rot. Energy Suspension is the world leader in polyurethane suspension components. Major efforts in researchand development in both chemical and mechanical engineering have enabled Energy Suspension to become number one.The entire manufacturing process is accomplished in-house to strictest standards. The result is precise suspension geometry, giving better tire wear, and reduced shimmy. Energy Suspension Polyurethane Bushings are now available '97 and later Wrangler subsystems such as Control Arms, Sway Bar Bushings, Spring Isolators, Engine and Transmission Mounts, Body Mounts and Bump Stops.
SKU: 16158 21
Category: Miscellaneous

MULTIPOSITION EXHAUST HANGER 360° swivel end and 5 bolt holes (oval shaped to allow precise adjustments) assure easiest mounting and positioning of ANY exhaust End swivels right or left Super strong for the most secure installation! Strap is made of extra-thick 8-ply rubber. Hanger is made of 11-gauge low-alloy steel. 2 attachment points help distribute rivet loadon center line of strap to reduce stress.
SKU: 10101-2006225

FRONT WHEELBEARING AND SEAL KITS Kit includes 2 front wheel bearings, 2 cups and 2 oil seals.
Manufacturer: Omix Ada
SKU: 10101-2003876

CHROMED AIR CLEANERS Check local emission laws before ordering For 1-, 2- and 4-bbl. carburetors. Choose 4" diam. x 3-1/4"H for 1- and 2-bbl. carburetors with 2", 2-5/8" or 2-5/16" neck; 10" diam. x 3-1/2"H for 2- and 4-bbl. carburetors with 2-5/8", 4-7/32" or 5-1/8" neck; 4-1/2" diam. x 3-1/2"H Louvered Air Cleaner for 1- and 2-bbl. carburetors with 2-5/8" neck; 14" diam. x 3"H for 4-bbl. carburetors with 4-7/32"or 5-1/8" neck; or Chromed Air Cleaner Shield for dress-up styling, fits any 14" diam. x 3"H air cleaner with lip. Check local emission laws before ordering.
Manufacturer: Make Waves Instrument
SKU: 10101-2005400

COMPLETE 8-PIECE EXHAUST NUT KIT High-quality original-equipment-type hardware for do-it-yourself repairs For 49-79 air-cooled Volkswagens Contains eight 12mm copper exhaust nuts
SKU: 10101-2006223

ROCK CRAWLER REAR BUMPERS WITH TIRE CARRIER 3-point mounting system supports oversized tires Special lock design keeps tire carrier secure while off road Grease fitting allows for easy swing out/swing in The perfect add-on to your Jeep® when you have oversized tires up to 35". Original Jeep® tailgates are unable to support the weight of an oversizedtire—especially when you are off-road. This bumper mount tire carrier takes the load off the tailgate and puts it on the frame mounted bumper. Durable powder coat painted 2" tubes and heavy-duty 1/4" steel plate design protects Jeep® from large rock outcroppings. Zinc under-coated, dual stage coat painted for long life. Sturdy 2" x .120" wall over-built powder coat painted steel construction. Fits Jeep® Wrangler including Unlimited. Adjustable tire carrier.
Manufacturer: Smittybilt
SKU: 10101-2010106

CLEAR TRUNK LIGHTS Add aunique, personal touch to your GL1800! Replace OEM lights Mount with existing hardware Red incandescent bulb included. Sold in pairs.
Manufacturer: Big Bike Parts
SKU: 10101-2010424

LITTELFUSE® 80 OR 160 PCFUSE KITS Economical kits include the most popular fuse sizes. Meet or exceed OEM specifications. With compartmentalized plastic storage box.
Manufacturer: Littlefuse
SKU: 10101-2005169

2" OIL PRESSURE GAUGE WITH 270° SWEEP Black face with backlit dial, black bezel, black mounting panels, white and yellow markings and red pointer Highly accurate, heavy-duty Bourdon tube meter movement270° sweep with 0-100 psi (0-100 kPa) range Perfectly replaces original. Tubing, fittings, hardware for mounting on, in or under dash and instructions (English/French/Spanish) included.
Manufacturer: Equus
SKU: 10101-2009638

Superior's Ring & Pinion Sets are manufactured to the highest quality standards Superior is a direct supplier to major automakers like Ford and General Motors. Their confidence of quality allows them to offer the longest warranty in the industry - 2 full years! They offer all of the most popular ratios to meet the needsof just about every owner. And now you are no longer limited to the 4.56 gear ratio. Introducing Superior's 4.88 Ring and Pinion Sets. The additional 7% torque multiplication roughly makes up the difference from 33" tires to 35" tires. If you run the bigger tires, you'll want these gears in your Jeep!When replacing 3.54 and numerically lower ratio gear set with a 3.73 or higher gear, the case must be changed to a 3.73 and higher case.
SKU: 52419 914
Category: Miscellaneous

Great for all exhaust components including manifolds and headers. POR-15 Black Velvet is the only black coating capable of withstanding extreme temperatures up to 1200° F. This high temp paint will maintain a rich black color and won't burn off. All POR High Temp Coatings can be used on both steel tube headers and cast iron exhaust manifolds.
SKU: 92156 202
Category: Miscellaneous

WINDSHIELD ACCESSORIES Shipped separately from factory. NOTE: SKU numbers ending in F are factory shippedand may take a little longer to reach you.
SKU: 10101-2000506

TRACTION SYSTEM No other locker can compare with Lock-Right™'s affordability, performance, durability and installation ease Designed for serious off-road use! Fully automatic! Delivers the most traction possible while providing full differential operation No matter if you're driving on dry roads or the slippery terrain, you can count on Lock-Right™ for powerful, smooth and dependable performance. The Lock-Right™ was the first locking differential that could be easily installed by the home do-it-yourselfer in about an hour and with no special tools, oils or control connections required. Proven worldwide in some of the harshest conditions imaginable, military, commercial and civilian vehicles have increased their traction performance with this system. It increases the traction by sending engine power to the wheels with the most traction at all times. Your 2WD with a Lock-Right™ will outperform most 4x4s, and your 4x4 with Lock-Right™ installed in both differentials will be virtually unstoppable. Eliminates excessive drivetrain damage and tire wear common with other lockers. Zytanium™ construction for maximum strength andreliability. No limited-slip clutches to wear out. Won't impair fuel economy. Installs easily in existing front or rear open differential case in about an hour. Replaces stock spider gears. Detailed instructions included. Limited 2-year warranty. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you.
SKU: 10101-2001148

Firestone Affinity LH30 Tire priced from $48.00 to $88.00. The Firestone Affinity LH30 with UNI-T provides the traction, treadwear and handling of premium All-Season tires…without a premium price. As its name implies, the Affinity LH30 was developed to meet the needs of the driver who desires to have the capabilities of their vehicle and its tires combine to provide ride quality, noise comfort and overall performance, as well as year-round traction, even in light snow. The AffinityLH30 with UNI-T provides everything most drivers expect from the tires on their family sedan or minivan…come rain or shine.On the outside, the Affinity LH30 with UNI-T radial features a silica enhanced all-season tread compound to enhance foul weather traction. The tread compound is molded into a deep symmetric tread design with three wide circumferential tread grooves to help evacuate water from under the tire’s footprint to resist hydroplaning, while additional grooves and sipes provide the biting ...
Manufacturer: Firestone
SKU: Firestone Affinity LH30 Tire
Category: Automotive Parts and Accessories Parts Tires

KC HiLITES™ ORIGINAL LIGHT COVERS The best way to protect your lights whileoff-roading! Available in different sizes, colors and graphics Let everyone know you've got the best!
Manufacturer: KC Hilites
SKU: 10101-2003773

TAILGATE SEAL KIT Automotive-grade rubber with pre-installed factory-style clips for easy installation Kit restores original look and structuralintegrity Do it yourself and save!!! Replaces weatherstrip on sides and bottom of tailgate.
Manufacturer: Fairchild Industries
SKU: 10101-2008645

OXYGEN-FREE INTERCONNECT Oxygen-free interconnects for the purestsound quality.
Manufacturer: Recoton
SKU: 10101-2009363

Full length side Bars extend from wheel arch to wheel arch & support up to 300 lbs. You'll appreciate subtle detailslike the hemispherical end-caps & pressed steel step area with no-slip step plates. No drilling is required for installation.
SKU: 12103 003
Category: Miscellaneous

Yokohama Y356 Tire priced from $56.00 to $69.00.
Manufacturer: Yokohama
SKU: Yokohama Y356 Tire
Category: Automotive Parts and Accessories Parts Tires

258"ENG (4.2L) 1976-79 (11" CLUTCH) PLATE, DISC AND BEARING
SKU: 52002 05
Category: Miscellaneous

These are the original and only genuineBikini Tops allowed to use the name. They are the #1 accessory for your Jeep. Bestop quality will long outlast the competition. Quick to attach and small to stow away, these sun tops to more than just look good. They protect your font seats and dashboard from sudden showers, and they keep them cool when parked in the blistering sun. The Super Bikini Tops have wrap around strap attachments for ease of installation Factory-matched colors in genuine (original spec) Haartz material.Jeeps with a hardtop only will need a windshield retaining channel, #11020.00
SKU: 21022 07
Category: Miscellaneous

These custom-cut four piece matsets are manufactured from durable high-grade automotive carpeting. Each mat is bonded to a rugged rubber backing to insure that your mats stay put. An affordable way to prevent wear and tear on your carpets and it adds extra sound deadening as well.

Special for a limited time only, from $39.95 now only $29.95
SKU: 24053 09
Category: Miscellaneous

ULTIMATE VEHICLE ANTI-THEFT SYSTEM Foolproof—lets you remove steering wheel when you park your Jeep®! If they can't steer it,they can't steal it! Easy and fast—takes less than 5 seconds to remove/reinstall wheel Superior to conventional security systems—unaffected by motion, doesn't rely on vehicle's battery and cannot be bypassed like ignition cut-off devices. Easy as 1, 2, 3. First, unlock your steering wheel with the security key. Then, trigger release knob, turn wheel and remove. Finally, snap the lock-out cap onto the steering column and remove key. Patented lock-out cap adds to the security of your Jeep®. Steering wheel can be locked in a safe location or taken with you. This system must be used with a Grant® Custom Steering Wheel and Grant® Steering Wheeling Mounting Kit (all sold separately).
Manufacturer: Grant
SKU: 10101-2001430